Re: smp and irq conflict

>>>>> "BD" == Bill Davidsen <[email protected]> writes:

BD> You may be able to move one board to another slot, but looking at
BD> the bandwidth I suspect you may need a server motherboard with
BD> multiple busses, preferably running at 66MHz 64bit. I don't think
BD> this is a interrupt problem, but you can just try capture on two
BD> channels which share an interrupt, like bttv0 and bttv7 to verify
BD> that.

66MHz 64bit isn't much fun when the capture cards are 33MHz 32bit.


/Benny