Re: [PATCH 1/3] dt-bindings: usb: Add Cypress cypd6129/cypd6229 Type-C controller

On Thu, Aug 20, 2026 at 08:17:36PM +0530, Akash Kumar wrote:
> Add the device-tree binding documentation for the Cypress cypd6129
> and cypd6229 dual Type-C PD controllers. These are used on Shikra
> CQM/CQS/IQS platforms to handle usb-role-switch for the USB Type-C
> ports over an I2C interface, similarly to the existing cypd4226
> binding.
> 
> cypd6229 is a variant of cypd6129 and is described with a
> "cypress,cypd6129" fallback compatible string.
> 
> Signed-off-by: Akash Kumar <[email protected]>
> ---
>  .../bindings/usb/cypress,cypd6129.yaml        | 99 +++++++++++++++++++
>  1 file changed, 99 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd6129.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd6129.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd6129.yaml
> new file mode 100644
> index 000000000000..f709f82f2092
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cypress,cypd6129.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/cypress,cypd6129.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cypress cypd6129/cypd6229 Type-C Controller
> +
> +maintainers:
> +  - Akash Kumar <[email protected]>
> +
> +description:
> +  The Cypress cypd6129 and cypd6229 are dual Type-C PD controllers that are
> +  controlled via an I2C interface.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: cypress,cypd6129
> +      - items:
> +          - const: cypress,cypd6229
> +          - const: cypress,cypd6129
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  pinctrl-0: true
> +  pinctrl-1: true
> +
> +  pinctrl-names:
> +    minItems: 1
> +    items:
> +      - const: default
> +      - const: sleep
> +
> +patternProperties:
> +  '^connector@[01]$':
> +    $ref: /schemas/connector/usb-connector.yaml#
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +anyOf:
> +  - required:
> +      - connector@0
> +  - required:
> +      - connector@1
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      typec@40 {
> +        compatible = "cypress,cypd6129";
> +        reg = <0x40>;
> +        interrupts-extended = <&tlmm 136 IRQ_TYPE_LEVEL_LOW>;
> +        pinctrl-0 = <&usb0_intr_state>;
> +        pinctrl-names = "default";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        connector@0 {
> +          compatible = "usb-c-connector";
> +          reg = <0>;
> +          label = "USB-C";
> +          data-role = "dual";
> +          power-role = "dual";
> +          wakeup-source;

whitespace nitpickery, blank line here

> +          ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;

and here

> +            port@0 {
> +              reg = <0>;

and here

Otherwise, this seems fine to me. With that,
Acked-by: Conor Dooley <[email protected]>

Cheers,
Conor.

pw-bot: changes-requested

> +              endpoint {
> +                remote-endpoint = <&usb_role_switch0>;
> +              };
> +            };
> +          };
> +        };
> +      };
> +    };
> -- 
> 2.43.0
>

-----BEGIN PGP SIGNATURE-----

iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaodCyQAKCRB4tDGHoIJi
0nHJAQD5e9L4rm14PG/FLac6A7fTUwTnqSGfMZJl0usvj5TtrAD/YEnba9EJK1ql
DDsUcq7lnK9BRG6E8pU3oAPXmOBIlgk=
=kld8
-----END PGP SIGNATURE-----