[PATCH v6 3/3] usb: hub: send enumeration failure uevent

Emit a structured uevent when USB device enumeration fails in
hub_port_connect(), supplementing the existing error log with a
notification userspace can act on.

The event is emitted from the port's parent, the hub interface, because
usb_port devices have neither a bus nor a class and dev_uevent_filter()
drops any uevent sent from them. The failing port is named in the
payload.

Signed-off-by: Akshay Gujar <[email protected]>
---
 drivers/usb/core/hub.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5262e11c12cd3..78275dd702ceb 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5613,9 +5613,21 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 	if (hub->hdev->parent ||
 			!hcd->driver->port_handed_over ||
 			!(hcd->driver->port_handed_over)(hcd, port1)) {
-		if (status != -ENOTCONN && status != -ENODEV)
+		if (status != -ENOTCONN && status != -ENODEV) {
+			int ret;
 			dev_err(&port_dev->dev,
 					"unable to enumerate USB device\n");
+
+			/* usb_port has no bus or class, so uevents from it
+			 * are dropped; emit from the hub interface instead.
+			 */
+			ret = device_enumeration_failure_notify(port_dev->dev.parent,
+								dev_name(&port_dev->dev));
+			if (ret)
+				dev_warn(&port_dev->dev,
+					 "failed to send enumeration failure uevent: %d\n",
+					 ret);
+		}
 	}
 
 done:
-- 
2.19.0