[PATCH v3] dt-bindings: usb: ti,da830-ohci: Convert to DT schema

Convert Texas Instruments da830-ohci bindings from legacy text to DT
schema. Name of binding is changed to match primary compatible property.
Add required property clocks and optional property oc-gpios which were
missing from legacy binding.

Signed-off-by: Bhargav Joshi <[email protected]>
---
Changes in v3:
- Add allOf reference to the common usb-hcd.yaml schema
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Added clocks as required property which was missing in legacy binding.
- Added oc-gpios property which is checked by driver.
- Link to v1: https://patch.msgid.link/[email protected]
---
 .../devicetree/bindings/usb/ohci-da8xx.txt         | 23 --------
 .../devicetree/bindings/usb/ti,da830-ohci.yaml     | 61 ++++++++++++++++++++++
 2 files changed, 61 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
deleted file mode 100644
index 24a826d5015e..000000000000
--- a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-DA8XX USB OHCI controller
-
-Required properties:
-
- - compatible: Should be "ti,da830-ohci"
- - reg:        Should contain one register range i.e. start and length
- - interrupts: Description of the interrupt line
- - phys:       Phandle for the PHY device
- - phy-names:  Should be "usb-phy"
-
-Optional properties:
- - vbus-supply: phandle of regulator that controls vbus power / over-current
-
-Example:
-
-ohci: usb@225000 {
-        compatible = "ti,da830-ohci";
-        reg = <0x225000 0x1000>;
-        interrupts = <59>;
-        phys = <&usb_phy 1>;
-        phy-names = "usb-phy";
-        vbus-supply = <&reg_usb_ohci>;
-};
diff --git a/Documentation/devicetree/bindings/usb/ti,da830-ohci.yaml b/Documentation/devicetree/bindings/usb/ti,da830-ohci.yaml
new file mode 100644
index 000000000000..148b9d0d83da
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,da830-ohci.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,da830-ohci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DA8XX USB OHCI controller
+
+maintainers:
+  - Axel Haslam <[email protected]>
+
+allOf:
+  - $ref: usb-hcd.yaml#
+
+properties:
+  compatible:
+    const: ti,da830-ohci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  phy-names:
+    const: usb-phy
+
+  vbus-supply:
+    description:
+      phandle of regulator that controls vbus power / over-current
+
+  oc-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phys
+  - phy-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    usb@225000 {
+        compatible = "ti,da830-ohci";
+        reg = <0x225000 0x1000>;
+        interrupts = <59>;
+        phys = <&usb_phy 1>;
+        phy-names = "usb-phy";
+        clocks = <&psc1 2>;
+        vbus-supply = <&reg_usb_ohci>;
+    };

---
base-commit: ef0c9f75a19532d7675384708fc8621e10850104
change-id: 20260622-ti-da830-ohci-2a2299d045e2

Best regards,
-- 
Bhargav