[PATCH] ASoC: wcd-mbhc-v2: Fix incorrect properties names and typos

From: David Heidelberg <[email protected]>

Improves debugging experience.

Fixes: 0e5c9e7ff899 ("ASoC: codecs: wcd: add multi button Headset detection support")
Signed-off-by: David Heidelberg <[email protected]>
---
 sound/soc/codecs/wcd-mbhc-v2.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/wcd-mbhc-v2.c b/sound/soc/codecs/wcd-mbhc-v2.c
index bb0c8478a8eb5..850be84d65ceb 100644
--- a/sound/soc/codecs/wcd-mbhc-v2.c
+++ b/sound/soc/codecs/wcd-mbhc-v2.c
@@ -859,17 +859,17 @@ static int wcd_get_voltage_from_adc(u8 val, int micbias)
 static int wcd_measure_adc_continuous(struct wcd_mbhc *mbhc)
 {
 	u8 adc_result;
 	int output_mv;
 	int retry = 3;
 	u8 adc_en;
 
 	/* Pre-requisites for ADC continuous measurement */
-	/* Read legacy electircal detection and disable */
+	/* Read legacy electrical detection and disable */
 	wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0x00);
 	/* Set ADC to continuous measurement */
 	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 1);
 	/* Read ADC Enable bit to restore after adc measurement */
 	adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN);
 	/* Disable ADC_ENABLE bit */
 	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
 	/* Disable MBHC FSM */
@@ -960,17 +960,17 @@ static int wcd_check_cross_conn(struct wcd_mbhc *mbhc)
 	u8 adc_mode, elect_ctl, adc_en, fsm_en;
 	int hphl_adc_res, hphr_adc_res;
 	bool is_cross_conn = false;
 
 	/* If PA is enabled, dont check for cross-connection */
 	if (wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN))
 		return -EINVAL;
 
-	/* Read legacy electircal detection and disable */
+	/* Read legacy electrical detection and disable */
 	elect_ctl = wcd_mbhc_read_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC);
 	wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0);
 
 	/* Read and set ADC to single measurement */
 	adc_mode = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_MODE);
 	/* Read ADC Enable bit to restore after adc measurement */
 	adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN);
 	/* Read FSM status */
@@ -1465,24 +1465,24 @@ int wcd_dt_parse_mbhc_data(struct device *dev, struct wcd_mbhc_config *cfg)
 	if (of_property_read_bool(np, "qcom,ground-jack-type-normally-closed"))
 		cfg->gnd_swh = false;
 	else
 		cfg->gnd_swh = true;
 
 	ret = of_property_read_u32(np, "qcom,mbhc-headset-vthreshold-microvolt",
 				   &microvolt);
 	if (ret)
-		dev_dbg(dev, "missing qcom,mbhc-hs-mic-max-vthreshold--microvolt in dt node\n");
+		dev_dbg(dev, "missing qcom,mbhc-headset-vthreshold-microvolt in dt node\n");
 	else
 		cfg->hs_thr = microvolt/1000;
 
 	ret = of_property_read_u32(np, "qcom,mbhc-headphone-vthreshold-microvolt",
 				   &microvolt);
 	if (ret)
-		dev_dbg(dev, "missing qcom,mbhc-hs-mic-min-vthreshold-microvolt	entry\n");
+		dev_dbg(dev, "missing qcom,mbhc-headphone-vthreshold-microvolt entry\n");
 	else
 		cfg->hph_thr = microvolt/1000;
 
 	ret = of_property_read_u32_array(np,
 					 "qcom,mbhc-buttons-vthreshold-microvolt",
 					 &cfg->btn_high[0],
 					 WCD_MBHC_DEF_BUTTONS);
 	if (ret)

---
base-commit: 7079a12d7506b07fb53b54a664bfad5fa9b16d70
change-id: 20260823-wcd-dt-typo-fix-9812d3c97fe5

Best regards,
--  
David Heidelberg <[email protected]>