Re: Dual Core CPU on Abit NI8-Board
Frank von Daak <[email protected]> Wed, 5 Apr 2006 09:13:57 +0200
| Newsgroups | org.kernel.vger.linux-smp |
|---|---|
| Message-ID | <[email protected]> |
Hi! Am Wednesday, 5. April 2006 08:39 schrieb [email protected]: >This sounds suspiciously to me like those kernels don't have SMP support >built in. Are those kernels you built yourself or obtained from your > distro? I've build them myself with smp-support enabled. I've also tried a debian-smp-kernel with the same behaviour... >On Wed, Apr 05, 2006 at 08:28:02AM +0200, Frank von Daak wrote: >> Hello to all! >> >> I hope that this is the right place for me to report my problem - if not, >> please tell me! >> >> Some days ago I've purchased a new motherboard, cpu and graphics-adapters. >> The board is called "Abit NI8 SLI" which has a nForce4-Chipset and a >> socket 775. >> >> http://www.abit-usa.com/products/mb/products.php?categories=1&model=280 >> >> The CPU is a Pentium-D 2,8 GHz. And the graphics-adapters are two >> GeForce7800GTX-Cards... >> >> My problem is, that a "cat /proc/cpuinfo" shows me just one cpu with one >> core. I've tested this with kernels 2.6.16.1 and 2.6.17-rc1 (x86 and >> x86_64) >> >> If I add the following line in my lilo.conf to the kernel, I can see both >> cpu's: >> append="pci=noacpi pci=routeirq noapic acpi=off" >> >> After this my cpuinfo looks like this: >> http://www.kpage.de/cpuinfo.txt >> >> and dmesg say's this: >> http://www.kpage.de/dmesg.txt >> >> But if I do so, the machine is running very unstable and is hanging after >> a while. The crashes will happen espacialy if I run OpenGL-Applications >> like "glxgears". >> >> Can someone of you tell me, what I can do to fix this problem? >> If you need further information, please tell me! >> >> Thank you very much and greetings! >> Frank >> >> -- >> Name: Frank von Daak >> eMail: [email protected] Homepage: http://www.kpage.de >> "It takes a revolution, to make a solution! >> Bob Marley" >> - >> To unsubscribe from this list: send the line "unsubscribe linux-smp" in >> the body of a message to [email protected] >> More majordomo info at http://vger.kernel.org/majordomo-info.html > >- >To unsubscribe from this list: send the line "unsubscribe linux-smp" in >the body of a message to [email protected] >More majordomo info at http://vger.kernel.org/majordomo-info.html -- -- Frank von Daak [email protected]