[PATCH v3 06/10] ARM: s3c: crag6410: use software nodes/properties to set up GPIO keys

Switch the gpio-keys device to use software nodes/properties to
describe the buttons and switches. This will allow dropping support
for platform data from the gpio-keys driver in the future.

Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
---
 arch/arm/mach-s3c/mach-crag6410.c | 79 ++++++++++++++++++++++++++++-----------
 1 file changed, 58 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index c2df5dcb3368..757c0f383ff1 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -18,6 +18,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/leds.h>
 #include <linux/delay.h>
 #include <linux/mmc/host.h>
@@ -228,32 +229,68 @@ static void __init crag6410_setup_keypad(void)
 		pr_err("failed to instantiate keypad device\n");
 }
 
-static struct gpio_keys_button crag6410_gpio_keys[] = {
-	[0] = {
-		.code	= KEY_SUSPEND,
-		.gpio	= S3C64XX_GPL(10),	/* EINT 18 */
-		.type	= EV_KEY,
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	[1] = {
-		.code	= SW_FRONT_PROXIMITY,
-		.gpio	= S3C64XX_GPN(11),	/* EINT 11 */
-		.type	= EV_SW,
-	},
+static const struct software_node crag6410_gpio_keys_node = {
+	.name = "crag6410-gpio-keys",
 };
 
-static struct gpio_keys_platform_data crag6410_gpio_keydata = {
-	.buttons	= crag6410_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(crag6410_gpio_keys),
+static const struct property_entry crag6410_suspend_key_props[] = {
+	PROPERTY_ENTRY_U32("linux,code", KEY_SUSPEND),
+	PROPERTY_ENTRY_GPIO("gpios",
+			    SAMSUNG_GPIO_NODE('L'), 10,	/* EINT 18 */
+			    GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_BOOL("wakeup-source"),
+	{ }
 };
 
-static struct platform_device crag6410_gpio_keydev = {
-	.name		= "gpio-keys",
-	.id		= 0,
-	.dev.platform_data = &crag6410_gpio_keydata,
+static const struct software_node crag6410_suspend_key_node = {
+	.parent = &crag6410_gpio_keys_node,
+	.properties = crag6410_suspend_key_props,
+};
+
+static const struct property_entry crag6410_prox_sw_props[] = {
+	PROPERTY_ENTRY_U32("linux,input-type", EV_SW),
+	PROPERTY_ENTRY_U32("linux,code", SW_FRONT_PROXIMITY),
+	PROPERTY_ENTRY_GPIO("gpios",
+			    SAMSUNG_GPIO_NODE('N'), 11,	/* EINT 11 */
+			    GPIO_ACTIVE_HIGH),
+	{ }
+};
+
+static const struct software_node crag6410_prox_sw_node = {
+	.parent = &crag6410_gpio_keys_node,
+	.properties = crag6410_prox_sw_props,
 };
 
+static const struct software_node *crag6410_gpio_keys_swnodes[] = {
+	&crag6410_gpio_keys_node,
+	&crag6410_suspend_key_node,
+	&crag6410_prox_sw_node,
+	NULL
+};
+
+static void __init crag6410_setup_gpio_keys(void)
+{
+	struct platform_device_info keys_info = {
+		.name	= "gpio-keys",
+		.id	= 0,
+	};
+	struct platform_device *pd;
+	int err;
+
+	err = software_node_register_node_group(crag6410_gpio_keys_swnodes);
+	if (err) {
+		pr_err("failed to register gpio-keys software nodes: %d\n", err);
+		return;
+	}
+
+	keys_info.fwnode = software_node_fwnode(&crag6410_gpio_keys_node);
+
+	pd = platform_device_register_full(&keys_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("failed to create gpio-keys device: %d\n", err);
+}
+
 static struct resource crag6410_dm9k_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5, 2),
 	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5 + (1 << 8), 2),
@@ -397,7 +434,6 @@ static struct platform_device *crag6410_devs0[] __initdata = {
 	&samsung_device_pwm,
 	&s3c64xx_device_iis0,
 	&s3c64xx_device_iis1,
-	&crag6410_gpio_keydev,
 };
 
 static struct platform_device *crag6410_devs1[] __initdata = {
@@ -909,6 +945,7 @@ static void __init crag6410_machine_init(void)
 
 	gpiod_add_lookup_table(&crag_leds_table);
 	crag6410_setup_keypad();
+	crag6410_setup_gpio_keys();
 
 	platform_add_devices(crag6410_devs1, ARRAY_SIZE(crag6410_devs1));
 	gpio_led_register_device(-1, &gpio_leds_pdata);

-- 
2.55.0.795.g602f6c329a-goog