Re: [PATCH v2 04/10] dt-bindings: net: pcs: add rockchip,rk3568-xpcs binding

Hi Krzysztof,

Krzysztof Kozlowski <[email protected]> 于2026年8月6日周四 14:49写道：
> I don't understand any of these. There are none of my quotes. I don't
> get what you are referring to.

Sorry for the confusing previous reply, I didn't quote your original
comments properly. Here's a clean response with your points quoted.

Krzysztof Kozlowski <[email protected]> 于2026年8月5日周三 15:29写道：
>
> On Sat, Aug 01, 2026 at 10:22:28PM +0800, Coia Prant wrote:
> > Add device tree binding documentation for the Synopsys DesignWare
> > XPCS integrated on the Rockchip RK3568 SoC.
> >
> > The XPCS is accessed over the APB3 bus and internally connected to
> > a Naneng Combo SerDes PHY.  It supports 1000BASE-X, SGMII, and
> > QSGMII modes, with four MII ports.
> >
> > The binding describes:
> > - Required properties: compatible, reg, clocks, clock-names
> > - Optional properties: phys, phy-names, power-domains
> > - pcs-mii sub-nodes for each MII port (reg 0..3)
>
> Irrelevant paragraph. We can read the diff. Drop.
> A nit, subject: drop second/last, redundant "binding". The
> "dt-bindings" prefix is already stating that these are bindings.
> See also:
> https://elixir.bootlin.com/linux/v7.1-rc7/source/Documentation/devicetree/bindings/submitting-patches.rst#L23

Okay. I will drop these in v3.

> > +properties:
> > +  compatible:
> > +    const: rockchip,rk3568-xpcs
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 0
>
> reg is always the second property.
>
> Also, use consistent style of quotes.

Okay.

> > +
> > +  reg:
> > +    description: |
> > +      Base address and size of the XPCS register space mapped over the
> > +      APB3 bus.
>
> Drop description, redundant.

I'll drop the redundant description paragraph from the commit message
and keep only the essential information.

> > +    maxItems: 1
> > +
> > +  clocks:
> > +    description: |
> > +      Clock sources for the XPCS:
> > +      - csr: APB3 bus interface clock (clk_csr_i), required for register
> > +        access.
> > +      - eee: EEE clock (clk_eee_i), required for Energy Efficient
> > +        Ethernet (EEE) operation.
> > +    minItems: 2
> > +    maxItems: 2
>
> No, instead list items with description.

I'll change to items with descriptions.

> > +
> > +  clock-names:
> > +    items:
> > +      - const: csr
> > +      - const: eee
> > +
> > +  phys:
> > +    description: |
>
> Do not need '|' unless you need to preserve formatting.

I'll remove unnecessary '|' where not needed.

> > +      The phandle of SerDes PHY (Naneng Combo PHY) that provides
> > +      the serial lanes for 1000BASE-X / SGMII / QSGMII.
> > +      The SerDes must be powered on and initialised before any XPCS
> > +      register access.
> > +    maxItems: 1
> > +
> > +  phy-names:
> > +    const: serdes
> > +
> > +  power-domains:
> > +    description: |
> > +      Power domain for the XPCS.
>
> Drop sentence and |

I'll drop the redundant part.

> > +      On RK3568 this is typically the PD_PIPE power domain, which also
> > +      supplies the SerDes PHY.
> > +    maxItems: 1
> > +
> > +patternProperties:
> > +  "^pcs-mii@[0-3]$":
>
> Why `git grep pcs-mii@` gives me no results? Are you doing this
> similarly to existing devices or is this quite different device than
> every other hardware?

I used "pcs-mii" because the Rockchip TRM refers to these as "MII ports"
and they are functionally PCS instances. I see a similar pattern in the
Renesas RZN1 MIIC binding (renesas,rzn1-miic.yaml), which uses
"mii-conv@[0-5]$" for its ports.

If you prefer a different name (e.g., "port@0"-"port@3"), I'm happy to
change it. Please let me know.

> > +    type: object
> > +    description: |
>
> Same here
>
> > +      One of the four MII ports of the XPCS.
> > +      The port number is specified by the reg property (0..3).
>
> Drop sentence, redundant. Schema tells that.

I'll fix this to use items with min/max.

> > +      The port is linked to an Ethernet MAC controller via the
> > +      pcs-handle property in the MAC's device tree node.
> > +
> > +    properties:
> > +      reg:
> > +        minimum: 0
> > +        maximum: 3
> > +        description: |
>
> As well
>
> > +          MII port number of PCS.
> > +
> > +      status: true
>
> Nope, do you see anywhere code like this?

I'll remove this generic property.

Thanks,
Coia