Re: [PATCH RESEND v4 0/3] drm/bridge: sii9234: use extcon to detect cable attachment

Marek Szyprowski <[email protected]>
Newsgroups org.kernel.vger.linux-samsung-soc,org.freedesktop.lists.dri-devel,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
+CC: Luca

On 30.06.2026 14:43, Henrik Grimler wrote:
> Hello,
>
> Friendly ping! This series has been reviewed/tested and still applies
> cleanly on drm-misc-next, could it be merged?
>
> Best regards,
> Henrik Grimler
>
> On Tue, Jun 02, 2026 at 08:36:47PM +0200, Henrik Grimler wrote:
>> Hi,
>>
>> This series fixes so HDMI through the sii9234 MHL chip works when
>> cable is hotplugged, by making the MHL chip use extcon cable detection
>> functions. Patch 3, that actually implements the extcon parts, is heavily
>> inspired by commit 688838442147 ("drm/bridge/sii8620: use micro-USB
>> cable detection logic to detect MHL") by Maciej Purski.
>>
>> Before these changes, HDMI only worked if cable was plugged in before
>> booting. If no cable was connected, then wlr-randr still showed HDMI
>> as connected, with 0x0 px, which confused at least some UIs (phosh)
>> and caused problems:
>> https://gitlab.gnome.org/World/Phosh/phosh/-/issues/828
>>
>> Tested on exynos4412-i9305.
>>
>> Best regards,
>> Henrik Grimler
>>
>> Signed-off-by: Henrik Grimler <[email protected]>
>> ---
>> Changes in v4:
>> - Collect tags
>> - Link to v3: https://lore.kernel.org/r/[email protected]
>>
>> Changes in v3:
>> - Fix return of dev_err_probe in patch 2 and patch 3, spotted by
>>   Dmitry and Marek respectively.
>> - Change to depends on EXTCON || !EXTCON instead of select
>> - Collect tags for patch 1 (not 3 since there were (minor) changes)
>> - Link to v2: https://lore.kernel.org/r/[email protected]
>>
>> Changes in v2:
>> - Add dependency on extcon in patch 3. Issue reported by kernel test robot <[email protected]>
>> - Link to v1: https://lore.kernel.org/r/[email protected]
>>
>> ---
>> Henrik Grimler (3):
>>       drm/bridge: sii9234: fix some typos in comments and messages
>>       drm/bridge: sii9234: use dev_err_probe where applicable
>>       drm/bridge: sii9234: use extcon cable detection logic to detect MHL
>>
>>  drivers/gpu/drm/bridge/Kconfig   |   1 +
>>  drivers/gpu/drm/bridge/sii9234.c | 124 +++++++++++++++++++++++++++++++--------
>>  2 files changed, 102 insertions(+), 23 deletions(-)
>> ---
>> base-commit: a87fef0880c4f52769b5a3c2fc1b2d73aaa04eb3
>> change-id: 20231218-exynos4-sii9234-driver-d817d4b511d5
>>
>> Best regards,
>> -- 
>> Henrik Grimler <[email protected]>
>>
Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.