[PATCH v2 10/14] arm64: dts: qcom: ipq5332: Add Super-Speed UNIPHY to USB node
George Moussalem via B4 Relay <[email protected]>
| Newsgroups | org.kernel.vger.linux-usb,org.infradead.lists.linux-phy,org.kernel.feeds.b4-sent,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Praveenkumar I <[email protected]> Add the USB3 UNIPHY node to the USB controller node. In addition, switch to the pipe clock supplied by the USB3 UNIPHY instead of the UTMI clock. Signed-off-by: Praveenkumar I <[email protected]> Signed-off-by: George Moussalem <[email protected]> --- arch/arm64/boot/dts/qcom/ipq5332.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 664586979ec4..6253443c8d7f 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -523,10 +523,8 @@ usb: usb@8a00000 { <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>; interconnect-names = "usb-ddr", "apps-usb"; - phys = <&usbphy0>; - phy-names = "usb2-phy"; - - qcom,select-utmi-as-pipe-clk; + phys = <&usbphy0>, <&usbphy1>; + phy-names = "usb2-phy", "usb3-phy"; tx-fifo-resize; snps,is-utmi-l1-suspend; -- 2.53.0