<4>An unexpected IO-APIC was found.
[email protected] (Thomas Paetzold)
| Newsgroups | org.kernel.vger.linux-smp |
|---|---|
| Message-ID | <[email protected]> |
Hi there, I just got this message while bootup "An unexpected IO-APIC was found." If you need more info - please let me know what exaktly. Cheers, Tom
siga.txt
(text/plain, 66.8 KB)
1. Hardware ------------------------------------------------------------------------------- 1.1 procinfo - /usr/bin/procinfo Linux 2.4.21-192-smp4G ([email protected]) (gcc 3.3.1 ) #1 2CPU [horizon.] Memory: Total Used Free Shared Buffers Cached Mem: 1031496 252904 778592 0 22980 84948 Swap: 1052216 0 1052216 Bootup: Mon Mar 1 19:05:26 2004 Load average: 0.61 0.22 0.09 1/92 2921 user : 0:03:02.60 5.9% page in : 102297 disk 1: 7029r 2741w nice : 0:00:00.00 0.0% page out: 30556 disk 2: 49r 72w system: 0:03:13.39 6.3% swap in : 1 idle : 8:25:45.43 991.7% swap out: 0 uptime: 0:25:36.06 context : 138425 irq 0: 1536071 timer irq 14: 10151 ide0 irq 1: 141 keyboard irq 15: 1456 ide1 irq 2: 0 cascade [4] irq 16: 90602 usb-uhci, usb-uhci, irq 3: 3 irq 17: 152 Intel ICH5 irq 4: 6 irq 18: 0 usb-uhci irq 6: 2 irq 19: 27 usb-uhci irq 7: 2 irq 20: 28 fcpci, ohci1394 irq 8: 2 rtc irq 22: 1999 SysKonnect SK-98xx irq 9: 0 acpi irq 23: 0 ehci_hcd irq 12: 2814 PS/2 Mouse ------------------------------------------------------------------------------- 1.2 cmdline - /proc/cmdline root=/dev/hda2 vga=0x31a desktop hdd=ide-scsi hddlun=0 splash=silent ------------------------------------------------------------------------------- 1.3 Hardisk ------------------------------------------------------------------------------- 1.3 partitions - /sbin/fdisk -l Platte /dev/hda: 60.0 GByte, 60040544256 Byte 255 Köpfe, 63 Sektoren/Spuren, 7299 Zylinder Einheiten = Zylinder von 16065 * 512 = 8225280 Bytes Gerät boot. Anfang Ende Blöcke Id Dateisystemtyp /dev/hda1 1 131 1052226 82 Linux Swap /dev/hda2 * 132 7299 57576960 83 Linux Platte /dev/hdb: 160.0 GByte, 160041885696 Byte 255 Köpfe, 63 Sektoren/Spuren, 19457 Zylinder Einheiten = Zylinder von 16065 * 512 = 8225280 Bytes Gerät boot. Anfang Ende Blöcke Id Dateisystemtyp /dev/hdb1 1 19456 156280288+ 83 Linux ------------------------------------------------------------------------------- 1.4 Mountpoints - /bin/mount /dev/hda2 on / type ext3 (rw) proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdb1 on /fs-global type ext3 (rw) tmpfs on /dev/shm type tmpfs (rw) capifs on /dev/capi type capifs (rw,mode=0666) usbdevfs on /proc/bus/usb type usbdevfs (rw) ------------------------------------------------------------------------------- 1.5 boot_dir - /bin/ls -la /boot insgesamt 3920 drwxr-xr-x 3 root root 4096 2004-03-01 18:40 . drwxr-xr-x 23 root root 4096 2004-03-01 18:45 .. -rw------- 1 root root 1044 2004-03-01 16:53 .avcrc -rw-r--r-- 1 root root 512 2004-02-29 20:58 backup_mbr lrwxrwxrwx 1 root root 1 2004-02-29 20:43 boot -> . -rw-r--r-- 1 root root 51513 2004-02-18 20:26 config-2.4.21-192-smp4G drwxr-xr-x 2 root root 4096 2004-03-01 16:53 grub lrwxrwxrwx 1 root root 23 2004-03-01 18:40 initrd -> initrd-2.4.21-192-smp4G -rw-r--r-- 1 root root 269176 2004-03-01 18:40 initrd-2.4.21-192-smp4G -rw-r--r-- 1 root root 139044 2004-02-18 20:27 Kerntypes-2.4.21-192-smp4G -rw-r--r-- 1 root root 64824 2003-09-24 01:45 message -rw-r--r-- 1 root root 642017 2004-02-18 20:34 System.map-2.4.21-192-smp4G -rw-r--r-- 1 root root 1509014 2004-02-18 21:28 vmlinux-2.4.21-192-smp4G.gz lrwxrwxrwx 1 root root 24 2004-03-01 18:40 vmlinuz -> vmlinuz-2.4.21-192-smp4G -rw-r--r-- 1 root root 1277987 2004-02-18 20:34 vmlinuz-2.4.21-192-smp4G ------------------------------------------------------------------------------- 1.6 Kernel - /etc/sysconfig/kernel INITRD_MODULES="jbd ext3" MODULES_LOADED_ON_BOOT=" cdrom ide-cd ide-scsi" ACPI_DSDT="" SHMFS_SIZE="" SCHED_MINTIMESLICE="" SCHED_MAXTIMESLICE="" ------------------------------------------------------------------------------- 1.7 fstab - /etc/fstab /dev/hda2 / ext3 defaults 1 1 /dev/hda1 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrecorder /media/cdrecorder auto unhide,ro,noauto,user,exec 0 0 /dev/cdrom /media/cdrom auto unhide,ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto unhide,ro,noauto,user,exec 0 0 /dev/dvdrecorder /media/dvdrecorder auto unhide,ro,noauto,user,exec 0 0 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 /dev/hdb1 /fs-global ext3 defaults 1 2 ------------------------------------------------------------------------------- 1.8 boot.msg - /var/log/boot.msg Inspecting /boot/System.map-2.4.21-192-smp4G Loaded 21749 symbols from /boot/System.map-2.4.21-192-smp4G. Symbols match kernel version 2.4.21. Loaded 186 symbols from 7 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21-192-smp4G ([email protected]) (gcc version 3.3.1 (SuSE Linux)) #1 SMP Wed Feb 18 19:27:48 UTC 2004 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) <4> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) <4> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) <4> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) <4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) <5>128MB vmalloc/ioremap area available. <5>127MB HIGHMEM available. <5>896MB LOWMEM available. <7>ACPI: have wakeup address 0xc0002000 <4>found SMP MP-table at 000ff780 <4>hm, page 000ff000 reserved twice. <4>hm, page 00100000 reserved twice. <4>hm, page 000f1000 reserved twice. <4>hm, page 000f2000 reserved twice. <4>On node 0 totalpages: 261936 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 32560 pages. <6>ACPI: RSDP (v000 ACPIAM ) @ 0x000f9e30 <6>ACPI: RSDT (v001 A M I OEMRSDT 04352.00774) @ 0x3ff30000 <6>ACPI: FADT (v002 A M I OEMFACP 04352.00774) @ 0x3ff30200 <6>ACPI: MADT (v001 A M I OEMAPIC 04352.00774) @ 0x3ff30390 <6>ACPI: OEMB (v001 A M I OEMBIOS 04352.00774) @ 0x3ff40040 <6>ACPI: DSDT (v001 P4P81 P4P81088 00000.00136) @ 0x00000000 <6>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) <4>Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) <6>IOAPIC[0]: Assigned apic_id 2 <4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 <6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) <6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) <6>Using ACPI (MADT) for SMP configuration information <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hda2 vga=0x31a desktop hdd=ide-scsi hddlun=0 splash=silent <6>ide_setup: hdd=ide-scsi <6>ide_setup: hddlun=0 <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 2998.818 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 5931.00 BogoMIPS <6>Memory: 1022724k/1047744k available (1868k kernel code, 16312k reserved, 638k data, 188k init, 130240k highmem) <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch ([email protected]) <4>mtrr: detected mtrr type: Intel <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 <4>per-CPU timeslice cutoff: 1462.98 usecs. <4>task migration cache decay timeout: 2 msecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 5980.16 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 <6>Total of 2 processors activated (11911.16 BogoMIPS). <4>cpu_sibling_map[0] = 1 <4>cpu_sibling_map[1] = 0 <4>ENABLING IO-APIC IRQs <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 16. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 00178020 <7>....... : arbitration: 00 <4>An unexpected IO-APIC was found. If this kernel release is less than <4>three months old please report this to [email protected] <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 003 03 0 0 0 0 0 1 1 39 <7> 02 003 03 0 0 0 0 0 1 1 31 <7> 03 003 03 0 0 0 0 0 1 1 41 <7> 04 003 03 0 0 0 0 0 1 1 49 <7> 05 003 03 0 0 0 0 0 1 1 51 <7> 06 003 03 0 0 0 0 0 1 1 59 <7> 07 003 03 0 0 0 0 0 1 1 61 <7> 08 003 03 0 0 0 0 0 1 1 69 <7> 09 003 03 1 1 0 0 0 1 1 71 <7> 0a 003 03 0 0 0 0 0 1 1 79 <7> 0b 003 03 0 0 0 0 0 1 1 81 <7> 0c 003 03 0 0 0 0 0 1 1 89 <7> 0d 003 03 0 0 0 0 0 1 1 91 <7> 0e 003 03 0 0 0 0 0 1 1 99 <7> 0f 003 03 0 0 0 0 0 1 1 A1 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:5 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ11 -> 0:11 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 2998.0158 MHz. <4>..... host bus clock speed is 199.0876 MHz. <4>cpu: 0, clocks: 199876, slice: 66625 <4>CPU0<T0:199872,T1:133216,D:31,S:66625,C:199876> <4>cpu: 1, clocks: 199876, slice: 66625 <4>CPU1<T0:199872,T1:66608,D:14,S:66625,C:199876> <4>checking TSC synchronization across CPUs: passed. <4>migration_task 0 on cpu=0 <4>migration_task 1 on cpu=1 <6>ACPI: Subsystem revision 20030619 <6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 <6>PCI: Using configuration type 1 <6>Looking for DSDT in initrd ... not found! <7>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:0 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) <6>PCI: Probing PCI hardware <7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18) Mode:1 Active:1 <7>00:00:1f[A] -> 2-18 -> IRQ 18 <7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1 Active:1 <7>00:00:1f[B] -> 2-17 -> IRQ 17 <7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16) Mode:1 Active:1 <7>00:00:1d[A] -> 2-16 -> IRQ 16 <7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1 Active:1 <7>00:00:1d[B] -> 2-19 -> IRQ 19 <7>Pin 2-18 already programmed <7>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) Mode:1 Active:1 <7>00:00:1d[D] -> 2-23 -> IRQ 23 <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20) Mode:1 Active:1 <7>00:02:08[A] -> 2-20 -> IRQ 20 <7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21) Mode:1 Active:1 <7>00:02:09[A] -> 2-21 -> IRQ 21 <7>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22) Mode:1 Active:1 <7>00:02:09[B] -> 2-22 -> IRQ 22 <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-22 already programmed <7>Pin 2-20 already programmed <7>Pin 2-23 already programmed <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <5>apm: disabled - APM is not SMP safe. <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 65484 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xe8000000, mapped to 0xf881b000, size 65536k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1 <6>vesafb: protected mode interface info at c000:e800 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 30981 bytes, found (1280x1024, 15663 bytes, v3). <6>bootsplash: silent jpeg found. <6>bootsplash: silent jpeg found. <4>Console: switching to colour frame buffer device 148x51 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>PIIX-4: IDE controller at PCI slot 00:1f.1 <4>PCI: Enabling device 00:1f.1 (0005 -> 0007) <6>PIIX-4: chipset revision 2 <6>PIIX-4: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: MAXTOR 4K060H3, ATA DISK drive <4>hdb: ST3160021A, ATA DISK drive <4>blk: queue c046ad40, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c046aea4, I/O limit 4095Mb (mask 0xffffffff) <4>hdc: ATAPI DVD-ROM 16X Maximum, ATAPI CD/DVD-ROM drive <4>hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 117266688 sectors (60041 MB) w/2000KiB Cache, CHS=7299/255/63, UDMA(100) <4>hdb: attached ide-disk driver. <4>hdb: host protected area => 1 <6>hdb: 312581808 sectors (160042 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100) <6>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 <6> hdb: hdb1 <6>ide-floppy driver 0.99.newide <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 8192 buckets, 64Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>cryptoapi: loaded <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 262k freed <4>VFS: Mounted root (ext2 filesystem). <6>Journalled Block Device driver loaded <6>EXT3-fs: INFO: recovery required on readonly filesystem. <6>EXT3-fs: write access will be enabled during recovery. <7>(recovery.c, 256): journal_recover_Rsmp_71301b23: JBD: recovery, exit status 0, recovered transactions 12349 to 12367 <7>(recovery.c, 258): journal_recover_Rsmp_71301b23: JBD: Replayed 1965 and revoked 2/41 blocks <6>kjournald starting. Commit interval 5 seconds <6>EXT3-fs: ide0(3,2): orphan cleanup on readonly fs <7>ext3_orphan_cleanup: deleting unreferenced inode 3982488 <7>ext3_orphan_cleanup: deleting unreferenced inode 3982487 <7>ext3_orphan_cleanup: deleting unreferenced inode 3982486 <7>ext3_orphan_cleanup: deleting unreferenced inode 4112698 <7>ext3_orphan_cleanup: deleting unreferenced inode 4112697 <7>ext3_orphan_cleanup: deleting unreferenced inode 4112696 <6>EXT3-fs: ide0(3,2): 6 orphan inodes deleted <6>EXT3-fs: recovery complete. <6>EXT3-fs: mounted filesystem with ordered data mode. <4>VFS: Mounted root (ext3 filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 188k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal <6>lvm-mp: allocating 42 lowmem entries at c3361000 <6>LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded <6>Adding Swap: 1052216k swap-space (priority 42) <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>hdc: attached ide-cdrom driver. <6>hdc: ATAPI 48X DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <6>SCSI subsystem driver Revision: 1.00 <4>hdd: attached ide-scsi driver. <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: _NEC Model: DVD_RW ND-1300A Rev: 1.05 <4> Type: CD-ROM ANSI SCSI revision: 02 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Mon Mar 1 20:05:38 2004 <notice>run boot scripts (setserial boot.proc) Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports done<notice>exit status of (setserial boot.proc) is (0 0) <notice>run boot scripts (boot.md) <notice>exit status of (boot.md) is (0) <notice>run boot scripts (boot.lvm) Run file system check on root for LVM activation fsck 1.34 (25-Jul-2003) /dev/hda2: clean, 149026/7208960 files, 2623002/14394240 blocks doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done <notice>exit status of (boot.lvm) is (0) <notice>run boot scripts (boot.localfs) Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.34 (25-Jul-2003) /dev/hda2: clean, 149026/7208960 files, 2623002/14394240 blocks /dev/hdb1: recovering journal /dev/hdb1: clean, 6180/19546112 files, 10506671/39070072 blocks doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdb1 on /fs-global type ext3 (rw) done<notice>exit status of (boot.localfs) is (0) <notice>run boot scripts (boot.crypto) <notice>exit status of (boot.crypto) is (0) <notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shmdone Restore device permissionsdone Loading required kernel modules done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0) <notice>run boot scripts (boot.idedma boot.clock) Setting up the CMOS clockdone <notice>exit status of (boot.idedma boot.clock) is (0 0) <notice>run boot scripts (boot.ldconfig) Setting up timezone datadone <notice>exit status of (boot.ldconfig) is (0) <notice>run boot scripts (boot.sched boot.localnet boot.isapnp) Setting scheduling timeslices unused Setting up hostname 'horizon'done Setting up loopback interface done <notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0) <notice>run boot scripts (boot.klog boot.ipconfig) Enabling syn flood protectiondone Disabling IP forwardingdone Creating /var/log/boot.msg done<notice>killproc: kill(31,29) <notice>exit status of (boot.klog boot.ipconfig) is (0 0) System Boot Control: The system has been setup Skipped features: boot.sched System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(31,3) Boot logging started on /dev/tty1(/dev/console) at Mon Mar 1 19:05:50 2004 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>start services (random isdn) Initializing random number generatordone Setting up ISDN card contr0 AVM FRITZ!Card PCIdone Loading Driver contr0 1 kcapi capi capidrvdone Initializing capi for contr0 (1)done <notice>exit status of (random isdn) is (0 0) <notice>start services (network) Setting up network interfaces: lo done eth0 IP/Netmask: 192.168.168.254 / 255.255.255.0 done <notice>exit status of (network) is (0) <notice>start services (syslog) Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/klogd ] done <notice>exit status of (syslog) is (0) <notice>start services (hotplug) Starting hotplugging services [ ieee1394 net pci usb .... ]done <notice>exit status of (hotplug) is (0) <notice>start services (resmgr) Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done <notice>exit status of (resmgr) is (0) <notice>start services (vmware splash_early portmap nmb) <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone <notice>startproc: execve (/usr/lib/samba/classic/nmbd) [ /usr/lib/samba/classic/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/nmbd ] Starting Samba classic NMB daemon done Starting VMware services: Virtual machine monitor done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done Host-only networking on /dev/vmnet8 (background) done NAT networking on /dev/vmnet8 done <notice>exit status of (vmware splash_early portmap nmb) is (0 0 0 0) <notice>start services (smbfs) Mount SMB File System unused <notice>exit status of (smbfs) is (6) <notice>start services (sshd named fbset amavis alsasound acpid) <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting SSH daemondone <notice>startproc: execve (/usr/sbin/amavisd) [ /usr/sbin/amavisd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/amavisd ] Starting virus-scanner (amavisd-new):failed <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/acpid ] Loading ACPI modules (ac battery button fan processor thermal ) done Starting acpid done <notice>startproc: execve (/usr/sbin/named) [ /usr/sbin/named -t /var/lib/named -u named ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/sbin:/usr/sbin:/bin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/named ] Starting name server BIND 9 - Warning: /var/lib/named/var/run/named/named.pid exists! done Starting sound driver: intel8x0done Restoring the previous sound settingdone <notice>exit status of (sshd named fbset amavis alsasound acpid) is (0 0 0 7 0 0) <notice>start services (splash kbd cups) <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting cupsddone Loading keymap qwertz/de-latin1-nodeadkeys.map.gz done^GLoading compose table latin1.adddone Stop Unicode mode doneLoading console font lat9w-16.psfu -m trivial (B done<notice>exit status of (splash kbd cups) is (0 0 0) <notice>start services (xinetd smb postfix hwscan) Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=36 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ] Starting INET services. (xinetd)done Starting mail service (Postfix)done Samba SMB: Waiting for cupsd to get ready(29s) (28s) (27s) (26s) (25s) (24s) (23s) (22s) <notice>startproc: execve (/usr/lib/samba/classic/smbd) [ /usr/lib/samba/classic/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp progress=36 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/smbd ] (21s) (20s) (19s) (18s) done Starting Samba classic SMB daemon done <notice>exit status of (xinetd smb postfix hwscan) is (0 0 0 0) <notice>start services (xdm) Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=40 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE@euro PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE@euro splash=silent sscripts=44 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Pid_file "/var/spool/amavis/amavisd.pid" already exists. Overwriting! done <notice>exit status of (xdm) is (0) <notice>start services (apache) Starting httpd [ ]<notice>startproc: execve (/usr/sbin/httpd) [ /usr/sbin/httpd -f /etc/httpd/httpd.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 LD_LIBRARY_PATH=:/lib INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 DBROOT=/dev/null HOME=/ SHLVL=2 splash=silent sscripts=44 ORACLE_HOME= _=/sbin/startproc DAEMON=/usr/sbin/httpd ] done <notice>exit status of (apache) is (0) <notice>start services (nscd cron) <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cron ] <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting CRON daemondone Starting Name Service Cache Daemondone <notice>exit status of (nscd cron) is (0 0) <notice>start services (splash_late) <notice>exit status of (splash_late) is (0) Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: amavis Skipped services in runlevel 5: smbfs <notice>killproc: kill(663,3) dmesg - /var/log/boot.msg Inspecting /boot/System.map-2.4.21-192-smp4G Loaded 21749 symbols from /boot/System.map-2.4.21-192-smp4G. Symbols match kernel version 2.4.21. Loaded 186 symbols from 7 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21-192-smp4G ([email protected]) (gcc version 3.3.1 (SuSE Linux)) #1 SMP Wed Feb 18 19:27:48 UTC 2004 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) <4> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) <4> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) <4> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) <4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) <5>128MB vmalloc/ioremap area available. <5>127MB HIGHMEM available. <5>896MB LOWMEM available. <7>ACPI: have wakeup address 0xc0002000 <4>found SMP MP-table at 000ff780 <4>hm, page 000ff000 reserved twice. <4>hm, page 00100000 reserved twice. <4>hm, page 000f1000 reserved twice. <4>hm, page 000f2000 reserved twice. <4>On node 0 totalpages: 261936 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 32560 pages. <6>ACPI: RSDP (v000 ACPIAM ) @ 0x000f9e30 <6>ACPI: RSDT (v001 A M I OEMRSDT 04352.00774) @ 0x3ff30000 <6>ACPI: FADT (v002 A M I OEMFACP 04352.00774) @ 0x3ff30200 <6>ACPI: MADT (v001 A M I OEMAPIC 04352.00774) @ 0x3ff30390 <6>ACPI: OEMB (v001 A M I OEMBIOS 04352.00774) @ 0x3ff40040 <6>ACPI: DSDT (v001 P4P81 P4P81088 00000.00136) @ 0x00000000 <6>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) <4>Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) <6>IOAPIC[0]: Assigned apic_id 2 <4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 <6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) <6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) <6>Using ACPI (MADT) for SMP configuration information <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hda2 vga=0x31a desktop hdd=ide-scsi hddlun=0 splash=silent <6>ide_setup: hdd=ide-scsi <6>ide_setup: hddlun=0 <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 2998.818 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 5931.00 BogoMIPS <6>Memory: 1022724k/1047744k available (1868k kernel code, 16312k reserved, 638k data, 188k init, 130240k highmem) <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch ([email protected]) <4>mtrr: detected mtrr type: Intel <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 <4>per-CPU timeslice cutoff: 1462.98 usecs. <4>task migration cache decay timeout: 2 msecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 5980.16 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 <6>Total of 2 processors activated (11911.16 BogoMIPS). <4>cpu_sibling_map[0] = 1 <4>cpu_sibling_map[1] = 0 <4>ENABLING IO-APIC IRQs <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 16. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 00178020 <7>....... : arbitration: 00 <4>An unexpected IO-APIC was found. If this kernel release is less than <4>three months old please report this to [email protected] <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 003 03 0 0 0 0 0 1 1 39 <7> 02 003 03 0 0 0 0 0 1 1 31 <7> 03 003 03 0 0 0 0 0 1 1 41 <7> 04 003 03 0 0 0 0 0 1 1 49 <7> 05 003 03 0 0 0 0 0 1 1 51 <7> 06 003 03 0 0 0 0 0 1 1 59 <7> 07 003 03 0 0 0 0 0 1 1 61 <7> 08 003 03 0 0 0 0 0 1 1 69 <7> 09 003 03 1 1 0 0 0 1 1 71 <7> 0a 003 03 0 0 0 0 0 1 1 79 <7> 0b 003 03 0 0 0 0 0 1 1 81 <7> 0c 003 03 0 0 0 0 0 1 1 89 <7> 0d 003 03 0 0 0 0 0 1 1 91 <7> 0e 003 03 0 0 0 0 0 1 1 99 <7> 0f 003 03 0 0 0 0 0 1 1 A1 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:5 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ11 -> 0:11 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 2998.0158 MHz. <4>..... host bus clock speed is 199.0876 MHz. <4>cpu: 0, clocks: 199876, slice: 66625 <4>CPU0<T0:199872,T1:133216,D:31,S:66625,C:199876> <4>cpu: 1, clocks: 199876, slice: 66625 <4>CPU1<T0:199872,T1:66608,D:14,S:66625,C:199876> <4>checking TSC synchronization across CPUs: passed. <4>migration_task 0 on cpu=0 <4>migration_task 1 on cpu=1 <6>ACPI: Subsystem revision 20030619 <6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 <6>PCI: Using configuration type 1 <6>Looking for DSDT in initrd ... not found! <7>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:0 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) <6>PCI: Probing PCI hardware <7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18) Mode:1 Active:1 <7>00:00:1f[A] -> 2-18 -> IRQ 18 <7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1 Active:1 <7>00:00:1f[B] -> 2-17 -> IRQ 17 <7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16) Mode:1 Active:1 <7>00:00:1d[A] -> 2-16 -> IRQ 16 <7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1 Active:1 <7>00:00:1d[B] -> 2-19 -> IRQ 19 <7>Pin 2-18 already programmed <7>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) Mode:1 Active:1 <7>00:00:1d[D] -> 2-23 -> IRQ 23 <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20) Mode:1 Active:1 <7>00:02:08[A] -> 2-20 -> IRQ 20 <7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21) Mode:1 Active:1 <7>00:02:09[A] -> 2-21 -> IRQ 21 <7>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22) Mode:1 Active:1 <7>00:02:09[B] -> 2-22 -> IRQ 22 <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-22 already programmed <7>Pin 2-20 already programmed <7>Pin 2-23 already programmed <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <5>apm: disabled - APM is not SMP safe. <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 65484 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xe8000000, mapped to 0xf881b000, size 65536k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1 <6>vesafb: protected mode interface info at c000:e800 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 30981 bytes, found (1280x1024, 15663 bytes, v3). <6>bootsplash: silent jpeg found. <6>bootsplash: silent jpeg found. <4>Console: switching to colour frame buffer device 148x51 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>PIIX-4: IDE controller at PCI slot 00:1f.1 <4>PCI: Enabling device 00:1f.1 (0005 -> 0007) <6>PIIX-4: chipset revision 2 <6>PIIX-4: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: MAXTOR 4K060H3, ATA DISK drive <4>hdb: ST3160021A, ATA DISK drive <4>blk: queue c046ad40, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c046aea4, I/O limit 4095Mb (mask 0xffffffff) <4>hdc: ATAPI DVD-ROM 16X Maximum, ATAPI CD/DVD-ROM drive <4>hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 117266688 sectors (60041 MB) w/2000KiB Cache, CHS=7299/255/63, UDMA(100) <4>hdb: attached ide-disk driver. <4>hdb: host protected area => 1 <6>hdb: 312581808 sectors (160042 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100) <6>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 <6> hdb: hdb1 <6>ide-floppy driver 0.99.newide <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 8192 buckets, 64Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>cryptoapi: loaded <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 262k freed <4>VFS: Mounted root (ext2 filesystem). <6>Journalled Block Device driver loaded <6>EXT3-fs: INFO: recovery required on readonly filesystem. <6>EXT3-fs: write access will be enabled during recovery. <7>(recovery.c, 256): journal_recover_Rsmp_71301b23: JBD: recovery, exit status 0, recovered transactions 12349 to 12367 <7>(recovery.c, 258): journal_recover_Rsmp_71301b23: JBD: Replayed 1965 and revoked 2/41 blocks <6>kjournald starting. Commit interval 5 seconds <6>EXT3-fs: ide0(3,2): orphan cleanup on readonly fs <7>ext3_orphan_cleanup: deleting unreferenced inode 3982488 <7>ext3_orphan_cleanup: deleting unreferenced inode 3982487 <7>ext3_orphan_cleanup: deleting unreferenced inode 3982486 <7>ext3_orphan_cleanup: deleting unreferenced inode 4112698 <7>ext3_orphan_cleanup: deleting unreferenced inode 4112697 <7>ext3_orphan_cleanup: deleting unreferenced inode 4112696 <6>EXT3-fs: ide0(3,2): 6 orphan inodes deleted <6>EXT3-fs: recovery complete. <6>EXT3-fs: mounted filesystem with ordered data mode. <4>VFS: Mounted root (ext3 filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 188k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal <6>lvm-mp: allocating 42 lowmem entries at c3361000 <6>LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded <6>Adding Swap: 1052216k swap-space (priority 42) <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>hdc: attached ide-cdrom driver. <6>hdc: ATAPI 48X DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <6>SCSI subsystem driver Revision: 1.00 <4>hdd: attached ide-scsi driver. <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: _NEC Model: DVD_RW ND-1300A Rev: 1.05 <4> Type: CD-ROM ANSI SCSI revision: 02 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Mon Mar 1 20:05:38 2004 <notice>run boot scripts (setserial boot.proc) Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports done<notice>exit status of (setserial boot.proc) is (0 0) <notice>run boot scripts (boot.md) <notice>exit status of (boot.md) is (0) <notice>run boot scripts (boot.lvm) Run file system check on root for LVM activation fsck 1.34 (25-Jul-2003) /dev/hda2: clean, 149026/7208960 files, 2623002/14394240 blocks doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done <notice>exit status of (boot.lvm) is (0) <notice>run boot scripts (boot.localfs) Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.34 (25-Jul-2003) /dev/hda2: clean, 149026/7208960 files, 2623002/14394240 blocks /dev/hdb1: recovering journal /dev/hdb1: clean, 6180/19546112 files, 10506671/39070072 blocks doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdb1 on /fs-global type ext3 (rw) done<notice>exit status of (boot.localfs) is (0) <notice>run boot scripts (boot.crypto) <notice>exit status of (boot.crypto) is (0) <notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shmdone Restore device permissionsdone Loading required kernel modules done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0) <notice>run boot scripts (boot.idedma boot.clock) Setting up the CMOS clockdone <notice>exit status of (boot.idedma boot.clock) is (0 0) <notice>run boot scripts (boot.ldconfig) Setting up timezone datadone <notice>exit status of (boot.ldconfig) is (0) <notice>run boot scripts (boot.sched boot.localnet boot.isapnp) Setting scheduling timeslices unused Setting up hostname 'horizon'done Setting up loopback interface done <notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0) <notice>run boot scripts (boot.klog boot.ipconfig) Enabling syn flood protectiondone Disabling IP forwardingdone Creating /var/log/boot.msg done<notice>killproc: kill(31,29) <notice>exit status of (boot.klog boot.ipconfig) is (0 0) System Boot Control: The system has been setup Skipped features: boot.sched System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(31,3) Boot logging started on /dev/tty1(/dev/console) at Mon Mar 1 19:05:50 2004 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>start services (random isdn) Initializing random number generatordone Setting up ISDN card contr0 AVM FRITZ!Card PCIdone Loading Driver contr0 1 kcapi capi capidrvdone Initializing capi for contr0 (1)done <notice>exit status of (random isdn) is (0 0) <notice>start services (network) Setting up network interfaces: lo done eth0 IP/Netmask: 192.168.168.254 / 255.255.255.0 done <notice>exit status of (network) is (0) <notice>start services (syslog) Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/klogd ] done <notice>exit status of (syslog) is (0) <notice>start services (hotplug) Starting hotplugging services [ ieee1394 net pci usb .... ]done <notice>exit status of (hotplug) is (0) <notice>start services (resmgr) Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/resmgrd ] done <notice>exit status of (resmgr) is (0) <notice>start services (vmware splash_early portmap nmb) <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone <notice>startproc: execve (/usr/lib/samba/classic/nmbd) [ /usr/lib/samba/classic/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/nmbd ] Starting Samba classic NMB daemon done Starting VMware services: Virtual machine monitor done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done Host-only networking on /dev/vmnet8 (background) done NAT networking on /dev/vmnet8 done <notice>exit status of (vmware splash_early portmap nmb) is (0 0 0 0) <notice>start services (smbfs) Mount SMB File System unused <notice>exit status of (smbfs) is (6) <notice>start services (sshd named fbset amavis alsasound acpid) <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting SSH daemondone <notice>startproc: execve (/usr/sbin/amavisd) [ /usr/sbin/amavisd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/amavisd ] Starting virus-scanner (amavisd-new):failed <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/acpid ] Loading ACPI modules (ac battery button fan processor thermal ) done Starting acpid done <notice>startproc: execve (/usr/sbin/named) [ /usr/sbin/named -t /var/lib/named -u named ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/sbin:/usr/sbin:/bin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/named ] Starting name server BIND 9 - Warning: /var/lib/named/var/run/named/named.pid exists! done Starting sound driver: intel8x0done Restoring the previous sound settingdone <notice>exit status of (sshd named fbset amavis alsasound acpid) is (0 0 0 7 0 0) <notice>start services (splash kbd cups) <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting cupsddone Loading keymap qwertz/de-latin1-nodeadkeys.map.gz done^GLoading compose table latin1.adddone Stop Unicode mode doneLoading console font lat9w-16.psfu -m trivial (B done<notice>exit status of (splash kbd cups) is (0 0 0) <notice>start services (xinetd smb postfix hwscan) Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=36 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ] Starting INET services. (xinetd)done Starting mail service (Postfix)done Samba SMB: Waiting for cupsd to get ready(29s) (28s) (27s) (26s) (25s) (24s) (23s) (22s) <notice>startproc: execve (/usr/lib/samba/classic/smbd) [ /usr/lib/samba/classic/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp progress=36 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/lib/samba/classic/smbd ] (21s) (20s) (19s) (18s) done Starting Samba classic SMB daemon done <notice>exit status of (xinetd smb postfix hwscan) is (0 0 0 0) <notice>start services (xdm) Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=40 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE@euro PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE@euro splash=silent sscripts=44 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Pid_file "/var/spool/amavis/amavisd.pid" already exists. Overwriting! done <notice>exit status of (xdm) is (0) <notice>start services (apache) Starting httpd [ ]<notice>startproc: execve (/usr/sbin/httpd) [ /usr/sbin/httpd -f /etc/httpd/httpd.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 LD_LIBRARY_PATH=:/lib INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 DBROOT=/dev/null HOME=/ SHLVL=2 splash=silent sscripts=44 ORACLE_HOME= _=/sbin/startproc DAEMON=/usr/sbin/httpd ] done <notice>exit status of (apache) is (0) <notice>start services (nscd cron) <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cron ] <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting CRON daemondone Starting Name Service Cache Daemondone <notice>exit status of (nscd cron) is (0 0) <notice>start services (splash_late) <notice>exit status of (splash_late) is (0) Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: amavis Skipped services in runlevel 5: smbfs <notice>killproc: kill(663,3) ------------------------------------------------------------------------------- 1.9 scsi - /usr/sbin/hwinfo --scsi 05: SCSI 00.0: 10602 CD-ROM (DVD-R) [Created at scsi.237] Unique ID: zyP1.idqwXSU7uc6 Hardware Class: cdrom Model: "_NEC DVD_RW ND-1300A" Vendor: "_NEC" Device: "_NEC DVD_RW ND-1300A" Revision: "1.05" Serial ID: "" Driver: "ide-scsi" Device File: /dev/sr0 (/dev/hdd) Features: CD-R, CD-RW, DVD, DVD-R Config Status: cfg=no, avail=yes, need=no, active=unknown Drive Speed: 40 ------------------------------------------------------------------------------- 1.10 media links - --- /cd - /dvd --- --- /media/ --- insgesamt 24 drwxr-xr-x 2 root root 4096 2004-02-29 20:38 cdrecorder drwxr-xr-x 2 root root 4096 2003-09-23 20:02 cdrom drwxr-xr-x 2 root root 4096 2004-02-29 20:38 dvd drwxr-xr-x 2 root root 4096 2004-02-29 20:38 dvdrecorder drwxr-xr-x 2 root root 4096 2003-09-23 20:02 floppy drwxr-xr-x 2 root root 4096 2004-03-01 11:26 tmp --- /dev/cdr* --- lrwxrwxrwx 1 root root 3 2004-02-29 20:38 /dev/cdrecorder -> sr0 lrwxrwxrwx 1 root root 3 2004-02-29 20:38 /dev/cdrom -> hdc --- /dev/dvd* --- lrwxrwxrwx 1 root root 3 2004-02-29 20:38 /dev/dvd -> hdc lrwxrwxrwx 1 root root 3 2004-02-29 20:38 /dev/dvdrecorder -> sr0 --- /dev/cdrecorder* --- lrwxrwxrwx 1 root root 3 2004-02-29 20:38 /dev/cdrecorder -> sr0 --- /dev/fd? --- brw------- 1 paetzold disk 2, 0 2003-09-23 19:59 /dev/fd0 brw------- 1 paetzold disk 2, 1 2003-09-23 19:59 /dev/fd1 ------------------------------------------------------------------------------- 1.11 hwinfo-storage - /usr/sbin/hwinfo --storage_ctrl 01: None 00.0: 0102 Floppy disk controller [Created at floppy.111] Unique ID: rdCR.3wRL2_g4d2B Hardware Class: storage Model: "Floppy disk controller" Config Status: cfg=no, avail=yes, need=no, active=unknown 22: PCI 1f.1: 0101 IDE interface [Created at pci.65] Unique ID: 3p2J.mCg4nggHnv5 Hardware Class: storage Model: "Asustek 82801EB Ultra ATA Storage Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x24db "82801EB Ultra ATA Storage Controller" SubVendor: pci 0x1043 "Asustek Computer, Inc." SubDevice: pci 0x80a6 Revision: 0x02 I/O Ports: 0xfc00-0xfc0f (rw) Memory Range: 0x40000000-??? (rw,non-prefetchable) IRQ: 18 (no events) I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) IRQ: 14 (10184 events) IRQ: 15 (1535 events) Config Status: cfg=no, avail=yes, need=no, active=unknown 27: PCI 204.0: 0104 RAID bus controller [Created at pci.65] Unique ID: UVH2.oDNlM4kNTO5 Parent ID: 6NW+.c7JTK_YUBi2 Hardware Class: storage Model: "Asustek RAID bus controller" Vendor: pci 0x1106 "VIA Technologies, Inc." Device: pci 0x3164 SubVendor: pci 0x1043 "Asustek Computer, Inc." SubDevice: pci 0x80f4 Revision: 0x06 I/O Ports: 0xdfe0-0xdfe7 (rw) I/O Ports: 0xdfac-0xdfaf (rw) I/O Ports: 0xdfa0-0xdfa7 (rw) I/O Ports: 0xdfa8-0xdfab (rw) I/O Ports: 0xdf90-0xdf9f (rw) IRQ: 23 (no events) Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #20 (PCI bridge) ------------------------------------------------------------------------------- 3. Configuration ------------------------------------------------------------------------------- 2.1 grub - /boot/grub/menu.lst color white/blue black/light-gray default 0 timeout 8 gfxmenu (hd0,1)/boot/message title Linux kernel (hd0,1)/boot/vmlinuz root=/dev/hda2 vga=0x31a splash=silent desktop hdd=ide-scsi hddlun=0 showopts initrd (hd0,1)/boot/initrd title Diskette root (fd0) chainloader +1 title Failsafe kernel (hd0,1)/boot/vmlinuz root=/dev/hda2 showopts ide=nodma apm=off acpi=off vga=normal nosmp noapic maxcpus=0 3 initrd (hd0,1)/boot/initrd ------------------------------------------------------------------------------- 2.2 device.map - /boot/grub/device.map (hd0) /dev/hda (fd0) /dev/fd0 ------------------------------------------------------------------------------- 2.3 grub.conf - /etc/grub.conf root (hd0,1) install --stage2=/boot/grub/stage2 /boot/grub/stage1 d (hd0) /boot/grub/stage2 0x8000 (hd0,1)/boot/grub/menu.lst quit ------------------------------------------------------------------------------- 2.4 lilo.conf - /etc/lilo.conf file /etc/lilo.conf not found ------------------------------------------------------------------------------- 2.5 lilo_test - /sbin/lilo -v 3 -t LILO version 22.3.4 (test mode), Copyright (C) 1992-1998 Werner Almesberger Development beyond version 21 Copyright (C) 1999-2002 John Coffman Released 01-Nov-2002 and compiled at 00:11:07 on Sep 24 2003. /etc/lilo.conf: No such file or directory -------------------------------------------------------------------------------