[PATCH v2 04/10] sh: replace linux/gpio.h inclusions

From: Arnd Bergmann <[email protected]>

linux/gpio.h should no longer be used, convert these instead to
linux/gpio/legacy.h for the sh boards using the legacy interfaces,
or remove it where it is not needed at all.

Acked-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
---
 arch/sh/boards/board-magicpanelr2.c             | 2 +-
 arch/sh/boards/board-sh7757lcr.c                | 2 +-
 arch/sh/boards/board-urquell.c                  | 2 +-
 arch/sh/boards/mach-ap325rxa/setup.c            | 2 +-
 arch/sh/boards/mach-ecovec24/setup.c            | 2 +-
 arch/sh/boards/mach-highlander/pinmux-r7785rp.c | 2 +-
 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c         | 2 +-
 arch/sh/boards/mach-kfr2r09/setup.c             | 2 +-
 arch/sh/boards/mach-migor/lcd_qvga.c            | 2 +-
 arch/sh/boards/mach-migor/setup.c               | 2 +-
 arch/sh/boards/mach-rsk/devices-rsk7203.c       | 2 +-
 arch/sh/boards/mach-rsk/devices-rsk7269.c       | 1 -
 arch/sh/boards/mach-se/7724/setup.c             | 2 +-
 arch/sh/include/mach-common/mach/magicpanelr2.h | 2 --
 arch/sh/kernel/cpu/sh4a/setup-shx3.c            | 2 +-
 15 files changed, 13 insertions(+), 16 deletions(-)

diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 75de893152af..3f14118a1015 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -10,7 +10,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index bca54e489e11..6d18f59ef261 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -7,7 +7,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/irq.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
index dad2b3b40735..1f73c04d341f 100644
--- a/arch/sh/boards/board-urquell.c
+++ b/arch/sh/boards/board-urquell.c
@@ -14,7 +14,7 @@
 #include <linux/smc91x.h>
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
 #include <linux/sh_intc.h>
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index bb5004a8ac02..17c3f568d92e 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -17,7 +17,7 @@
 #include <linux/clkdev.h>
 #include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index a641e26f8fdf..ca4b4dd1ddef 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -20,7 +20,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_data/sh_mmcif.h>
 #include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/gpio_backlight.h>
 #include <linux/platform_data/tmio.h>
diff --git a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
index 689bd8732d9e..3a1057ee9ace 100644
--- a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
@@ -3,7 +3,7 @@
  * Copyright (C) 2008 Paul Mundt
  */
 #include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <cpu/sh7785.h>
 #include <mach/highlander.h>
 
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
index f6bbac106d13..68716660de34 100644
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <video/sh_mobile_lcdc.h>
 #include <mach/kfr2r09.h>
 #include <cpu/sh7724.h>
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 70236859919d..30dd7dae7906 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -14,7 +14,7 @@
 
 #include <linux/clkdev.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
index 4ebf130510bc..f72934e370fd 100644
--- a/arch/sh/boards/mach-migor/lcd_qvga.c
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <video/sh_mobile_lcdc.h>
 #include <cpu/sh7722.h>
 #include <mach/migor.h>
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 1853e6319a66..b0198e7cb9ab 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -22,7 +22,7 @@
 #include <linux/smc91x.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/gpio/machine.h>
 #include <linux/videodev2.h>
 #include <linux/sh_intc.h>
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index e6b05d4588b7..eb56b57812bd 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -10,7 +10,7 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/input.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/machvec.h>
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7269.c b/arch/sh/boards/mach-rsk/devices-rsk7269.c
index 4b1e386b51dd..54edd9958eca 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7269.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7269.c
@@ -11,7 +11,6 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/smsc911x.h>
-#include <linux/gpio.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index e500feb91053..bed8f44fcecb 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -15,7 +15,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
diff --git a/arch/sh/include/mach-common/mach/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h
index c2d218cea74b..29d86dd21b7b 100644
--- a/arch/sh/include/mach-common/mach/magicpanelr2.h
+++ b/arch/sh/include/mach-common/mach/magicpanelr2.h
@@ -10,8 +10,6 @@
 #ifndef __ASM_SH_MAGICPANELR2_H
 #define __ASM_SH_MAGICPANELR2_H
 
-#include <linux/gpio.h>
-
 #define __IO_PREFIX mpr2
 #include <asm/io_generic.h>
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 7014d6d199b3..60be8dca54f6 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -9,7 +9,7 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/legacy.h>
 #include <linux/sh_timer.h>
 #include <linux/sh_intc.h>
 #include <cpu/shx3.h>
-- 
2.39.5