[PATCH v4 10/15] rtc: rzn1: Use temporary variable for struct device

From: Lad Prabhakar <[email protected]>

Use a temporary variable for the struct device pointers to avoid
dereferencing.

Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
---
v3->v4:
- No changes.

v2->v3:
- No changes.

v1->v2:
- Added Reviewed-by tag.
---
 drivers/rtc/rtc-rzn1.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/rtc/rtc-rzn1.c b/drivers/rtc/rtc-rzn1.c
index 9eceeed14486..e67bc8831cb7 100644
--- a/drivers/rtc/rtc-rzn1.c
+++ b/drivers/rtc/rtc-rzn1.c
@@ -385,13 +385,14 @@ static void rzn1_rtc_disable_hardware(void *data)
 
 static int rzn1_rtc_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	unsigned long rate = 32768;
 	struct rzn1_rtc *rtc;
 	u32 val, scmp_val = 0;
 	struct clk *xtal;
 	int irq, ret;
 
-	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
 	if (!rtc)
 		return -ENOMEM;
 
@@ -399,13 +400,13 @@ static int rzn1_rtc_probe(struct platform_device *pdev)
 
 	rtc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(rtc->base))
-		return dev_err_probe(&pdev->dev, PTR_ERR(rtc->base), "Missing reg\n");
+		return dev_err_probe(dev, PTR_ERR(rtc->base), "Missing reg\n");
 
 	irq = platform_get_irq_byname(pdev, "alarm");
 	if (irq < 0)
 		return irq;
 
-	rtc->rtcdev = devm_rtc_allocate_device(&pdev->dev);
+	rtc->rtcdev = devm_rtc_allocate_device(dev);
 	if (IS_ERR(rtc->rtcdev))
 		return PTR_ERR(rtc->rtcdev);
 
@@ -413,19 +414,19 @@ static int rzn1_rtc_probe(struct platform_device *pdev)
 	rtc->rtcdev->range_max = RTC_TIMESTAMP_END_2099;
 	rtc->rtcdev->alarm_offset_max = 7 * 86400;
 
-	ret = devm_pm_runtime_enable(&pdev->dev);
+	ret = devm_pm_runtime_enable(dev);
 	if (ret < 0)
 		return ret;
-	ret = pm_runtime_resume_and_get(&pdev->dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
 		return ret;
 
-	ret = devm_add_action_or_reset(&pdev->dev, rzn1_rtc_disable_hardware, &pdev->dev);
+	ret = devm_add_action_or_reset(dev, rzn1_rtc_disable_hardware, dev);
 	if (ret)
 		return ret;
 
 	/* Only switch to scmp if we have an xtal clock with a valid rate and != 32768 */
-	xtal = devm_clk_get_optional(&pdev->dev, "xtal");
+	xtal = devm_clk_get_optional(dev, "xtal");
 	if (IS_ERR(xtal)) {
 		return PTR_ERR(xtal);
 	} else if (xtal) {
@@ -469,9 +470,9 @@ static int rzn1_rtc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&rtc->ctl1_access_lock);
 
-	ret = devm_request_irq(&pdev->dev, irq, rzn1_rtc_alarm_irq, 0, "RZN1 RTC Alarm", rtc);
+	ret = devm_request_irq(dev, irq, rzn1_rtc_alarm_irq, 0, "RZN1 RTC Alarm", rtc);
 	if (ret) {
-		dev_err(&pdev->dev, "RTC alarm interrupt not available\n");
+		dev_err(dev, "RTC alarm interrupt not available\n");
 		return ret;
 	}
 
@@ -479,12 +480,12 @@ static int rzn1_rtc_probe(struct platform_device *pdev)
 	if (irq == -EPROBE_DEFER)
 		return irq;
 	if (irq >= 0)
-		ret = devm_request_irq(&pdev->dev, irq, rzn1_rtc_1s_irq, 0, "RZN1 RTC 1s", rtc);
+		ret = devm_request_irq(dev, irq, rzn1_rtc_1s_irq, 0, "RZN1 RTC 1s", rtc);
 
 	if (irq < 0 || ret) {
 		set_bit(RTC_FEATURE_ALARM_RES_MINUTE, rtc->rtcdev->features);
 		clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->rtcdev->features);
-		dev_warn(&pdev->dev, "RTC pps interrupt not available. Alarm has only minute accuracy\n");
+		dev_warn(dev, "RTC pps interrupt not available. Alarm has only minute accuracy\n");
 	}
 
 	return devm_rtc_register_device(rtc->rtcdev);
-- 
2.43.0