[PATCH v3 0/2] arm64: dts: renesas: rzt2h-n2h-evk: Add LCDC overlays for RZ/T2H and RZ/N2H EVKs

From: Lad Prabhakar <[email protected]>

Hi all,

This patch series adds Device Tree overlays for the LCDC on the RZ/T2H
and RZ/N2H EVKs. The overlays configure the necessary pin multiplexing
and settings for the LCDC to function correctly with the ADV7513 HDMI
transmitter.

Note:
- patch #2 is from series [0] as rest of the patches are already merged
  in renesas-tree sending this patch as a v3.
- patches apply on top of renesas-devel/renesas-dts-for-v7.4 branch

v2->v3:
- patch #1 is a new patch
- Renamed HEADER_IRQ8 to IRQ8
- Added irq support for the ADV7513 in the overlays
- Corrected the DIP switch settings for I2C_SDA1/I2C_SCL1
- Added missing DIP switch settings for LCDC_DATG3
- MOved the header include at the end
- Added a comment for i2c0 as to why it is disabled in the overlay
- Split up the du_pinctrl into a group of pins as only sync/de pins
  needed to set slew-rate=0, the rest of the pins can use slew-rate=1
- Updated commit message for patch #2 to reflect the changes in v3

[0] https://lore.kernel.org/all/[email protected]/

Cheers,
Prabhakar

Lad Prabhakar (2):
  arm64: dts: renesas: rzt2h-n2h-evk: Use consistent switch notation
  arm64: dts: renesas: Add LCDC overlays for RZ/T2H and RZ/N2H EVKs

 arch/arm64/boot/dts/renesas/Makefile          |  6 ++
 .../renesas/r9a09g077m44-evk-cn15-lcdc.dtso   | 53 ++++++++++++++
 .../dts/renesas/r9a09g077m44-rzt2h-evk.dts    | 18 ++---
 .../renesas/r9a09g087m44-evk-cn20-lcdc.dtso   | 63 ++++++++++++++++
 .../dts/renesas/r9a09g087m44-rzn2h-evk.dts    | 32 +++++----
 .../dts/renesas/rzt2h-n2h-evk-du-adv7513.dtsi | 72 +++++++++++++++++++
 6 files changed, 221 insertions(+), 23 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g077m44-evk-cn15-lcdc.dtso
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g087m44-evk-cn20-lcdc.dtso
 create mode 100644 arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-du-adv7513.dtsi

-- 
2.43.0