Re: [PATCH v3 6/8] can: rcar_canfd: Add support for Renesas RZ/G3S
Geert Uytterhoeven <[email protected]>
| Newsgroups | org.kernel.vger.linux-renesas-soc,org.kernel.vger.linux-can,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <CAMuHMdXMhfr=rp9G8X-+=AR5vqW5VrJfrKwjVrHEKk_kJOh0ZQ@mail.gmail.com> |
Hi Claudiu, On Tue, 14 Jul 2026 at 19:33, Claudiu Beznea <[email protected]> wrote: > From: Claudiu Beznea <[email protected]> > > Add support for Renesas RZ/G3S > > The Renesas RZ/G3S CAN-FD controller is largely compatible with the > variant found on the Renesas RZ/G3E. The main differences are: > - the RZ/G3S provides 16 AFL pages > - the RZ/G3S supports only two channels > - the RZ/G3S supports only CAN-FD operation and does not implement the > bits used to select between classical CAN-only and CAN FD-only modes. > - the RZ/G3S includes an internal divider that allows the peripheral > clock to be used as the CAN FD clock source. > > Add support for the Renesas RZ/G3S. > > Reviewed-by: Biju Das <[email protected]> > Signed-off-by: Claudiu Beznea <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds