[PATCH] spi: nxp-fspi: fix runtime PM cleanup on probe failure

nxp_fspi_probe() enables runtime PM before calling pm_runtime_get_sync()
to bring the controller clock on for register initialization.

If pm_runtime_get_sync() fails, the function currently returns immediately.
That leaves runtime PM enabled and leaves the usage counter incremented.
Clean up the failed get with pm_runtime_put_noidle() and disable runtime PM
before returning the error.

Signed-off-by: Jiawen Liu <[email protected]>
---
 drivers/spi/spi-nxp-fspi.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 1e36ae084dd8..c6037f3209c5 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -1352,7 +1352,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	/* enable clock */
 	ret = pm_runtime_get_sync(f->dev);
 	if (ret < 0)
-		return dev_err_probe(dev, ret, "Failed to enable clock");
+		goto err_pm_runtime;
 
 	/* Clear potential interrupts */
 	reg = fspi_readl(f, f->iobase + FSPI_INTR);
@@ -1389,6 +1389,13 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 		return ret;
 
 	return devm_spi_register_controller(&pdev->dev, ctlr);
+
+err_pm_runtime:
+	pm_runtime_put_noidle(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+
+	return dev_err_probe(dev, ret, "Failed to enable clock");
 }
 
 static int nxp_fspi_runtime_suspend(struct device *dev)
-- 
2.34.1