Re: [PATCH v6 11/17] rtc: rzn1: Dynamically calculate synchronization delay based on clock rate
| Newsgroups | org.kernel.vger.linux-rtc,org.kernel.vger.linux-devicetree |
|---|---|
| Message-ID | <[email protected]> |
> From: Lad Prabhakar <[email protected]> > > Replace the hardcoded hardware synchronization delays with a calculated > time window derived from the operating sub-clock frequency. > > The driver currently hardcodes microsecond ranges assuming a fixed > sub-clock frequency of 32.768 kHz. Newer SoC variants, such as the > RZ/T2H, drive this hardware block using a much faster clock rate > (~195.3 kHz). Hardcoding these wait windows forces faster blocks to > over-sleep, introducing unnecessary delays during clock initialization > and register configuration. > > Calculate the duration of the required clock cycles in microseconds based > on the runtime clock rate, and store this value in the driver private > structure to adjust the usleep_range() and readl_poll_timeout() boundaries > dynamically. > > Signed-off-by: Lad Prabhakar <[email protected]> Sashiko has reviewed this patch and found no issues. It looks great! -- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=11