[PATCH v2 0/2] serial: 8250: Add AN7581 UART support

This is a new version of [1] to support UART driver for
Airoha SoC.

One additional function was needed serial8250_get_baud_rate()
for the driver to work correctly for baud rate calculation.

While at it also try to clarify a long standing issue with
new UART driver when adding new ids for uart_config[].

[1] https://lore.kernel.org/all/[email protected]/

Changes v2:
- Drop intermediate patch
- Use .set_divisor OPs
- Use div_u64 instead of / 40 for 32 bit overflow
- Drop dedicated match table and use compatible for type

Changes compared to [1]:
- Fix all formal error
- Use better compatible names
- Drop unneeded header
- Drop usage of irq (it's filled by the generic function)
- General code cleanup and reorg
- Split to patch and add the UAPI map patch

Benjamin Larsson (1):
  dt-bindings: serial: 8250: Add Airoha compatibles

Christian Marangi (1):
  serial: 8250: Add Airoha SoC UART and HSUART support

 .../devicetree/bindings/serial/8250.yaml      |   5 +
 drivers/tty/serial/8250/8250.h                |   6 +
 drivers/tty/serial/8250/8250_airoha.c         | 190 ++++++++++++++++++
 drivers/tty/serial/8250/8250_port.c           |  16 ++
 drivers/tty/serial/8250/Kconfig               |  11 +
 drivers/tty/serial/8250/Makefile              |   1 +
 6 files changed, 229 insertions(+)
 create mode 100644 drivers/tty/serial/8250/8250_airoha.c

-- 
2.53.0