[Bug 221861] ucsi_acpi fails to probe on HP EliteBook X G1a (PNP0CA0/USBC000:00), USB-PD stuck at 100W SPR, cannot reach 140W EPR
| Newsgroups | org.kernel.vger.linux-usb |
|---|---|
| Message-ID | <[email protected]/> |
https://bugzilla.kernel.org/show_bug.cgi?id=221861 --- Comment #6 from [email protected] --- Reproduces on stock Arch kernel 7.1.6-arch1-1 (not just CachyOS's patched linux-cachyos build) — same symptom: ucsi_acpi loaded, device present, driver never binds, zero dmesg output on both boot and manual bind attempt: ❯ uname -r lsmod | grep ucsi readlink /sys/bus/platform/devices/USBC000:00/driver sudo dmesg | grep -i ucsi 7.1.6-arch1-1 ucsi_acpi 12288 0 typec_ucsi 81920 1 ucsi_acpi roles 16384 1 typec_ucsi typec 135168 1 typec_ucsi Place your right index finger on the fingerprint reader Failed to match fingerprint Place your right index finger on the fingerprint reader [ 0.008172] ACPI: SSDT 0x00000000491E0000 001A39 (v02 HP UcsiAcpi 00000001 INTL 20200717) [ 0.008174] ACPI: SSDT 0x00000000491DF000 0000FB (v02 HP UcsiCntr 00000001 INTL 20200717) -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.