[PATCH 1/4] ALSA: doc: usb-audio: Add doc for QUIRK_FLAG_ALWAYS_SET_RATE

QUIRK_FLAG_ALWAYS_SET_RATE was introduced into usb-audio before without
appropriate documentation, so add it.

There is an odd colon in its comments, so remove it too.

As this is often forgotten, also add a reminder to the end of the
enumeration.

Fixes: 786f91da8535 ("ALSA: usb-audio: add QUIRK_FLAG_ALWAYS_SET_RATE for Mackie DLZ Creator XS")
Signed-off-by: Rong Zhang <[email protected]>
---
 Documentation/sound/alsa-configuration.rst | 5 +++++
 sound/usb/usbaudio.h                       | 4 ++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
index b2171472e6cb..71733e807a7c 100644
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -2406,6 +2406,11 @@ quirk_flags
           works around it by enforcing the fixed max URBs (12) instead of
           the dynamic calculation from the buffer size, and passing the
           `URB_ISO_ASAP` URB flag.
+        * bit 32: ``always_set_rate``
+          Issue SET_CUR for the sample rate even when the clock already reports
+          the requested rate.  A device advertising a single rate is otherwise
+          never sent the request at all, and some require it before streaming
+          will start.
 
 This module supports multiple devices, autoprobe and hotplugging.
 
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index c49709d7ad25..abc2d7e579de 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -260,7 +260,7 @@ extern bool snd_usb_skip_validation;
  *  to insufficient buffer depth combined with xHCI scheduling variability.
  *  The larger buffer (MAX_URBS = 12, ~64ms) absorbs system scheduling
  *  jitter during boot, while URB_ISO_ASAP ensures consistent xHCI scheduling.
- * QUIRK_FLAG_ALWAYS_SET_RATE:
+ * QUIRK_FLAG_ALWAYS_SET_RATE
  *  Issue SET_CUR for the sample rate even when the clock already reports the
  *  requested rate.  A device advertising a single rate is otherwise never sent
  *  the request at all, and some require it before streaming will start.
@@ -300,7 +300,7 @@ enum {
 	QUIRK_TYPE_MIXER_GET_CUR_BROKEN		= 30,
 	QUIRK_TYPE_PLAYBACK_URB_FIXUP		= 31,
 	QUIRK_TYPE_ALWAYS_SET_RATE		= 32,
-/* Please also edit snd_usb_audio_quirk_flag_names */
+/* Please also edit snd_usb_audio_quirk_flag_names and alsa-configuration.rst */
 };
 
 #define QUIRK_FLAG(x)	BIT_U64(QUIRK_TYPE_ ## x)

-- 
2.55.0