Re:
Thomas Turner <[email protected]>
| Newsgroups | org.kernel.vger.linux-samsung-soc,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Hi Sam and Alexey, On 19/08/2026 20:51, Sam Protsenko wrote: > Can you please tell us a bit about how you tested this patch, and on > which board? As DPU is not currently enabled on Exynos850 SoC, I'm not > sure how exactly GPU can be useful. If you have a use case or a > testing procedure we can run on the E850-96 board, please share. > Sam, Alexey could you please test GPU on the E850-96 board by following these instructions: 1) Apply this patch series locally 2) Change status="disabled"; to status="okay"; 3) Make sure these configs are enabled: CONFIG_DRM_SIMPLEDRM=y CONFIG_DRM_PANFROST=y 4) In terms of regulators we set up a basic mali regulator via our secondary bootloader [1] and configured with this dts setup [2], NOTE you may be able to get away with a dummy regulator so try that first. If not I am sure you can replicate something simple with u-boot PMIC. 5) Boot a GUI, I saw Debian was used for the bring-up, that should work 6) Run the following command: $ dmesg | grep "panfrost" 7) Compare that to the output at [3] I hope these instructions make sense, but feel free to send any queries my way. Best Regards, Tom [1] https://github.com/samsungexynos850/uniLoader/commit/6a2ed2d97aaf1616e581d0979f9e56a046093e15 [2] https://github.com/samsungexynos850/linux/commit/68442271304b7c7a410d85118e85df67bcda108a [3] https://gist.github.com/DaemonMCR/63fa564483202642d6d66e628b8e6c90