[PATCH v5 0/2] Add Hawi UFS PHY and Controller support

From: Palash Kambar <[email protected]>

This series introduces devicetree binding documentation and PHY
initialization support required to enable UFS on this platform.

  1. Devicetree binding documentation for the QMP UFS PHY
     used on Qualcomm Hawi.
  2. Initialization sequence tables and configuration required
     for the QMP UFS PHY on Hawi SoC.

---
changes from V1
1) Addressed Dmitry's comments to fix versioning for PCS and qserdes.
2) Addressed Mani's comments and fixed missed compatible string and
   binding name correction.

changes from V2
1) Addressed Dmitry's comments to remove whitespace and stray line.

changes from V3:
1) Addressed Vinod's comment on missing macros.
2) Binding patch for UFS controller has been merged, so removed here.

changes from V4:
1) Rebased code to tip.

Palash Kambar (2):
  phy: qcom-qmp-ufs: Add UFS PHY support on Hawi
  dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Hawi UFS PHY
    compatible

 .../phy/qcom,sc8280xp-qmp-ufs-phy.yaml        |   2 +
 .../phy/qualcomm/phy-qcom-qmp-pcs-ufs-v7.h    |  24 +++
 .../qualcomm/phy-qcom-qmp-qserdes-com-v8.h    |  13 +-
 .../phy-qcom-qmp-qserdes-txrx-ufs-v8.h        |  37 +++++
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c       | 139 ++++++++++++++++++
 5 files changed, 214 insertions(+), 1 deletion(-)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v7.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v8.h

-- 
2.34.1