Re: [PATCH v2] net: usb: qmi_wwan: add Telit Cinterion FE990D50 composition

On Mon, Aug 10, 2026 at 3:07 PM Breno Leitao <[email protected]> wrote:
>
> On Mon, Aug 10, 2026 at 12:34:09PM +0200, Fabio Porcedda wrote:
> > Add the followin Telit Cinterion FE990D50 composition:
> >
> > 0x0991: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
> >         tty (diag) + ADPL + adb
> > T:  Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 10 Spd=480  MxCh= 0
> > D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > P:  Vendor=1bc7 ProdID=0991 Rev=06.06
> > S:  Manufacturer=Telit Cinterion
> > S:  Product=FE990
> > S:  SerialNumber=2aa802d2
> > C:  #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
> > I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
> > E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
> > I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> > E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
> > I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> > E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
> > I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> > E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
> > I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> > E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
> > I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> > E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > I:  If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
> > E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
> > E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> > E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> >
> > Cc: [email protected]
> > Signed-off-by: Fabio Porcedda <[email protected]>
> > ---
> > Changes:
> > v2:
> > - Add [email protected]
>
> Why CCing stable?

I've added it so it can be cherry-picked into the stable and long-term releases.
It should be legit for adding a device ID.

BR
-- 
Fabio Porcedda