You're asking for these ..... so here is one !!!
Johan Nielsen <[email protected]> Fri, 14 May 2004 09:16:17 +0200
| Newsgroups | org.kernel.vger.linux-smp |
|---|---|
| Message-ID | <[email protected]> |
Latest boo.msg
boot.msg
(text/plain, 30.5 KB)
Inspecting /boot/System.map-2.4.21-215-smp4G Loaded 21751 symbols from /boot/System.map-2.4.21-215-smp4G. Symbols match kernel version 2.4.21. Loaded 177 symbols from 10 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21-215-smp4G ([email protected]) (gcc version 3.3.1 (SuSE Linux)) #1 SMP Tue Apr 27 00:56:55 UTC 2004 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) <4> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) <4> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) <4> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) <4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) <5>128MB vmalloc/ioremap area available. <5>127MB HIGHMEM available. <5>896MB LOWMEM available. <7>ACPI: have wakeup address 0xc0002000 <4>found SMP MP-table at 000ff780 <4>hm, page 000ff000 reserved twice. <4>hm, page 00100000 reserved twice. <4>hm, page 000f1000 reserved twice. <4>hm, page 000f2000 reserved twice. <4>On node 0 totalpages: 261936 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 32560 pages. <6>ACPI: RSDP (v000 ACPIAM ) @ 0x000f9e30 <6>ACPI: RSDT (v001 A M I OEMRSDT 00512.01059) @ 0x3ff30000 <6>ACPI: FADT (v002 A M I OEMFACP 00512.01059) @ 0x3ff30200 <6>ACPI: MADT (v001 A M I OEMAPIC 00512.01059) @ 0x3ff30390 <6>ACPI: OEMB (v001 A M I OEMBIOS 00512.01059) @ 0x3ff40040 <6>ACPI: DSDT (v001 P4CED P4CED102 00000.00258) @ 0x00000000 <6>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 Unknown CPU [15:3] APIC version 20 <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) <4>Processor #1 Unknown CPU [15:3] APIC version 20 <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) <6>IOAPIC[0]: Assigned apic_id 2 <4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 <6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) <6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) <6>Using ACPI (MADT) for SMP configuration information <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hdc8 vga=0x31a desktop hda=ide-scsi hdalun=0 hda=ide-scsi hdalun=0 splash=silent <6>ide_setup: hda=ide-scsi <6>ide_setup: hdalun=0 <6>ide_setup: hda=ide-scsi <6>ide_setup: hdalun=0 <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>Detected 3079.854 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 6078.46 BogoMIPS <6>Memory: 1022612k/1047744k available (1869k kernel code, 16424k reserved, 638k data, 188k init, 130240k highmem) <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) <6>CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K <6>CPU: Physical Processor ID: 0 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch ([email protected]) <4>mtrr: detected mtrr type: Intel <4>Monitor/Mwait feature present. <6>CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03 <4>per-CPU timeslice cutoff: 2925.87 usecs. <4>task migration cache decay timeout: 3 msecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 6144.00 BogoMIPS <4>Monitor/Mwait feature present. <6>CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03 <6>Total of 2 processors activated (12222.46 BogoMIPS). <4>cpu_sibling_map[0] = 1 <4>cpu_sibling_map[1] = 0 <4>ENABLING IO-APIC IRQs <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 16. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 00178020 <7>....... : arbitration: 00 <4>An unexpected IO-APIC was found. If this kernel release is less than <4>three months old please report this to [email protected] <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 0CA 0A 1 0 0 0 0 0 2 88 <7> 01 003 03 0 0 0 0 0 1 1 39 <7> 02 003 03 0 0 0 0 0 1 1 31 <7> 03 003 03 0 0 0 0 0 1 1 41 <7> 04 003 03 0 0 0 0 0 1 1 49 <7> 05 003 03 0 0 0 0 0 1 1 51 <7> 06 003 03 0 0 0 0 0 1 1 59 <7> 07 003 03 0 0 0 0 0 1 1 61 <7> 08 003 03 0 0 0 0 0 1 1 69 <7> 09 003 03 1 1 0 0 0 1 1 71 <7> 0a 003 03 0 0 0 0 0 1 1 79 <7> 0b 003 03 0 0 0 0 0 1 1 81 <7> 0c 003 03 0 0 0 0 0 1 1 89 <7> 0d 003 03 0 0 0 0 0 1 1 91 <7> 0e 003 03 0 0 0 0 0 1 1 99 <7> 0f 003 03 0 0 0 0 0 1 1 A1 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:5 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ11 -> 0:11 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 3079.0301 MHz. <4>..... host bus clock speed is 219.0949 MHz. <4>cpu: 0, clocks: 219949, slice: 73316 <4>CPU0<T0:219936,T1:146608,D:12,S:73316,C:219949> <4>cpu: 1, clocks: 219949, slice: 73316 <4>CPU1<T0:219936,T1:73296,D:8,S:73316,C:219949> <4>checking TSC synchronization across CPUs: passed. <4>migration_task 0 on cpu=0 <4>migration_task 1 on cpu=1 <6>ACPI: Subsystem revision 20030619 <6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 <6>PCI: Using configuration type 1 <6>Looking for DSDT in initrd ... not found! <7>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:0 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.2 <4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) <6>PCI: Probing PCI hardware <7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18) Mode:1 Active:1 <7>00:00:1f[A] -> 2-18 -> IRQ 18 <7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1 Active:1 <7>00:00:1f[B] -> 2-17 -> IRQ 17 <7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16) Mode:1 Active:1 <7>00:00:1d[A] -> 2-16 -> IRQ 16 <7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1 Active:1 <7>00:00:1d[B] -> 2-19 -> IRQ 19 <7>Pin 2-18 already programmed <7>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) Mode:1 Active:1 <7>00:00:1d[D] -> 2-23 -> IRQ 23 <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20) Mode:1 Active:1 <7>00:03:08[A] -> 2-20 -> IRQ 20 <7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21) Mode:1 Active:1 <7>00:03:09[A] -> 2-21 -> IRQ 21 <7>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22) Mode:1 Active:1 <7>00:03:09[B] -> 2-22 -> IRQ 22 <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-20 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-21 already programmed <7>Pin 2-22 already programmed <7>Pin 2-23 already programmed <7>Pin 2-20 already programmed <7>Pin 2-20 already programmed <7>Pin 2-23 already programmed <7>Pin 2-18 already programmed <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <5>apm: disabled - APM is not SMP safe. <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>kinoded started <5>VFS: Disk quotas vdquot_6.5.1 <5>aio_setup: num_physpages = 65484 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xe8000000, mapped to 0xf881b000, size 16384k <6>vesafb: mode is 1280x1024x16, linelength=4096, pages=2 <6>vesafb: protected mode interface info at c000:7c80 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 30981 bytes, found (1280x1024, 15663 bytes, v3). <6>bootsplash: silent jpeg found. <6>bootsplash: silent jpeg found. <4>Console: switching to colour frame buffer device 148x51 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ICH5-SATA: IDE controller at PCI slot 00:1f.2 <6>ICH5-SATA: chipset revision 2 <6>ICH5-SATA: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: LITE-ON DVDRW SOHW-812S, ATAPI CD/DVD-ROM drive <4>hdb: Maxtor 6Y200P0, ATA DISK drive <4>blk: queue c046aea4, I/O limit 4095Mb (mask 0xffffffff) <4>hdc: WDC WD2500JD-00FYB0, ATA DISK drive <4>hdd: WDC WD2500JD-00GBB0, ATA DISK drive <4>blk: queue c046b1e4, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c046b348, I/O limit 4095Mb (mask 0xffffffff) <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hdb: attached ide-disk driver. <4>hdb: host protected area => 1 <6>hdb: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(100) <4>hdc: attached ide-disk driver. <4>hdc: host protected area => 1 <6>hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) <4>hdd: attached ide-disk driver. <4>hdd: host protected area => 1 <6>hdd: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) <6>ide-floppy driver 0.99.newide <6>Partition check: <6> hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 > <6> hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 > <6> hdd: hdd1 hdd2 < hdd5 hdd6 > <6>ide-floppy driver 0.99.newide <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 8192 buckets, 64Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>cryptoapi: loaded <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 374k freed <4>VFS: Mounted root (ext2 filesystem). <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <7>Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide1(22,8)) ... <4>for (ide1(22,8)) <4>Using r5 hash to sort names <4>VFS: Mounted root (reiserfs filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 188k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <4>reiserfs: enabling write barrier flush mode <6>lvm-mp: allocating 42 lowmem entries at cdc55000 <6>LVM version 1.0.5+(mp-v6d)(22/07/2002) module loaded <4>reiserfs: enabling write barrier flush mode <6>Adding Swap: 1951856k swap-space (priority 42) <4>reiserfs: enabling write barrier flush mode <4>reiserfs: enabling write barrier flush mode <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide1(22,65)) ... <4>for (ide1(22,65)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide1(22,69)) ... <4>for (ide1(22,69)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide1(22,9)) ... <4>for (ide1(22,9)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide1(22,11)) ... <4>for (ide1(22,11)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide1(22,13)) ... <4>for (ide1(22,13)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide1(22,10)) ... <4>for (ide1(22,10)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide1(22,12)) ... <4>for (ide1(22,12)) <4>Using r5 hash to sort names <6>NTFS driver 2.1.4a [Flags: R/O MODULE]. <6>NTFS volume version 3.1. <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,69)) ... <4>for (ide0(3,69)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,70)) ... <4>for (ide0(3,70)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (device ide0(3,72)) ... <4>for (ide0(3,72)) <4>Using r5 hash to sort names <4>hda: attached ide-scsi driver. <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: LITE-ON Model: DVDRW SOHW-812S Rev: US0F <4> Type: CD-ROM ANSI SCSI revision: 02 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Thu May 13 19:53:56 2004 <notice>run boot scripts (setserial boot.proc) Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports done<notice>exit status of (setserial boot.proc) is (0 0) <notice>run boot scripts (boot.md) <notice>exit status of (boot.md) is (0) <notice>run boot scripts (boot.lvm) Run file system check on root for LVM activation fsck 1.34 (25-Jul-2003) Reiserfs super block in block 16 on 0x1608 of format 3.6 with standard journal Blocks (total/free): 2560351/1451361 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done <notice>exit status of (boot.lvm) is (0) <notice>run boot scripts (boot.localfs) Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.34 (25-Jul-2003) Reiserfs super block in block 16 on 0x1608 of format 3.6 with standard journal Blocks (total/free): 2560351/1451361 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished Reiserfs super block in block 16 on 0x345 of format 3.6 with standard journal Blocks (total/free): 19579210/522579 by 4096 bytes Reiserfs super block in block 16 on 0x1641 of format 3.6 with standard journal Blocks (total/free): 26214055/1570555 by 4096 bytes Filesystem is clean Filesystem is clean Replaying journal.. Replaying journal.. /dev/hdc5: clean, 41/40160 files, 9824/160616 blocks /dev/hdc6: clean, 11/40160 files, 5075/160616 blocks /dev/hdc7: clean, 11/40160 files, 5075/160616 blocks Reiserfs super block in block 16 on 0x1609 of format 3.6 with standard journal Blocks (total/free): 2560351/2269217 by 4096 bytes Filesystem is clean Replaying journal.. 0 transactions replayed 0 transactions replayed 0 transactions replayed Checking internal tree..finished Reiserfs super block in block 16 on 0x160b of format 3.6 with standard journal Blocks (total/free): 2560351/2552061 by 4096 bytes Filesystem is clean Replaying journal.. 0 transactions replayed Checking internal tree..Checking internal tree..finished Reiserfs super block in block 16 on 0x160d of format 3.6 with standard journal Blocks (total/free): 26750225/1679775 by 4096 bytes Filesystem is clean Replaying journal.. finished Reiserfs super block in block 16 on 0x346 of format 3.6 with standard journal Blocks (total/free): 19579210/1189361 by 4096 bytes Filesystem is clean Replaying journal.. 0 transactions replayed 0 transactions replayed Checking internal tree..Checking internal tree..finished Reiserfs super block in block 16 on 0x348 of format 3.6 with standard journal Blocks (total/free): 10359893/2190449 by 4096 bytes Filesystem is clean Replaying journal.. 0 transactions replayed finished Reiserfs super block in block 16 on 0x1645 of format 3.6 with standard journal Blocks (total/free): 34342945/880294 by 4096 bytes Filesystem is clean Replaying journal.. Checking internal tree..finished 0 transactions replayed Checking internal tree..finished Reiserfs super block in block 16 on 0x160a of format 3.6 with standard journal Blocks (total/free): 2560351/293890 by 4096 bytes Filesystem is clean Replaying journal.. 0 transactions replayed Checking internal tree..finished Checking internal tree..finished doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdc5 on /boot type ext2 (rw) /dev/hdc6 on /mnt/boot-gentoo type ext2 (rw) /dev/hdc7 on /mnt/boot9-1 type ext2 (rw) /dev/hdd1 on /mnt/dc1 type reiserfs (rw) /dev/hdd5 on /mnt/dc2 type reiserfs (rw) /dev/hdc9 on /mnt/gentoo type reiserfs (rw) /dev/hdc11 on /mnt/home9-1 type reiserfs (rw) /dev/hdc13 on /mnt/nn type reiserfs (rw) /dev/hdc10 on /mnt/root9-1 type reiserfs (rw) /dev/hdc12 on /mnt/dc type reiserfs (rw) /dev/hdc1 on /mnt/xp type ntfs (rw) /dev/hdb5 on /mnt/t1 type reiserfs (rw) /dev/hdb6 on /mnt/t2 type reiserfs (rw) /dev/hdb8 on /mnt/t3 type reiserfs (rw,noexec,nosuid,nodev) done<notice>exit status of (boot.localfs) is (0) <notice>run boot scripts (boot.crypto) <notice>exit status of (boot.crypto) is (0) <notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shmdone Restore device permissionsdone Loading required kernel modules done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0) <notice>run boot scripts (boot.idedma boot.clock) Setting up the CMOS clockdone <notice>exit status of (boot.idedma boot.clock) is (0 0) <notice>run boot scripts (boot.ldconfig) Setting up timezone datadone <notice>exit status of (boot.ldconfig) is (0) <notice>run boot scripts (boot.sched boot.localnet boot.isapnp) Setting scheduling timeslices unused Setting up hostname 'linux'done Setting up loopback interface done <notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0) <notice>run boot scripts (boot.klog boot.ipconfig) Enabling syn flood protectiondone Disabling IP forwardingdone Creating /var/log/boot.msg done<notice>killproc: kill(35,29) <notice>exit status of (boot.klog boot.ipconfig) is (0 0) System Boot Control: The system has been setup Skipped features: boot.sched System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(35,3) Boot logging started on /dev/tty1(/dev/console) at Thu May 13 17:55:04 2004 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>start services (random isdn) Initializing random number generatordone <notice>exit status of (random isdn) is (0 0) <notice>start services (network) Setting up network interfaces: lo done eth0 (DHCP) <notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -H -D -N -t 999999 -h linux eth0 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh OLDPWD=/etc/sysconfig/network progress=18 INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=148 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/etc/sysconfig/network PREVLEVEL=N LINES=51 HOME=/ SHLVL=4 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/dhcpcd ] . . . . . . . . . . . . <notice>pidofproc: dhcpcd 861 IP/Netmask: 192.168.2.3 / 255.255.255.0done <notice>exit status of (network) is (0) <notice>start services (syslog) Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 2 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/klogd ] done <notice>exit status of (syslog) is (0) <notice>start services (smartd resmgr) <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/resmgrd ] <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/smartd ] Starting resource managerdone Starting smartddone <notice>exit status of (smartd resmgr) is (0 0) <notice>start services (splash_early ippl) Starting ippl protocols logger<notice>startproc: execve (/usr/sbin/ippl) [ /usr/sbin/ippl ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/ippl ] done <notice>exit status of (splash_early ippl) is (0 0) <notice>start services (xfs scanlogd rpmconfigcheck pure-ftpd microcode fbset alsasound acpid) <notice>startproc: execve (/usr/sbin/scanlogd) [ /usr/sbin/scanlogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/scanlogd ] Starting service scanlogddone Checking/updating CPU microcodedone <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/acpid ] Loading ACPI modules (ac battery button fan processor thermal ) done Starting acpid done <notice>startproc: execve (/usr/sbin/pure-ftpd) [ /usr/sbin/pure-ftpd -a100 -b -c10 -B -C3 -d -z -D -E -fftp -I15 -L2000:8 -m4 -s -U177:077 -u100 -x -r -i -1 -Ow3c:/var/log/pureftpd.log -K -j -k99 -G -Z ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/pure-ftpd ] Starting pure-ftpddone Starting sound driver: intel8x0done Restoring the previous sound settingdone Starting X Font Server<notice>startproc: execve (/usr/X11R6/bin/xfs) [ /usr/X11R6/bin/xfs -nodaemon -user nobody -port 7100 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/X11R6/bin/xfs ] done <notice>exit status of (xfs scanlogd rpmconfigcheck pure-ftpd microcode fbset alsasound acpid) is (0 0 0 0 0 0 0 0) <notice>start services (splash postfix kbd) Starting mail service (Postfix)done Loading keymap qwerty/dk-latin1.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Stop Unicode mode doneLoading console font lat1-16.psfu -m none (B done<notice>exit status of (splash postfix kbd) is (0 0 0) <notice>start services (nscd hwscan) Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone <notice>exit status of (nscd hwscan) is (0 0) <notice>start services (xdm splash_late) Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=37 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=da_DK PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=da_DK splash=silent sscripts=38 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done <notice>exit status of (xdm splash_late) is (0 0) Master Resource Control: runlevel 5 has been reached <notice>killproc: kill(686,3)