Re: [PATCH v7 7/7] iio: dac: Add AD5529R DAC driver support

On 7/22/26 2:54 AM, Janani Sunil wrote:
> Add support for AD5529R 16-channel, 12/16 bit Digital to Analog Converter
> from Analog Devices.
> 

...

> +struct ad5529r_state {
> +	struct spi_device *spi;
> +	const struct ad5529r_model_data *model_data;
> +	struct regmap *regmap_8bit;
> +	struct regmap *regmap_16bit;
> +	struct iio_chan_spec channels[16];

Probably makes sense to make a macro for max num channels.

> +	unsigned int num_channels;
> +	enum ad5529r_output_range output_range_idx[16];
> +};
> +

...

> +static int ad5529r_probe(struct spi_device *spi)
> +{
> +	struct device *dev = &spi->dev;
> +	struct iio_dev *indio_dev;
> +	struct ad5529r_state *st;
> +	struct regmap_config regmap_8bit_cfg;
> +	struct regmap_config regmap_16bit_cfg;
> +	bool external_vref;
> +	u32 dev_addr = 0;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	st = iio_priv(indio_dev);
> +
> +	st->spi = spi;
> +
> +	st->model_data = spi_get_device_match_data(spi);
> +	if (!st->model_data)
> +		return dev_err_probe(dev, -EINVAL,

We should pick a value and stick with it. Latest favorite is ENODATA.

> +				     "Failed to identify device variant\n");
> +
> +	device_property_read_u32(dev, "spi-device-addr", &dev_addr);
> +	if (dev_addr > 3)
> +		return dev_err_probe(dev, -EINVAL,
> +				     "spi-device-addr %u out of range [0, 3]\n",
> +				     dev_addr);
> +
> +	regmap_8bit_cfg = (struct regmap_config) {
> +		.name = "ad5529r-8bit",
> +		.reg_bits = 16,
> +		.val_bits = 8,
> +		.max_register = AD5529R_8BIT_REG_MAX,
> +		.read_flag_mask = AD5529R_SPI_READ_FLAG,
> +		.rd_table = &ad5529r_8bit_readable_table,
> +		.wr_table = &ad5529r_8bit_writeable_table,
> +		.reg_base = dev_addr << AD5529R_ADDR_SHIFT,
> +	};
> +	regmap_16bit_cfg = (struct regmap_config) {
> +		.name = "ad5529r-16bit",
> +		.reg_bits = 16,
> +		.val_bits = 16,
> +		.max_register = AD5529R_MAX_REGISTER,
> +		.read_flag_mask = AD5529R_SPI_READ_FLAG,
> +		.val_format_endian = REGMAP_ENDIAN_LITTLE,
> +		.rd_table = &ad5529r_16bit_readable_table,
> +		.wr_table = &ad5529r_16bit_writeable_table,
> +		.reg_stride = 2,
> +		.reg_base = dev_addr << AD5529R_ADDR_SHIFT,
> +	};
> +
> +	ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(ad5529r_supply_names),
> +					     ad5529r_supply_names);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "Failed to get and enable regulators\n");
> +
> +	ret = devm_regulator_get_enable_optional(dev, "hvss");
> +	if (ret && ret != -ENODEV)
> +		return dev_err_probe(dev, ret,
> +				     "Failed to get and enable hvss regulator\n");
> +
> +	ret = devm_regulator_get_enable_optional(dev, "vref");
> +	if (ret == -ENODEV)
> +		external_vref = false;
> +	else if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "Failed to get and enable vref regulator\n");
> +	else
> +		external_vref = true;
> +
> +	st->regmap_8bit = devm_regmap_init_spi(spi, &regmap_8bit_cfg);
> +	if (IS_ERR(st->regmap_8bit))
> +		return dev_err_probe(dev, PTR_ERR(st->regmap_8bit),
> +				     "Failed to initialize 8-bit regmap\n");
> +
> +	st->regmap_16bit = devm_regmap_init_spi(spi, &regmap_16bit_cfg);
> +	if (IS_ERR(st->regmap_16bit))
> +		return dev_err_probe(dev, PTR_ERR(st->regmap_16bit),
> +				     "Failed to initialize 16-bit regmap\n");
> +
> +	ret = ad5529r_reset(st);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to reset device\n");
> +
> +	ret = regmap_assign_bits(st->regmap_16bit, AD5529R_REG_REF_SEL,
> +				 AD5529R_REF_SEL_INTERNAL_REF,
> +				 external_vref ? 0 : AD5529R_REF_SEL_INTERNAL_REF);

regmap_assign_bits() take bool, so just external_vref without the ?:.

> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to configure reference\n");
> +
> +	ret = ad5529r_parse_channel_ranges(dev, st);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->name = st->model_data->model_name;
> +	indio_dev->info = &ad5529r_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->channels = st->channels;
> +	indio_dev->num_channels = st->num_channels;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +