[PATCH v2 5/8] arm64: dts: google: Move 'status' to the end to match coding style
Krzysztof Kozlowski <[email protected]> Sat, 01 Aug 2026 17:07:00 +0200
| Newsgroups | org.kernel.vger.linux-samsung-soc,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <20260801-b4-dts-coding-style-strict-v2-5-f09a659ab80d@oss.qualcomm.com> |
'status' property is special, thus DTS coding style expects it to be always the last property preceded with a blank line, as reported by dt-check-style: [required-blank-lines] "status" must be preceded by a blank line [property-order] property 'vcc-supply' out of canonical order (should sort before 'status') Reviewed-by: André Draszik <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> --- arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 2 + .../boot/dts/exynos/google/gs101-pixel-common.dtsi | 12 +++- arch/arm64/boot/dts/exynos/google/gs101-raven.dts | 2 + arch/arm64/boot/dts/exynos/google/gs101.dtsi | 70 ++++++++++++++++++++++ 4 files changed, 85 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts index 36721adcaa23..c5a3958c2320 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts @@ -39,6 +39,7 @@ ldo31m { &cont_splash_mem { reg = <0x0 0xfac00000 (1080 * 2400 * 4)>; + status = "okay"; }; @@ -47,5 +48,6 @@ &framebuffer0 { height = <2400>; stride = <(1080 * 4)>; format = "a8r8g8b8"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi index 5227cd4e314b..a12f2b88d72d 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi @@ -32,6 +32,7 @@ framebuffer0: framebuffer-0 { vci-supply = <&s2mpg10_ldo22m>; vddi-supply = <&s2mpg11_bucka>; /* format properties to be added by actual board */ + status = "disabled"; }; }; @@ -98,6 +99,7 @@ cont_splash_mem: splash@fac00000 { /* size to be updated by actual board */ reg = <0x0 0xfac00000 0x0>; no-map; + status = "disabled"; }; }; @@ -856,8 +858,9 @@ &serial_0 { }; &ufs_0 { - status = "okay"; vcc-supply = <&ufs_0_fixed_vcc_reg>; + + status = "okay"; }; &ufs_0_phy { @@ -867,6 +870,7 @@ &ufs_0_phy { &usbdrd31 { vdd10-supply = <®_placeholder>; vdd33-supply = <®_placeholder>; + status = "okay"; }; @@ -875,6 +879,7 @@ &usbdrd31_dwc3 { usb-role-switch; role-switch-default-mode = "peripheral"; maximum-speed = "super-speed-plus"; + status = "okay"; port { @@ -893,6 +898,7 @@ &usbdrd31_phy { vdd33-usb20-supply = <®_placeholder>; vdda-usbdp-supply = <®_placeholder>; vddh-usbdp-supply = <®_placeholder>; + status = "okay"; port { @@ -904,20 +910,24 @@ usbdrd31_phy_orien_switch: endpoint { &usi_uart { samsung,clkreq-on; /* needed for UART mode */ + status = "okay"; }; &usi8 { samsung,mode = <USI_MODE_I2C>; + status = "okay"; }; &usi12 { samsung,mode = <USI_MODE_I2C>; + status = "okay"; }; &watchdog_cl0 { timeout-sec = <30>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-raven.dts b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts index a422542715f2..7c4273796a22 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-raven.dts +++ b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts @@ -35,6 +35,7 @@ ldo14s { &cont_splash_mem { reg = <0x0 0xfac00000 (1440 * 3120 * 4)>; + status = "okay"; }; @@ -43,5 +44,6 @@ &framebuffer0 { height = <3120>; stride = <(1440 * 4)>; format = "a8r8g8b8"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index 86933f22647b..edc38f2d1183 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -624,6 +624,7 @@ watchdog_cl0: watchdog@10060000 { interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>; samsung,syscon-phandle = <&pmu_system_controller>; samsung,cluster-index = <0>; + status = "disabled"; }; @@ -636,6 +637,7 @@ watchdog_cl1: watchdog@10070000 { interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>; samsung,syscon-phandle = <&pmu_system_controller>; samsung,cluster-index = <1>; + status = "disabled"; }; @@ -707,6 +709,7 @@ usi1: usi@109000c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1000>; + status = "disabled"; hsi2c_1: i2c@10900000 { @@ -721,6 +724,7 @@ hsi2c_1: i2c@10900000 { interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c1_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -734,6 +738,7 @@ serial_1: serial@10900000 { pinctrl-0 = <&uart1_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -748,6 +753,7 @@ spi_1: spi@10900000 { interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi1_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -762,6 +768,7 @@ usi2: usi@109100c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1004>; + status = "disabled"; hsi2c_2: i2c@10910000 { @@ -776,6 +783,7 @@ hsi2c_2: i2c@10910000 { interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c2_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -789,6 +797,7 @@ serial_2: serial@10910000 { pinctrl-0 = <&uart2_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -803,6 +812,7 @@ spi_2: spi@10910000 { interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi2_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -817,6 +827,7 @@ usi3: usi@109200c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1008>; + status = "disabled"; hsi2c_3: i2c@10920000 { @@ -831,6 +842,7 @@ hsi2c_3: i2c@10920000 { interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c3_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -844,6 +856,7 @@ serial_3: serial@10920000 { pinctrl-0 = <&uart3_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -858,6 +871,7 @@ spi_3: spi@10920000 { interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi3_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -872,6 +886,7 @@ usi4: usi@109300c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x100c>; + status = "disabled"; hsi2c_4: i2c@10930000 { @@ -886,6 +901,7 @@ hsi2c_4: i2c@10930000 { interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c4_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -899,6 +915,7 @@ serial_4: serial@10930000 { pinctrl-0 = <&uart4_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -913,6 +930,7 @@ spi_4: spi@10930000 { interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi4_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -927,6 +945,7 @@ usi5: usi@109400c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1010>; + status = "disabled"; hsi2c_5: i2c@10940000 { @@ -941,6 +960,7 @@ hsi2c_5: i2c@10940000 { interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c5_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -954,6 +974,7 @@ serial_5: serial@10940000 { pinctrl-0 = <&uart5_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -968,6 +989,7 @@ spi_5: spi@10940000 { interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi5_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -982,6 +1004,7 @@ usi6: usi@109500c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1014>; + status = "disabled"; hsi2c_6: i2c@10950000 { @@ -996,6 +1019,7 @@ hsi2c_6: i2c@10950000 { interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c6_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1009,6 +1033,7 @@ serial_6: serial@10950000 { pinctrl-0 = <&uart6_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1023,6 +1048,7 @@ spi_6: spi@10950000 { interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi6_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1037,6 +1063,7 @@ usi7: usi@109600c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1018>; + status = "disabled"; hsi2c_7: i2c@10960000 { @@ -1051,6 +1078,7 @@ hsi2c_7: i2c@10960000 { interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c7_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1064,6 +1092,7 @@ serial_7: serial@10960000 { pinctrl-0 = <&uart7_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1078,6 +1107,7 @@ spi_7: spi@10960000 { interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi7_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1092,6 +1122,7 @@ usi8: usi@109700c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x101c>; + status = "disabled"; hsi2c_8: i2c@10970000 { @@ -1106,6 +1137,7 @@ hsi2c_8: i2c@10970000 { interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c8_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1119,6 +1151,7 @@ serial_8: serial@10970000 { pinctrl-0 = <&uart8_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1133,6 +1166,7 @@ spi_8: spi@10970000 { interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi8_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1148,6 +1182,7 @@ usi_uart: usi@10a000c0 { clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1020>; samsung,mode = <USI_MODE_UART>; + status = "disabled"; serial_0: serial@10a00000 { @@ -1160,6 +1195,7 @@ serial_0: serial@10a00000 { pinctrl-0 = <&uart0_bus>; pinctrl-names = "default"; samsung,uart-fifosize = <256>; + status = "disabled"; }; }; @@ -1174,6 +1210,7 @@ usi14: usi@10a200c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1028>; + status = "disabled"; hsi2c_14: i2c@10a20000 { @@ -1188,6 +1225,7 @@ hsi2c_14: i2c@10a20000 { interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c14_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1201,6 +1239,7 @@ serial_14: serial@10a20000 { pinctrl-0 = <&uart14_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1215,6 +1254,7 @@ spi_14: spi@10a20000 { interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi14_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1254,6 +1294,7 @@ usi0: usi@10d100c0 { <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric1 0x1000>; + status = "disabled"; hsi2c_0: i2c@10d10000 { @@ -1268,6 +1309,7 @@ hsi2c_0: i2c@10d10000 { interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c0_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1281,6 +1323,7 @@ serial_usi0: serial@10d10000 { pinctrl-0 = <&uart0_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1295,6 +1338,7 @@ spi_0: spi@10d10000 { interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi0_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1309,6 +1353,7 @@ usi9: usi@10d200c0 { <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric1 0x1004>; + status = "disabled"; hsi2c_9: i2c@10d20000 { @@ -1323,6 +1368,7 @@ hsi2c_9: i2c@10d20000 { interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c9_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1336,6 +1382,7 @@ serial_9: serial@10d20000 { pinctrl-0 = <&uart9_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1350,6 +1397,7 @@ spi_9: spi@10d20000 { interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi9_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1364,6 +1412,7 @@ usi10: usi@10d300c0 { <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric1 0x1008>; + status = "disabled"; hsi2c_10: i2c@10d30000 { @@ -1378,6 +1427,7 @@ hsi2c_10: i2c@10d30000 { interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c10_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1391,6 +1441,7 @@ serial_10: serial@10d30000 { pinctrl-0 = <&uart10_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1405,6 +1456,7 @@ spi_10: spi@10d30000 { interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi10_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1419,6 +1471,7 @@ usi11: usi@10d400c0 { <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric1 0x100c>; + status = "disabled"; hsi2c_11: i2c@10d40000 { @@ -1433,6 +1486,7 @@ hsi2c_11: i2c@10d40000 { interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c11_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1446,6 +1500,7 @@ serial_11: serial@10d40000 { pinctrl-0 = <&uart11_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1460,6 +1515,7 @@ spi_11: spi@10d40000 { interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi11_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1474,6 +1530,7 @@ usi12: usi@10d500c0 { <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric1 0x1010>; + status = "disabled"; hsi2c_12: i2c@10d50000 { @@ -1488,6 +1545,7 @@ hsi2c_12: i2c@10d50000 { interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c12_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1501,6 +1559,7 @@ serial_12: serial@10d50000 { pinctrl-0 = <&uart12_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1515,6 +1574,7 @@ spi_12: spi@10d50000 { interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi12_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1529,6 +1589,7 @@ usi13: usi@10d600c0 { <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric1 0x1014>; + status = "disabled"; hsi2c_13: i2c@10d60000 { @@ -1543,6 +1604,7 @@ hsi2c_13: i2c@10d60000 { interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&hsi2c13_bus>; pinctrl-names = "default"; + status = "disabled"; }; @@ -1556,6 +1618,7 @@ serial_13: serial@10d60000 { pinctrl-0 = <&uart13_bus_single>; pinctrl-names = "default"; samsung,uart-fifosize = <64>; + status = "disabled"; }; @@ -1570,6 +1633,7 @@ spi_13: spi@10d60000 { interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-0 = <&spi13_bus>; pinctrl-names = "default"; + status = "disabled"; }; }; @@ -1609,6 +1673,7 @@ usbdrd31_phy: phy@11100000 { clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk"; #phy-cells = <1>; samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; }; @@ -1622,6 +1687,7 @@ usbdrd31: usb@11110000 { clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk"; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; usbdrd31_dwc3: usb@0 { @@ -1635,6 +1701,7 @@ usbdrd31_dwc3: usb@0 { snps,has-lpm-erratum; snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; + status = "disabled"; }; }; @@ -1698,6 +1765,7 @@ ufs_0: ufs@14700000 { phys = <&ufs_0_phy>; phy-names = "ufs-phy"; samsung,sysreg = <&sysreg_hsi2 0x710>; + status = "disabled"; }; @@ -1709,6 +1777,7 @@ ufs_0_phy: phy@14704000 { #phy-cells = <0>; clocks = <&ext_24_5m>; clock-names = "ref_clk"; + status = "disabled"; }; @@ -1812,6 +1881,7 @@ pinctrl_gsacore: pinctrl@17a80000 { /* TODO: update once support for this CMU exists */ clocks = <0>; clock-names = "pclk"; + status = "disabled"; }; -- 2.53.0