[PATCH 0/3] watchdog: ma35d1: Add support for MA35D1 Watchdog

This patch series introduces watchdog timer support for the Nuvoton MA35D1
SoC platform.

The MA35D1 watchdog timer hardware provides a programmable countdown timer
capable of triggering a system reset upon timeout expiration or generating
an interrupt to wake up the system from low-power states.

Key features supported in this driver:
 - Standard watchdog operations (start, stop, ping, set_timeout).
 - Boot status detection to identify watchdog reset events (WDIOF_CARDRESET).
 - Power management support including suspend/resume and wakeup functionality.

Series breakdown:
 - Patch 1: Add DT binding documentation for Nuvoton MA35D1 watchdog.
 - Patch 2: Add the watchdog driver implementation for MA35D1.
 - Patch 3: Add the watchdog node in the MA35D1 SoC DeviceTree file.

Testing:
 - Tested on the Nuvoton MA35D1 development board using standard watchdog
   test utilities (e.g., watchdog-test from tools/testing/selftests/watchdog).


Zi-Yu Chen (3):
  dt-bindings: watchdog: Add MA35D1 Watchdog binding
  watchdog: Add Nuvoton MA35D1 watchdog driver support
  arm64: dts: nuvoton: Add WDT node for MA35D1 SoC

 .../bindings/watchdog/nuvoton,ma35d1-wdt.yaml |  55 +++
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       |   7 +
 drivers/watchdog/Kconfig                      |  11 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/ma35d1_wdt.c                 | 357 ++++++++++++++++++
 5 files changed, 431 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/nuvoton,ma35d1-wdt.yaml
 create mode 100644 drivers/watchdog/ma35d1_wdt.c

-- 
2.34.1