Re: [PATCH v2 4/4] media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement

Hi Tommaso,

On Wed, Jul 01, 2026 at 06:50:01PM +0200, Tommaso Merciai wrote:
> The RZ/G3E CRU programs the line stride via the AMnIS register, whose
> IS field encodes the value in units of 128 bytes. If bytesperline is
> not a multiple of 128, the division truncates and the hardware uses a
> wrong stride, causing horizontal banding.
> 
> Commit ace92ccef0c9 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
> replaced the open-coded aligned calculation with v4l2_fill_pixfmt(),
> which sets no alignment, reintroducing the issue.
> 
> Switch to v4l2_fill_pixfmt_aligned() with RZG2L_CRU_STRIDE_ALIGN when
> info->has_stride is set. RZ/G2L has no AMnIS register and keeps using
> v4l2_fill_pixfmt() unchanged.
> 
> Reviewed-by: Laurent Pinchart <[email protected]>
> Cc: [email protected]
> Fixes: ace92ccef0c9 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
> Signed-off-by: Tommaso Merciai <[email protected]>
> ---
> v1->v2:
>  - Collected tag
>  - Add missing Cc stable

The problem with this is that it requires v4l2_fill_pixfmt_aligned() that's
not Cc'd to stable. Can this be fixed first without introducing the use of
v4l2_fill_pixfmt_aligned() (cc'd to stable, i.e. in this patch), followed
by another one switching to v4l2_fill_pixfmt_aligned()?

>  - Fix s/commit/Commit/ into commit body
> 
>  drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c
> index 69346a585f9f..478264f26466 100644
> --- a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c
> @@ -860,7 +860,8 @@ static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru,
>  	v4l_bound_align_image(&pix->width, 320, info->max_width, 1,
>  			      &pix->height, 240, info->max_height, 0, 0);
>  
> -	v4l2_fill_pixfmt(pix, pix->pixelformat, pix->width, pix->height);
> +	v4l2_fill_pixfmt_aligned(pix, pix->pixelformat, pix->width, pix->height,
> +				 info->has_stride ? RZG2L_CRU_STRIDE_ALIGN : 1);
>  
>  	dev_dbg(cru->dev, "Format %ux%u bpl: %u size: %u\n",
>  		pix->width, pix->height, pix->bytesperline, pix->sizeimage);

-- 
Regards,

Sakari Ailus