[PATCH v2 25/27 5.10.y] minmax.h: move all the clamp() definitions after the min/max() ones

From: David Laight <[email protected]>

[ Upstream commit c3939872ee4a6b8bdcd0e813c66823b31e6e26f7 ]

At some point the definitions for clamp() got added in the middle of the
ones for min() and max().  Re-order the definitions so they are more
sensibly grouped.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Laight <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Jason A. Donenfeld <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Mateusz Guzik <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Pedro Falcato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Eliav Farber <[email protected]>
---
 include/linux/minmax.h | 109 +++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 58 deletions(-)

diff --git a/include/linux/minmax.h b/include/linux/minmax.h
index 91aa1b90c1bb..75fb7a6ad4c6 100644
--- a/include/linux/minmax.h
+++ b/include/linux/minmax.h
@@ -99,22 +99,6 @@
 #define __careful_cmp(op, x, y) \
 	__careful_cmp_once(op, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_))
 
-#define __clamp(val, lo, hi)	\
-	((val) >= (hi) ? (hi) : ((val) <= (lo) ? (lo) : (val)))
-
-#define __clamp_once(val, lo, hi, uval, ulo, uhi) ({				\
-	__auto_type uval = (val);						\
-	__auto_type ulo = (lo);							\
-	__auto_type uhi = (hi);							\
-	BUILD_BUG_ON_MSG(statically_true(ulo > uhi),				\
-		"clamp() low limit " #lo " greater than high limit " #hi);	\
-	BUILD_BUG_ON_MSG(!__types_ok3(uval, ulo, uhi),				\
-		"clamp("#val", "#lo", "#hi") signedness error");		\
-	__clamp(uval, ulo, uhi); })
-
-#define __careful_clamp(val, lo, hi) \
-	__clamp_once(val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
-
 /**
  * min - return minimum of two values of the same or compatible types
  * @x: first value
@@ -170,6 +154,22 @@
 #define max3(x, y, z) \
 	__careful_op3(max, x, y, z, __UNIQUE_ID(x_), __UNIQUE_ID(y_), __UNIQUE_ID(z_))
 
+/**
+ * min_t - return minimum of two values, using the specified type
+ * @type: data type to use
+ * @x: first value
+ * @y: second value
+ */
+#define min_t(type, x, y) __cmp_once(min, type, x, y)
+
+/**
+ * max_t - return maximum of two values, using the specified type
+ * @type: data type to use
+ * @x: first value
+ * @y: second value
+ */
+#define max_t(type, x, y) __cmp_once(max, type, x, y)
+
 /**
  * min_not_zero - return the minimum that is _not_ zero, unless both are zero
  * @x: value1
@@ -180,6 +180,22 @@
 	typeof(y) __y = (y);			\
 	__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
 
+#define __clamp(val, lo, hi)	\
+	((val) >= (hi) ? (hi) : ((val) <= (lo) ? (lo) : (val)))
+
+#define __clamp_once(val, lo, hi, uval, ulo, uhi) ({				\
+	__auto_type uval = (val);						\
+	__auto_type ulo = (lo);							\
+	__auto_type uhi = (hi);							\
+	BUILD_BUG_ON_MSG(statically_true(ulo > uhi),				\
+		"clamp() low limit " #lo " greater than high limit " #hi);	\
+	BUILD_BUG_ON_MSG(!__types_ok3(uval, ulo, uhi),				\
+		"clamp("#val", "#lo", "#hi") signedness error");		\
+	__clamp(uval, ulo, uhi); })
+
+#define __careful_clamp(val, lo, hi) \
+	__clamp_once(val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
+
 /**
  * clamp - return a value clamped to a given range with strict typechecking
  * @val: current value
@@ -191,28 +207,30 @@
  */
 #define clamp(val, lo, hi) __careful_clamp(val, lo, hi)
 
-/*
- * ..and if you can't take the strict
- * types, you can specify one yourself.
- *
- * Or not use min/max/clamp at all, of course.
- */
-
 /**
- * min_t - return minimum of two values, using the specified type
- * @type: data type to use
- * @x: first value
- * @y: second value
+ * clamp_t - return a value clamped to a given range using a given type
+ * @type: the type of variable to use
+ * @val: current value
+ * @lo: minimum allowable value
+ * @hi: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of type
+ * @type to make all the comparisons.
  */
-#define min_t(type, x, y) __cmp_once(min, type, x, y)
+#define clamp_t(type, val, lo, hi) __careful_clamp((type)(val), (type)(lo), (type)(hi))
 
 /**
- * max_t - return maximum of two values, using the specified type
- * @type: data type to use
- * @x: first value
- * @y: second value
+ * clamp_val - return a value clamped to a given range using val's type
+ * @val: current value
+ * @lo: minimum allowable value
+ * @hi: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of whatever
+ * type the input argument @val is.  This is useful when @val is an unsigned
+ * type and @lo and @hi are literals that will otherwise be assigned a signed
+ * integer type.
  */
-#define max_t(type, x, y) __cmp_once(max, type, x, y)
+#define clamp_val(val, lo, hi) clamp_t(typeof(val), val, lo, hi)
 
 /*
  * Do not check the array parameter using __must_be_array().
@@ -257,31 +275,6 @@
  */
 #define max_array(array, len) __minmax_array(max, array, len)
 
-/**
- * clamp_t - return a value clamped to a given range using a given type
- * @type: the type of variable to use
- * @val: current value
- * @lo: minimum allowable value
- * @hi: maximum allowable value
- *
- * This macro does no typechecking and uses temporary variables of type
- * @type to make all the comparisons.
- */
-#define clamp_t(type, val, lo, hi) __careful_clamp((type)(val), (type)(lo), (type)(hi))
-
-/**
- * clamp_val - return a value clamped to a given range using val's type
- * @val: current value
- * @lo: minimum allowable value
- * @hi: maximum allowable value
- *
- * This macro does no typechecking and uses temporary variables of whatever
- * type the input argument @val is.  This is useful when @val is an unsigned
- * type and @lo and @hi are literals that will otherwise be assigned a signed
- * integer type.
- */
-#define clamp_val(val, lo, hi) clamp_t(typeof(val), val, lo, hi)
-
 static inline bool in_range64(u64 val, u64 start, u64 len)
 {
 	return (val - start) < len;
-- 
2.47.3