[PATCH 1/2] dt-bindings: soc: qcom: qcom,pmic-glink: Document RTC client properties
Kamal Wadhwa <[email protected]>
| Newsgroups | org.kernel.vger.linux-rtc,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
The pmic_glink driver can now register an RTC auxiliary device on glymur, whose PMIC exposes an RTC over GLINK (see rtc-glink driver). Document the allow-set-time flag it consumes from the parent pmic-glink node. Assisted-by: Claude:claude-sonnet-5 Signed-off-by: Raj Aryan <[email protected]> Signed-off-by: Kamal Wadhwa <[email protected]> --- Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index 16ad4f5698fc..38db1ff473c0 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -79,6 +79,11 @@ properties: - const: charge_limit_end - const: charge_limit_delta + allow-set-time: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that the setting of RTC time is allowed by the host CPU. + patternProperties: '^connector@\d$': $ref: /schemas/connector/usb-connector.yaml# -- 2.43.0