[PATCH net-next v4 10/12] ax88179_178a: update driver information

Add additionally supported devices to Kconfig description, add
further requirements such as PHYLINK.

Update driver name in usb_driver and update MODULE_DESCRIPTION
to include the additionally supported chips.

Signed-off-by: Birger Koblitz <[email protected]>
---
 drivers/net/usb/Kconfig        | 9 +++++++--
 drivers/net/usb/Makefile       | 2 +-
 drivers/net/usb/ax88179_178a.c | 8 ++++----
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 52a5c0922c79fc52906d4d4040ec2b3411ff0984..06d3473858670c6e9c60350287bf3c6e30babc81 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -195,9 +195,11 @@ config USB_NET_AX8817X
 	  This driver creates an interface named "ethX", where X depends on
 	  what other networking devices you have in use.
 
-config USB_NET_AX88179_178A
-	tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
+config USB_NET_AX88179
+	tristate "ASIX AX88179/179A/178A USB 3.0/2.0 to Gigabit Ethernet"
 	depends on USB_USBNET
+	select PHYLINK
+	select AX88796B_PHY
 	select CRC32
 	select PHYLIB
 	default y
@@ -207,6 +209,9 @@ config USB_NET_AX88179_178A
 
 	  This driver should work with at least the following devices:
 	    * ASIX AX88179
+	    * ASIX AX88179A/B
+	    * ASIX AX88279
+	    * ASIX AX88772D/E
 	    * ASIX AX88178A
 	    * Sitcomm LN-032
 
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index 2ecead0181eaf8d66fb6f5dbd6f2905b22b6eb57..4026f19ecb826a6465de38f1d9bb0e4c0af80421 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_USB_HSO)		+= hso.o
 obj-$(CONFIG_USB_LAN78XX)	+= lan78xx.o
 obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
 asix-y := asix_devices.o asix_common.o ax88172a.o
-obj-$(CONFIG_USB_NET_AX88179_178A)      += ax88179.o
+obj-$(CONFIG_USB_NET_AX88179)      += ax88179.o
 ax88179-y := ax88179_178a.o ax88179a_devices.o ax88179_lib.o
 obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
 obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 8c22c2517cc08249c4e89625f142a76d4edc7d6a..6d6ee39b342e9b4e008bb2c1ee276dc27279a2f7 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1339,8 +1339,8 @@ static const struct usb_device_id products[] = {
 };
 MODULE_DEVICE_TABLE(usb, products);
 
-static struct usb_driver ax88179_178a_driver = {
-	.name =		"ax88179_178a",
+static struct usb_driver ax88179_driver = {
+	.name =		"ax88179",
 	.id_table =	products,
 	.probe =	usbnet_probe,
 	.suspend =	ax88179_suspend_wrapper,
@@ -1351,7 +1351,7 @@ static struct usb_driver ax88179_178a_driver = {
 	.disable_hub_initiated_lpm = 1,
 };
 
-module_usb_driver(ax88179_178a_driver);
+module_usb_driver(ax88179_driver);
 
-MODULE_DESCRIPTION("ASIX AX88179/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
+MODULE_DESCRIPTION("ASIX AX88179/179A/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
 MODULE_LICENSE("GPL");

-- 
2.47.3