[PATCH v2 11/11] ARM: s3c: crag6410: convert basic-mmio-gpio and LEDs to software properties

Convert the basic-mmio-gpio device and the GPIO-controlled LEDs on the
Cragganmore 6410 board to use software nodes/properties. This allows
removing the crag_leds_table GPIO lookup table.

Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <[email protected]>
---
 arch/arm/mach-s3c/mach-crag6410.c | 117 +++++++++++++++++++++-----------------
 1 file changed, 64 insertions(+), 53 deletions(-)

diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 03a97a20e38c..b48980920aee 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -319,12 +319,17 @@ static const struct property_entry crag6410_mmgpio_props[] = {
 	{ }
 };
 
+static const struct software_node crag6410_mmgpio_node = {
+	.name		= "basic-mmio-gpio",
+	.properties	= crag6410_mmgpio_props,
+};
+
 static struct platform_device_info crag6410_mmgpio_devinfo = {
 	.name		= "basic-mmio-gpio",
 	.id		= -1,
 	.res		= crag6410_mmgpio_resource,
 	.num_res	= ARRAY_SIZE(crag6410_mmgpio_resource),
-	.properties	= crag6410_mmgpio_props,
+	.swnode		= &crag6410_mmgpio_node,
 };
 
 static struct platform_device speyside_device = {
@@ -839,61 +844,68 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
 	.host_caps		= MMC_CAP_POWER_OFF_CARD,
 };
 
-static const struct gpio_led gpio_leds[] = {
-	{
-		.name = "d13:green:",
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d14:green:",
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d15:green:",
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d16:green:",
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d17:green:",
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d18:green:",
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d19:green:",
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d20:green:",
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
+static const struct software_node crag6410_leds_node = {
+	.name = "leds-gpio",
 };
 
-static struct gpiod_lookup_table crag_leds_table = {
-	.dev_id = "leds-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("basic-mmio-gpio", 0, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("basic-mmio-gpio", 1, "cs", 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("basic-mmio-gpio", 2, "cs", 2, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("basic-mmio-gpio", 3, "cs", 3, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("basic-mmio-gpio", 4, "cs", 4, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("basic-mmio-gpio", 5, "cs", 5, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("basic-mmio-gpio", 6, "cs", 6, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("basic-mmio-gpio", 7, "cs", 7, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
+#define CRAG6410_LED_NODE(_idx, _name)					\
+static const struct property_entry crag6410_led##_idx##_props[] = {	\
+	PROPERTY_ENTRY_STRING("label", _name),				\
+	PROPERTY_ENTRY_GPIO("gpios", &crag6410_mmgpio_node,		\
+			    _idx, GPIO_ACTIVE_LOW),			\
+	PROPERTY_ENTRY_STRING("default-state", "on"),			\
+	{ }								\
+};									\
+static const struct software_node crag6410_led##_idx##_node = {	\
+	.parent = &crag6410_leds_node,					\
+	.properties = crag6410_led##_idx##_props,			\
+}
 
-static const struct gpio_led_platform_data gpio_leds_pdata = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
+CRAG6410_LED_NODE(0, "d13:green:");
+CRAG6410_LED_NODE(1, "d14:green:");
+CRAG6410_LED_NODE(2, "d15:green:");
+CRAG6410_LED_NODE(3, "d16:green:");
+CRAG6410_LED_NODE(4, "d17:green:");
+CRAG6410_LED_NODE(5, "d18:green:");
+CRAG6410_LED_NODE(6, "d19:green:");
+CRAG6410_LED_NODE(7, "d20:green:");
+
+static const struct software_node *crag6410_leds_swnodes[] = {
+	&crag6410_leds_node,
+	&crag6410_led0_node,
+	&crag6410_led1_node,
+	&crag6410_led2_node,
+	&crag6410_led3_node,
+	&crag6410_led4_node,
+	&crag6410_led5_node,
+	&crag6410_led6_node,
+	&crag6410_led7_node,
+	NULL
 };
 
+static void __init crag6410_setup_leds(void)
+{
+	struct platform_device_info leds_info = {
+		.name	= "leds-gpio",
+		.id	= PLATFORM_DEVID_NONE,
+	};
+	struct platform_device *pd;
+	int err;
+
+	err = software_node_register_node_group(crag6410_leds_swnodes);
+	if (err) {
+		pr_err("failed to register leds software nodes: %d\n", err);
+		return;
+	}
+
+	leds_info.fwnode = software_node_fwnode(&crag6410_leds_node);
+
+	pd = platform_device_register_full(&leds_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("failed to create leds-gpio device: %d\n", err);
+}
+
 static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
 
 static const struct software_node_ref_args crag6410_spi0_gpio_refs[] = {
@@ -972,13 +984,12 @@ static void __init crag6410_machine_init(void)
 	platform_add_devices(crag6410_devs0, ARRAY_SIZE(crag6410_devs0));
 	platform_device_register_full(&crag6410_mmgpio_devinfo);
 
-	gpiod_add_lookup_table(&crag_leds_table);
 	crag6410_setup_keypad();
 	crag6410_setup_gpio_keys();
 	crag6410_setup_spi0();
 
 	platform_add_devices(crag6410_devs1, ARRAY_SIZE(crag6410_devs1));
-	gpio_led_register_device(-1, &gpio_leds_pdata);
+	crag6410_setup_leds();
 
 	regulator_has_full_constraints();
 

-- 
2.55.0.795.g602f6c329a-goog