[PATCH v1 2/3] serial: tegra-tcu: Make use of dev_err_probe() in .probe()

Uwe Kleine-König <[email protected]>
Newsgroups org.kernel.vger.linux-serial,org.kernel.vger.linux-kernel,org.kernel.vger.linux-tegra
Message-ID <e5a1565edc2b8c0241827f4b9c40c53fca064415.1786547950.git.u.kleine-koenig@baylibre.com>
Usage of dev_err_probe() is (sometimes) a bit more compact than
dev_err(), it properly handles ENOMEM and EPROBE_DEFER and emits the
error code symbolically.

Also introduce a variable to hold &pdev->dev to reduce line length a
bit.

Signed-off-by: Uwe Kleine-König <[email protected]>
---
 drivers/tty/serial/tegra-tcu.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c
index 7033dbfe8ba1..077023ce1842 100644
--- a/drivers/tty/serial/tegra-tcu.c
+++ b/drivers/tty/serial/tegra-tcu.c
@@ -179,9 +179,10 @@ static int tegra_tcu_probe(struct platform_device *pdev)
 {
 	struct uart_port *port;
 	struct tegra_tcu *tcu;
+	struct device *dev = &pdev->dev;
 	int err;
 
-	tcu = devm_kzalloc(&pdev->dev, sizeof(*tcu), GFP_KERNEL);
+	tcu = devm_kzalloc(dev, sizeof(*tcu), GFP_KERNEL);
 	if (!tcu)
 		return -ENOMEM;
 
@@ -190,11 +191,9 @@ static int tegra_tcu_probe(struct platform_device *pdev)
 	tcu->rx_client.rx_callback = tegra_tcu_receive;
 
 	tcu->tx = mbox_request_channel_byname(&tcu->tx_client, "tx");
-	if (IS_ERR(tcu->tx)) {
-		err = PTR_ERR(tcu->tx);
-		dev_err(&pdev->dev, "failed to get tx mailbox: %d\n", err);
-		return err;
-	}
+	if (IS_ERR(tcu->tx))
+		return dev_err_probe(dev, PTR_ERR(tcu->tx),
+				     "failed to get tx mailbox\n");
 
 #if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE)
 	/* setup the console */
@@ -218,15 +217,14 @@ static int tegra_tcu_probe(struct platform_device *pdev)
 
 	err = uart_register_driver(&tcu->driver);
 	if (err) {
-		dev_err(&pdev->dev, "failed to register UART driver: %d\n",
-			err);
+		dev_err_probe(dev, err, "failed to register UART driver\n");
 		goto free_tx;
 	}
 
 	/* setup the port */
 	port = &tcu->port;
 	spin_lock_init(&port->lock);
-	port->dev = &pdev->dev;
+	port->dev = dev;
 	port->type = PORT_TEGRA_TCU;
 	port->ops = &tegra_tcu_uart_ops;
 	port->fifosize = 1;
@@ -236,7 +234,7 @@ static int tegra_tcu_probe(struct platform_device *pdev)
 
 	err = uart_add_one_port(&tcu->driver, port);
 	if (err) {
-		dev_err(&pdev->dev, "failed to add UART port: %d\n", err);
+		dev_err_probe(dev, err, "failed to add UART port\n");
 		goto unregister_uart;
 	}
 
@@ -246,8 +244,8 @@ static int tegra_tcu_probe(struct platform_device *pdev)
 	 */
 	tcu->rx = mbox_request_channel_byname(&tcu->rx_client, "rx");
 	if (IS_ERR(tcu->rx)) {
-		err = PTR_ERR(tcu->rx);
-		dev_err(&pdev->dev, "failed to get rx mailbox: %d\n", err);
+		err = dev_err_probe(dev, PTR_ERR(tcu->rx),
+				    "failed to get rx mailbox\n");
 		goto remove_uart_port;
 	}
 
-- 
2.47.3
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.