Re: [PATCH v2 1/5] dt-bindings: rtc: Add pinctrl for S35390A

On Sat, Aug 01, 2026 at 06:43:00PM +0000, Markus Probst wrote:
> +  wakeup-parent: true
> +
> +  wakeup-source: true
> +
> +required:
> +  - compatible
> +  - reg
> +
> +patternProperties:

This goes after "properties:" block.


> +  "^pins":
> +    type: object
> +    patternProperties:
> +      "-pins$":
> +        type: object
> +        properties:
> +          pins:
> +            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins
> +
> +          sii,mode:
> +            $ref: /schemas/types.yaml#/definitions/uint32

Use simple string. See pinmux bindings.

> +            description: |
> +              Modes for the specific pin:
> +              - S35390A_MODE_IGNORE: Preserve the previous state.
> +              - S35390A_MODE_DISABLE: Disable all interrupts.
> +              - S35390A_MODE_WAKEUP: Used for waking up the system.
> +              - S35390A_MODE_ALARM: Userspace defined alarm.
> +              - S35390A_MODE_FREQ: Periodical at configurable frequency.
> +              - S35390A_MODE_PMIN1: Minute periodical output with 50% duty.
> +              - S35390A_MODE_PMIN2: Minute periodical output L for 7.81 ms.
> +                                    Can only be used with pin INT1.
> +              - S35390A_MODE_32768KHZ: Raw 32.768 kHz output.
> +                                       Can only be used with pin INT1.
> +            minimum: 0
> +            maximum: 7
> +
> +          sii,frequency:

Frequency needs -hz, but anyway if this is becoming a clock, then you
must have clocks property and this is simply not needed... unless this
is some periodical wakeup call, not a clock? Then simply -hz and
property must be more descriptive (frequency of what? pulse?).


> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            description: Frequency in Hz to be used with mode S35390A_MODE_FREQ.
> +            minimum: 1
> +            maximum: 31
> +
> +        required:
> +          - sii,mode
> +
> +        if:
> +          properties:
> +            sii,mode:
> +              const: 4
> +        then:
> +          required:
> +            - sii,frequency
> +        else:
> +          properties:
> +            sii,frequency: false
> +
> +        additionalProperties: false
> +
> +    additionalProperties: false
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/rtc/s35390a.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        rtc: rtc@30 {

Drop unused label

> +            compatible = "sii,s35390a";
> +            reg = <0x30>;
> +            pinctrl-0 = <&rtc_pins_default>;
> +            pinctrl-names = "default";
> +
> +            wakeup-parent = <&int>;
> +
> +            rtc_pins_default: pins {
> +              int1-pins {
> +                pins = S35390A_PIN_INT1;
> +                sii,mode = <S35390A_MODE_WAKEUP>;
> +              };
> +              int2-pins {
> +                pins = S35390A_PIN_INT2;
> +                sii,mode = <S35390A_MODE_DISABLE>;
> +              };
> +            };
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> index f4d0eed98a08..7b3f682ef4d5 100644
> --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
> @@ -81,8 +81,6 @@ properties:
>        - ricoh,rv5c386
>        # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
>        - ricoh,rv5c387a
> -      # 2-wire CMOS real-time clock
> -      - sii,s35390a
>        # ST SPEAr Real-time Clock
>        - st,spear600-rtc
>        # VIA/Wondermedia VT8500 Real-time Clock
> @@ -105,5 +103,4 @@ required:
>    - reg
>  
>  additionalProperties: false
> -
>  ...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 716acfc3d7c1..c85be1eefdb1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -22696,6 +22696,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git
>  F:	Documentation/admin-guide/rtc.rst
>  F:	Documentation/devicetree/bindings/rtc/
>  F:	drivers/rtc/
> +F:	include/dt-bindings/rtc/
>  F:	include/linux/rtc.h
>  F:	include/linux/rtc/
>  F:	include/uapi/linux/rtc.h
> diff --git a/include/dt-bindings/rtc/s35390a.h b/include/dt-bindings/rtc/s35390a.h
> new file mode 100644
> index 000000000000..dcd0ca15f9e9
> --- /dev/null
> +++ b/include/dt-bindings/rtc/s35390a.h
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */
> +
> +#ifndef __DT_BINDINGS_RTC_S35390A_H
> +#define __DT_BINDINGS_RTC_S35390A_H
> +
> +#define S35390A_MODE_IGNORE		0x0
> +#define S35390A_MODE_DISABLE		0x1
> +#define S35390A_MODE_WAKEUP		0x2
> +#define S35390A_MODE_ALARM		0x3
> +#define S35390A_MODE_FREQ		0x4
> +#define S35390A_MODE_PMIN1		0x5
> +#define S35390A_MODE_PMIN2		0x6
> +#define S35390A_MODE_32768KHZ		0x7
> +
> +#define S35390A_MODE_INT1_MAX		0x7
> +#define S35390A_MODE_INT2_MAX		0x5
> +
> +#define S35390A_FREQ_MASK		0x1F

 don't get why this grew. None of these look like bindings.


> +
> +#define S35390A_PIN_INT1		"int1"
> +#define S35390A_PIN_INT2		"int2"

Drop entire header.

> +
> +#endif /* __DT_BINDINGS_RTC_S35390A_H */
> 
> -- 
> 2.54.0
>