[PATCH v2 02/16] drm: renesas: rzg2l_mipi_dsi: Add dphyctrl0_init_val to hw_info

From: Biju Das <[email protected]>

Move the DSIDPHYCTRL0 initialization value into the hw_info structure as
dphyctrl0_init_val, allowing SoC-specific D-PHY control register
initialization to be defined per compatible. This prepares the driver for
supporting SoCs that require a different initial DSIDPHYCTRL0 value.

Signed-off-by: Biju Das <[email protected]>
---
v1->v2:
 * No change.
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index 0590ade96b91..2128fd16ebc9 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -56,6 +56,7 @@ struct rzg2l_mipi_dsi_hw_info {
 	} cpg_plldsi;
 	u32 phy_reg_offset;
 	u32 link_reg_offset;
+	u32 dphyctrl0_init_val;
 	unsigned long min_dclk;
 	unsigned long max_dclk;
 	u8 features;
@@ -493,9 +494,7 @@ static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
 	}
 
 	/* Initializing DPHY before accessing LINK */
-	dphyctrl0 = DSIDPHYCTRL0_CAL_EN_HSRX_OFS | DSIDPHYCTRL0_CMN_MASTER_EN |
-		    DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 | DSIDPHYCTRL0_EN_BGR;
-
+	dphyctrl0 = dsi->info->dphyctrl0_init_val;
 	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYCTRL0, dphyctrl0);
 	usleep_range(20, 30);
 
@@ -1531,6 +1530,8 @@ static const struct rzg2l_mipi_dsi_hw_info rzg2l_mipi_dsi_info = {
 	.dphy_exit = rzg2l_mipi_dsi_dphy_exit,
 	.dphy_conf_clks = rzg2l_dphy_conf_clks,
 	.link_reg_offset = 0x10000,
+	.dphyctrl0_init_val = DSIDPHYCTRL0_CAL_EN_HSRX_OFS | DSIDPHYCTRL0_CMN_MASTER_EN |
+			      DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 | DSIDPHYCTRL0_EN_BGR,
 	.min_dclk = 5803,
 	.max_dclk = 148500,
 };
-- 
2.43.0