Re: [PATCH v4 2/2] mailbox: exynos: Add support for Exynos850 mailbox
Peter Griffin <[email protected]> Thu, 23 Jul 2026 13:25:04 +0100
| Newsgroups | org.kernel.vger.linux-samsung-soc,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <CADrjBPqHcXgAC+AdMAKZRa6S6ZOaYKnwhj-K+wXdouuV7oVmkw@mail.gmail.com> |
On Thu, 9 Jul 2026 at 15:45, Alexey Klimov <[email protected]> wrote: > > Exynos850-based platforms support ACPM and has similar workflow > of communicating with ACPM via mailbox, however mailbox controller > registers are located at different offsets and writes/reads could be > different. To distinguish between such different behaviours, > the registers offsets for Exynos850 and the platform-specific data > structs are introduced and configuration is described in such structs > for gs101 and exynos850 based SoCs. Probe routine now selects the > corresponding platform-specific data via device_get_match_data(). > > Reviewed-by: Krzysztof Kozlowski <[email protected]> > Signed-off-by: Alexey Klimov <[email protected]> > --- Reviewed-by: Peter Griffin <[email protected]> > drivers/mailbox/exynos-mailbox.c | 72 ++++++++++++++++++++++++++++++++++++---- > 1 file changed, 66 insertions(+), 6 deletions(-) > > diff --git a/drivers/mailbox/exynos-mailbox.c b/drivers/mailbox/exynos-mailbox.c > index fa02f18948cf..ff75c1c7633c 100644 > --- a/drivers/mailbox/exynos-mailbox.c > +++ b/drivers/mailbox/exynos-mailbox.c > @@ -24,14 +24,60 @@ > > #define EXYNOS_MBOX_CHAN_COUNT HWEIGHT32(EXYNOS_MBOX_INTGR1_MASK) > > +#define EXYNOS850_MBOX_INTGR0 0x8 /* Interrupt Generation Register 0 */ > +#define EXYNOS850_MBOX_INTMR1 0x24 /* Interrupt Mask Register 1 */ > + > +#define EXYNOS850_MBOX_INTMR1_MASK GENMASK(15, 0) > +#define EXYNOS850_MBOX_INTGR0_MASK GENMASK(31, 16) > + > +#define EXYNOS850_MBOX_CHAN_COUNT HWEIGHT32(EXYNOS850_MBOX_INTGR0_MASK) > + > +/** > + * struct exynos_mbox_driver_data - platform-specific mailbox configuration. > + * @intgr: offset to the IRQ generation register, doorbell > + * to APM co-processor. > + * @intgr_shift: shift to apply to the value written to IRQ generation > + * register. > + * @intmr: offset to the IRQ mask register. > + * @intmr_mask: value to write to the mask register to mask out all > + * interrupts. > + * @num_chans: number of channels the mailbox can support (hardware > + * capability). > + */ > +struct exynos_mbox_driver_data { > + u32 intgr; > + u32 intgr_shift; > + u32 intmr; > + u32 intmr_mask; > + int num_chans; > +}; > + > /** > * struct exynos_mbox - driver's private data. > * @regs: mailbox registers base address. > * @mbox: pointer to the mailbox controller. > + * @data: pointer to driver platform-specific data. > */ > struct exynos_mbox { > void __iomem *regs; > struct mbox_controller *mbox; > + const struct exynos_mbox_driver_data *data; > +}; > + > +static const struct exynos_mbox_driver_data exynos850_mbox_data = { > + .intgr = EXYNOS850_MBOX_INTGR0, > + .intgr_shift = 16, > + .intmr = EXYNOS850_MBOX_INTMR1, > + .intmr_mask = EXYNOS850_MBOX_INTMR1_MASK, > + .num_chans = EXYNOS850_MBOX_CHAN_COUNT, > +}; > + > +static const struct exynos_mbox_driver_data exynos_gs101_mbox_data = { > + .intgr = EXYNOS_MBOX_INTGR1, > + .intgr_shift = 0, > + .intmr = EXYNOS_MBOX_INTMR0, > + .intmr_mask = EXYNOS_MBOX_INTMR0_MASK, > + .num_chans = EXYNOS_MBOX_CHAN_COUNT, > }; > > static int exynos_mbox_send_data(struct mbox_chan *chan, void *data) > @@ -50,7 +96,9 @@ static int exynos_mbox_send_data(struct mbox_chan *chan, void *data) > return -EINVAL; > } > > - writel(BIT(msg->chan_id), exynos_mbox->regs + EXYNOS_MBOX_INTGR1); > + /* Ring the doorbell */ > + writel(BIT(msg->chan_id) << exynos_mbox->data->intgr_shift, > + exynos_mbox->regs + exynos_mbox->data->intgr); > > return 0; > } > @@ -80,19 +128,31 @@ static struct mbox_chan *exynos_mbox_of_xlate(struct mbox_controller *mbox, > } > > static const struct of_device_id exynos_mbox_match[] = { > - { .compatible = "google,gs101-mbox" }, > + { > + .compatible = "google,gs101-mbox", > + .data = &exynos_gs101_mbox_data > + }, > + { > + .compatible = "samsung,exynos850-mbox", > + .data = &exynos850_mbox_data > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, exynos_mbox_match); > > static int exynos_mbox_probe(struct platform_device *pdev) > { > + const struct exynos_mbox_driver_data *data; > struct device *dev = &pdev->dev; > struct exynos_mbox *exynos_mbox; > struct mbox_controller *mbox; > struct mbox_chan *chans; > struct clk *pclk; > > + data = device_get_match_data(&pdev->dev); > + if (!data) > + return -ENODEV; > + > exynos_mbox = devm_kzalloc(dev, sizeof(*exynos_mbox), GFP_KERNEL); > if (!exynos_mbox) > return -ENOMEM; > @@ -101,8 +161,7 @@ static int exynos_mbox_probe(struct platform_device *pdev) > if (!mbox) > return -ENOMEM; > > - chans = devm_kcalloc(dev, EXYNOS_MBOX_CHAN_COUNT, sizeof(*chans), > - GFP_KERNEL); > + chans = devm_kcalloc(dev, data->num_chans, sizeof(*chans), GFP_KERNEL); > if (!chans) > return -ENOMEM; > > @@ -115,7 +174,8 @@ static int exynos_mbox_probe(struct platform_device *pdev) > return dev_err_probe(dev, PTR_ERR(pclk), > "Failed to enable clock.\n"); > > - mbox->num_chans = EXYNOS_MBOX_CHAN_COUNT; > + exynos_mbox->data = data; > + mbox->num_chans = data->num_chans; > mbox->chans = chans; > mbox->dev = dev; > mbox->ops = &exynos_mbox_chan_ops; > @@ -126,7 +186,7 @@ static int exynos_mbox_probe(struct platform_device *pdev) > platform_set_drvdata(pdev, exynos_mbox); > > /* Mask out all interrupts. We support just polling channels for now. */ > - writel(EXYNOS_MBOX_INTMR0_MASK, exynos_mbox->regs + EXYNOS_MBOX_INTMR0); > + writel(data->intmr_mask, exynos_mbox->regs + data->intmr); > > return devm_mbox_controller_register(dev, mbox); > } > > -- > 2.51.0 >