[PATCH v4 1/2] ufs: rpmb: retry power-on UNIT ATTENTION on the RPMB WLUN
Jorge Ramirez-Ortiz <[email protected]>
| Newsgroups | org.kernel.vger.linux-scsi,org.kernel.vger.linux-kernel,org.trustedfirmware.lists.op-tee |
|---|---|
| Message-ID | <[email protected]> |
After a power cycle, the first command sent to any UFS logical unit completes with CHECK CONDITION reporting a power-on UNIT ATTENTION. The SCSI core surfaces this condition to the caller rather than retrying it. For the RPMB well-known LU the first command after boot is the first RPMB frame, and RPMB has no earlier, guaranteed access that could clear the condition beforehand. The power-on UNIT ATTENTION therefore reaches RPMB and fails that first frame, breaking RPMB on every cold boot. The RPMB WLUN needs the power-on UNIT ATTENTION to be retried so that RPMB works from the very first access after a power cycle. Signed-off-by: Jorge Ramirez-Ortiz <[email protected]> --- drivers/ufs/core/ufs-rpmb.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/ufs/core/ufs-rpmb.c b/drivers/ufs/core/ufs-rpmb.c index ffad049872b9..79e6cd2b20a0 100644 --- a/drivers/ufs/core/ufs-rpmb.c +++ b/drivers/ufs/core/ufs-rpmb.c @@ -21,6 +21,7 @@ #include <linux/unaligned.h> #include "ufshcd-priv.h" +#define UFS_RPMB_UA_RETRIES 3 /* Retries for the power-on UNIT ATTENTION */ #define UFS_RPMB_SEC_PROTOCOL 0xEC /* JEDEC UFS application */ #define UFS_RPMB_SEC_PROTOCOL_ID 0x01 /* JEDEC UFS RPMB protocol ID, CDB byte3 */ @@ -40,6 +41,22 @@ struct ufs_rpmb_dev { static int ufs_sec_submit(struct ufs_hba *hba, u16 spsp, void *buffer, size_t len, bool send) { struct scsi_device *sdev = hba->ufs_rpmb_wlun; + struct scsi_failure failure_defs[] = { + { + .sense = UNIT_ATTENTION, + .asc = 0x29, /* power on, reset, or bus device reset occurred */ + .ascq = SCMD_FAILURE_ASCQ_ANY, + .allowed = UFS_RPMB_UA_RETRIES, + .result = SAM_STAT_CHECK_CONDITION, + }, + {} + }; + struct scsi_failures failures = { + .failure_definitions = failure_defs, + }; + const struct scsi_exec_args exec_args = { + .failures = &failures, + }; u8 cdb[12] = { }; cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN; @@ -48,7 +65,8 @@ static int ufs_sec_submit(struct ufs_hba *hba, u16 spsp, void *buffer, size_t le put_unaligned_be32(len, &cdb[6]); return scsi_execute_cmd(sdev, cdb, send ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, - buffer, len, /*timeout=*/30 * HZ, 0, NULL); + buffer, len, /*timeout=*/30 * HZ, /*retries=*/0, + &exec_args); } /* UFS RPMB route frames implementation */ -- 2.54.0