An unexpected IO-APIC was found. If this kernel release is less ....
Reimund Magon <[email protected]>
| Newsgroups | org.kernel.vger.linux-smp |
|---|---|
| Message-ID | <[email protected]> |
Hello, I'am running SuSE Linux 9.0 on my computer. I recognized a problem when the power management for the display is activated in X-Windows. When the computer is running without supervision it dies after several hours. First I thought the problem was initiated by the ATI Radeon driver (Version 3.2.8), but using the integrated driver in X-Windows the problem occurs also. I found the message about the "IO-APIC" and this is the reason for this mail. Maybe someone can use this information (or is interested). Hardware Gigabyte GA-8IPE1000 pro (Intel 865PE) Pentium 4 FSB800 3Ghz Hercules Radeon 9700 pro AVM ISDN Adapter Creative Audigy If additional information is needed please let me know. Regards Reimund Magon
boot.msg
(text/plain, 27.6 KB)
Inspecting /boot/System.map-2.4.21-144-default Loaded 21335 symbols from /boot/System.map-2.4.21-144-default. Symbols match kernel version 2.4.21. Loaded 143 symbols from 6 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21-144-default ([email protected]) (gcc version 3.3.1 (SuSE Linux)) #1 Fri Nov 14 00:01:36 UTC 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) <4> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) <4> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) <4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) <5>128MB vmalloc/ioremap area available. <5>127MB HIGHMEM available. <5>896MB LOWMEM available. <7>ACPI: have wakeup address 0xc0001000 <4>found SMP MP-table at 000f4b80 <4>hm, page 000f4000 reserved twice. <4>hm, page 000f5000 reserved twice. <4>hm, page 000f0000 reserved twice. <4>hm, page 000f1000 reserved twice. <4>On node 0 totalpages: 262128 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 32752 pages. <6>ACPI: RSDP (v000 GBT ) @ 0x000f67d0 <6>ACPI: RSDT (v001 GBT AWRDACPI 16944.11825) @ 0x3fff3000 <6>ACPI: FADT (v001 GBT AWRDACPI 16944.11825) @ 0x3fff3040 <6>ACPI: MADT (v001 GBT AWRDACPI 16944.11825) @ 0x3fff7200 <6>ACPI: DSDT (v001 GBT AWRDACPI 00000.04096) @ 0x00000000 <6>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <4>Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x0] trigger[0x0] lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) <6>IOAPIC[0]: Assigned apic_id 2 <4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 <6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) <6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) <6>Using ACPI (MADT) for SMP configuration information <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hda8 vga=0x31a hdc=ide-scsi hdclun=0 splash=silent pci=bios acpi=force apic maxcpus=1 <6>ide_setup: hdc=ide-scsi <6>ide_setup: hdclun=0 <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 3014.532 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 6016.20 BogoMIPS <6>Memory: 1032544k/1048512k available (1579k kernel code, 15580k reserved, 605k data, 160k init, 131008k highmem) <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>ENABLING IO-APIC IRQs <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 16. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 00178020 <7>....... : arbitration: 00 <4>An unexpected IO-APIC was found. If this kernel release is less than <4>three months old please report this to [email protected] <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 001 01 0 0 0 0 0 1 1 39 <7> 02 001 01 0 0 0 0 0 1 1 31 <7> 03 001 01 0 0 0 0 0 1 1 41 <7> 04 001 01 0 0 0 0 0 1 1 49 <7> 05 001 01 0 0 0 0 0 1 1 51 <7> 06 001 01 0 0 0 0 0 1 1 59 <7> 07 001 01 0 0 0 0 0 1 1 61 <7> 08 001 01 0 0 0 0 0 1 1 69 <7> 09 001 01 1 1 0 0 0 1 1 71 <7> 0a 001 01 0 0 0 0 0 1 1 79 <7> 0b 001 01 0 0 0 0 0 1 1 81 <7> 0c 001 01 0 0 0 0 0 1 1 89 <7> 0d 001 01 0 0 0 0 0 1 1 91 <7> 0e 001 01 0 0 0 0 0 1 1 99 <7> 0f 001 01 0 0 0 0 0 1 1 A1 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:5 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ11 -> 0:11 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 3014.4130 MHz. <4>..... host bus clock speed is 200.9608 MHz. <4>cpu: 0, clocks: 2009608, slice: 1004804 <4>CPU0<T0:2009600,T1:1004784,D:12,S:1004804,C:2009608> <4>mtrr: v1.40 (20010327) Richard Gooch ([email protected]) <4>mtrr: detected mtrr type: Intel <6>ACPI: Subsystem revision 20030619 <6>PCI: PCI BIOS revision 2.10 entry at 0xfa5e0, last bus=2 <6>Looking for DSDT in initrd ... not found! <7>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:0 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <6>PCI: Probing PCI hardware <7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16) Mode:1 Active:1 <7>00:00:1e[A] -> 2-16 -> IRQ 16 <7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1 Active:1 <7>00:00:1e[B] -> 2-17 -> IRQ 17 <7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18) Mode:1 Active:1 <7>00:00:1e[C] -> 2-18 -> IRQ 18 <7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1 Active:1 <7>00:00:1e[D] -> 2-19 -> IRQ 19 <7>Pin 2-16 already programmed <7>Pin 2-18 already programmed <7>Pin 2-17 already programmed <7>Pin 2-16 already programmed <7>Pin 2-19 already programmed <7>Pin 2-18 already programmed <7>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) Mode:1 Active:1 <7>00:00:1d[D] -> 2-23 -> IRQ 23 <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>Pin 2-18 already programmed <7>Pin 2-18 already programmed <7>Pin 2-18 already programmed <7>Pin 2-18 already programmed <7>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20) Mode:1 Active:1 <7>00:02:08[A] -> 2-20 -> IRQ 20 <7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21) Mode:1 Active:1 <7>00:02:08[B] -> 2-21 -> IRQ 21 <7>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22) Mode:1 Active:1 <7>00:02:08[C] -> 2-22 -> IRQ 22 <7>Pin 2-23 already programmed <7>Pin 2-18 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-16 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-16 already programmed <7>Pin 2-18 already programmed <7>Pin 2-22 already programmed <7>Pin 2-16 already programmed <7>Pin 2-18 already programmed <7>Pin 2-21 already programmed <7>Pin 2-16 already programmed <7>Pin 2-18 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-18 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-16 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-16 already programmed <7>Pin 2-18 already programmed <7>Pin 2-22 already programmed <7>Pin 2-16 already programmed <7>Pin 2-18 already programmed <7>Pin 2-21 already programmed <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) <5>apm: overridden by ACPI. <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 65532 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xe8000000, mapped to 0xf881c000, size 65536k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=50 <6>vesafb: protected mode interface info at c000:573e <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 30981 bytes, found (1280x1024, 15663 bytes, v3). <6>bootsplash: silent jpeg found. <6>bootsplash: silent jpeg found. <4>Console: switching to colour frame buffer device 148x51 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>PIIX-4: IDE controller at PCI slot 00:1f.1 <6>PIIX-4: chipset revision 2 <6>PIIX-4: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: Maxtor 6Y120P0, ATA DISK drive <4>hdb: Maxtor 6Y080P0, ATA DISK drive <4>blk: queue c03bc8e0, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c03bca3c, I/O limit 4095Mb (mask 0xffffffff) <4>hdc: SONY CD-RW CRX175A, ATAPI CD/DVD-ROM drive <4>hdd: AOPEN 16XDVD-ROM/AMH 20020328, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=14946/255/63, UDMA(100) <4>hdb: attached ide-disk driver. <4>hdb: host protected area => 1 <6>hdb: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=9964/255/63, UDMA(100) <6>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 > <6> hdb: hdb1 <6>ide-floppy driver 0.99.newide <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 8192 buckets, 64Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>cryptoapi: loaded <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 289k freed <4>VFS: Mounted root (ext2 filesystem). <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,8)) ... <4>for (ide0(3,8)) <4>reiserfs: replayed 60 transactions in 1 seconds <4>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } <4>hda: drive_cmd: error=0x04 { DriveStatusError } <4>hda: cache flushing failed. disable write back cacheing for journalled file systems <4>hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } <4>hda: drive_cmd: error=0x04 { DriveStatusError } <4>hda: cache flushing failed. disable write back cacheing for journalled file systems <4>Using r5 hash to sort names <4>VFS: Mounted root (reiserfs filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 160k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <4>reiserfs: enabling write barrier flush mode <6>lvm-mp: allocating 42 lowmem entries at c283d000 <6>LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded <4>reiserfs: enabling write barrier flush mode <6>Adding Swap: 1052216k swap-space (priority 42) <4>reiserfs: enabling write barrier flush mode <4>reiserfs: enabling write barrier flush mode <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,14)) ... <4>for (ide0(3,14)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,13)) ... <4>for (ide0(3,13)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,12)) ... <4>for (ide0(3,12)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,10)) ... <4>for (ide0(3,10)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,11)) ... <4>for (ide0(3,11)) <4>Using r5 hash to sort names <4>hdd: attached ide-cdrom driver. <6>hdd: ATAPI 48X DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <6>SCSI subsystem driver Revision: 1.00 <4>hdc: attached ide-scsi driver. <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: SONY Model: CD-RW CRX175A Rev: 1.0h <4> Type: CD-ROM ANSI SCSI revision: 02 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Mon Dec 22 11:39:19 2003 <notice>run boot scripts (setserial boot.proc) Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports done<notice>exit status of (setserial boot.proc) is (0 0) <notice>run boot scripts (boot.md) <notice>exit status of (boot.md) is (0) <notice>run boot scripts (boot.lvm) Run file system check on root for LVM activation fsck 1.34 (25-Jul-2003) Reiserfs super block in block 16 on 0x308 of format 3.6 with standard journal Blocks (total/free): 263056/207900 by 4096 bytes Filesystem is NOT clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done <notice>exit status of (boot.lvm) is (0) <notice>run boot scripts (boot.localfs) Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.34 (25-Jul-2003) Reiserfs super block in block 16 on 0x308 of format 3.6 with standard journal Blocks (total/free): 263056/207900 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished /dev/hda7 was not cleanly unmounted, check forced. ^A/dev/hda7: |========== | 17.5% ^B^A/dev/hda7: |========================================================| 100.0% ^B^A ^B/dev/hda7: 40/8032 files (0.0% non-contiguous), 5401/32096 blocks Reiserfs super block in block 16 on 0x30e of format 3.6 with standard journal Blocks (total/free): 6482219/6473810 by 4096 bytes Filesystem is NOT clean Replaying journal.. 0 transactions replayed Checking internal tree..finished Reiserfs super block in block 16 on 0x30d of format 3.6 with standard journal Blocks (total/free): 1311296/1290437 by 4096 bytes Filesystem is NOT clean Replaying journal.. 0 transactions replayed Checking internal tree..finished Reiserfs super block in block 16 on 0x30c of format 3.6 with standard journal Blocks (total/free): 1311296/1184994 by 4096 bytes Filesystem is NOT clean Replaying journal.. 0 transactions replayed Checking internal tree..finished Reiserfs super block in block 16 on 0x30a of format 3.6 with standard journal Blocks (total/free): 1311296/1002451 by 4096 bytes Filesystem is NOT clean Replaying journal.. 0 transactions replayed Checking internal tree..finished Reiserfs super block in block 16 on 0x30b of format 3.6 with standard journal Blocks (total/free): 263056/209175 by 4096 bytes Filesystem is NOT clean Replaying journal.. 0 transactions replayed Checking internal tree..finished doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda7 on /boot type ext2 (rw) /dev/hda14 on /daten type reiserfs (rw) /dev/hda13 on /home type reiserfs (rw) /dev/hda12 on /opt type reiserfs (rw) /dev/hda10 on /usr type reiserfs (rw) /dev/hda11 on /var type reiserfs (rw) done<notice>exit status of (boot.localfs) is (0) <notice>run boot scripts (boot.crypto) <notice>exit status of (boot.crypto) is (0) <notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shmdone Restore device permissionsdone Loading required kernel modules doneSetting up the CMOS clock<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0) <notice>run boot scripts (boot.idedma boot.clock) done <notice>exit status of (boot.idedma boot.clock) is (0 0) <notice>run boot scripts (boot.ldconfig) Setting up timezone datadone <notice>exit status of (boot.ldconfig) is (0) <notice>run boot scripts (boot.sched boot.localnet boot.isapnp) Setting scheduling timeslices unused Setting up hostname 'linux'done Setting up loopback interface done <notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0) <notice>run boot scripts (boot.klog boot.ipconfig) Enabling syn flood protectiondone Disabling IP forwardingdone Creating /var/log/boot.msg done<notice>killproc: kill(27,29) System Boot Control: The system has been setup Skipped features: boot.sched System Boot Control: Running /etc/init.d/boot.local done<notice>exit status of (boot.klog boot.ipconfig) is (0 0) <notice>killproc: kill(27,3) Boot logging started on /dev/tty1(/dev/console) at Mon Dec 22 10:39:38 2003 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>start services (random isdn SuSEfirewall2_init) Initializing random number generatordone Setting up ISDN card contr0 AVM FRITZ!Card PCI v2.0done Loading Driver contr0 1 kcapi capi capidrvdone Initializing capi for contr0 (1)done Starting Firewall Initialization (phase 1 of 3) done <notice>exit status of (random isdn SuSEfirewall2_init) is (0 0 0) <notice>start services (network) Setting up network interfaces: lo done eth0 IP/Netmask: 10.0.0.1 / 255.255.255.0 done ippp0 <notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console maxcpus=1 SHELL=/bin/sh TERM=linux progress=19 INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=148 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/etc/sysconfig/network PREVLEVEL=N LINES=51 SHLVL=4 HOME=/ sscripts=41 splash=silent _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] done <notice>exit status of (network) is (0) Starting syslog services<notice>start services (syslog) <notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/klogd ] done <notice>exit status of (syslog) is (0) <notice>start services (hotplug) Starting hotplugging services [ ieee1394 net pci usb ...... ]done <notice>exit status of (hotplug) is (0) <notice>start services (resmgr) Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done <notice>exit status of (resmgr) is (0) <notice>start services (splash_early smbfs portmap SuSEfirewall2_setup) <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=23 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/sbin/portmap ] Mount SMB File System unused Starting RPC portmap daemondone Starting Firewall Initialization (phase 2 of 3) done <notice>exit status of (splash_early smbfs portmap SuSEfirewall2_setup) is (0 6 0 0) <notice>start services (SuSEfirewall2_final) Starting Firewall Initialization (phase 3 of 3) done <notice>exit status of (SuSEfirewall2_final) is (0) <notice>start services (sshd smpppd fbset alsasound acpid) Starting SMPPPDdone <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting SSH daemondone <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/acpid ] Loading ACPI modules (ac battery button fan processor thermal ) done Starting acpid done Starting sound driver: emu10k1done Restoring the previous sound settingdone <notice>exit status of (sshd smpppd fbset alsasound acpid) is (0 0 0 0 0) <notice>start services (splash postfix kbd cups) <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting cupsddone Loading keymap qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.adddone Stop Unicode mode doneLoading console font lat9w-16.psfu -m trivial (B doneStarting mail service (Postfix)done <notice>exit status of (splash postfix kbd cups) is (0 0 0 0) <notice>start services (nscd hwscan cron) <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=41 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting CRON daemondone Starting Name Service Cache Daemondone <notice>exit status of (nscd hwscan cron) is (0 0 0) <notice>start services (xdm splash_late) Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= maxcpus=1 CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=40 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE@euro PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE@euro splash=silent sscripts=41 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done <notice>exit status of (xdm splash_late) is (0 0) Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: smbfs <notice>killproc: kill(669,3)
cpuinfo
(text/plain, 424 B)
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 9 cpu MHz : 3014.532 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 6016.20
pci
(text/plain, 3.9 KB)
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 2).
Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller (rev 2).
Master Capable. Latency=64. Min Gnt=12.
Bus 0, device 29, function 0:
USB Controller: Intel Corp. 82801EB USB Universal Host Controller (rev 2).
IRQ 16.
I/O at 0xcc00 [0xcc1f].
Bus 0, device 29, function 1:
USB Controller: Intel Corp. 82801EB USB Universal Host Controller (rev 2).
IRQ 19.
I/O at 0xc000 [0xc01f].
Bus 0, device 29, function 2:
USB Controller: Intel Corp. 82801EB USB Universal Host Controller (rev 2).
IRQ 18.
I/O at 0xc400 [0xc41f].
Bus 0, device 29, function 3:
USB Controller: Intel Corp. 82801EB USB Universal Host Controller (rev 2).
IRQ 16.
I/O at 0xc800 [0xc81f].
Bus 0, device 29, function 7:
USB Controller: Intel Corp. 82801EB USB2 Enhanced Host Controller (rev 2).
IRQ 23.
Non-prefetchable 32 bit memory at 0xfa100000 [0xfa1003ff].
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 194).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 2).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 2).
IRQ 18.
I/O at 0xf000 [0xf00f].
Non-prefetchable 32 bit memory at 0x40000000 [0x400003ff].
Bus 0, device 31, function 3:
SMBus: Intel Corp. 82801EB SMBus Controller (rev 2).
IRQ 17.
I/O at 0x1400 [0x141f].
Bus 1, device 0, function 0:
VGA compatible controller: PCI device 1002:4e44 (ATI Technologies Inc) (rev 0).
IRQ 16.
Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
I/O at 0xa000 [0xa0ff].
Non-prefetchable 32 bit memory at 0xf9000000 [0xf900ffff].
Bus 1, device 0, function 1:
Display controller: PCI device 1002:4e64 (ATI Technologies Inc) (rev 0).
Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
Non-prefetchable 32 bit memory at 0xf9010000 [0xf901ffff].
Bus 2, device 2, function 0:
Multimedia audio controller: Creative Labs SB Audigy (rev 3).
IRQ 22.
Master Capable. Latency=32. Min Gnt=2.Max Lat=20.
I/O at 0xb000 [0xb01f].
Bus 2, device 2, function 1:
Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 3).
Master Capable. Latency=32.
I/O at 0xb400 [0xb407].
Bus 2, device 2, function 2:
FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 0).
IRQ 16.
Master Capable. Latency=32. Min Gnt=2.Max Lat=4.
Non-prefetchable 32 bit memory at 0xfa00a000 [0xfa00a7ff].
Non-prefetchable 32 bit memory at 0xfa000000 [0xfa003fff].
Bus 2, device 4, function 0:
Network controller: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 1).
IRQ 18.
Non-prefetchable 32 bit memory at 0xfa008000 [0xfa00801f].
I/O at 0xb800 [0xb81f].
Bus 2, device 5, function 0:
FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (rev 0).
IRQ 21.
Master Capable. Latency=32. Min Gnt=2.Max Lat=4.
Non-prefetchable 32 bit memory at 0xfa009000 [0xfa0097ff].
Non-prefetchable 32 bit memory at 0xfa004000 [0xfa007fff].
Bus 2, device 8, function 0:
Ethernet controller: PCI device 8086:1050 (Intel Corp.) (rev 2).
IRQ 20.
Master Capable. Latency=32. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xfa00b000 [0xfa00bfff].
I/O at 0xbc00 [0xbc3f].