[PATCH] usb: gadget: snps_udc_plat: clean up PHY on probe deferral

When the referenced extcon device has not registered yet,
extcon_get_edev_by_phandle() returns -EPROBE_DEFER after the driver has
initialized and powered on the PHY. The direct return bypasses the common
cleanup path and leaves both operations unbalanced.

Store the lookup error first and route deferred probing through exit_phy,
while retaining the existing behavior of suppressing the error message for
deferral.

This issue was identified during our ongoing static-analysis research while
reviewing kernel code.

Fixes: 1b9f35adb0ff ("usb: gadget: udc: Add Synopsys UDC Platform driver")
Cc: [email protected]
Signed-off-by: Ijae Kim <[email protected]>
Signed-off-by: Myeonghun Pak <[email protected]>
---
 drivers/usb/gadget/udc/snps_udc_plat.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
index db842a6de643..0ee3ed185d9c 100644
--- a/drivers/usb/gadget/udc/snps_udc_plat.c
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -159,10 +159,9 @@ static int udc_plat_probe(struct platform_device *pdev)
 	if (of_property_present(dev->of_node, "extcon")) {
 		udc->edev = extcon_get_edev_by_phandle(dev, 0);
 		if (IS_ERR(udc->edev)) {
-			if (PTR_ERR(udc->edev) == -EPROBE_DEFER)
-				return -EPROBE_DEFER;
-			dev_err(dev, "Invalid or missing extcon\n");
 			ret = PTR_ERR(udc->edev);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Invalid or missing extcon\n");
 			goto exit_phy;
 		}
 
-- 
2.47.1