[PATCH 1/2] wifi: p54: validate curve data length in p54_parse_eeprom()

p54_convert_rev0() and p54_convert_rev1() walk
channels * (2 + points_per_channel * sizeof(sample)) bytes of the
curve data entry, with both counts taken verbatim from the
device-supplied EEPROM. An entry that declares channels=255,
points_per_channel=255 but carries only the 4-byte header drives a
~191 KB slab-out-of-bounds read past the EEPROM buffer (verified with
a KASAN reproducer of the conversion loop). The sibling converters
p54_convert_output_limits() and p54_convert_db() already validate
their counts against the entry length; this path was missed.

Reject the entry when the counts do not fit in the entry data.

Fixes: eff1a59c48e3 ("[P54]: add mac80211-based driver for prism54 softmac hardware")
Cc: [email protected]
Assisted-by: GLM:5.3
Signed-off-by: Shengzhuo Wei <[email protected]>
---
 drivers/net/wireless/intersil/p54/eeprom.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/wireless/intersil/p54/eeprom.c b/drivers/net/wireless/intersil/p54/eeprom.c
index 95580921d933827c5eac55b79404e26bd7a57ba4..968ce9a411358e0e6b83117b1a077becc3207090 100644
--- a/drivers/net/wireless/intersil/p54/eeprom.c
+++ b/drivers/net/wireless/intersil/p54/eeprom.c
@@ -763,6 +763,8 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 		case PDR_PRISM_PA_CAL_CURVE_DATA: {
 			struct pda_pa_curve_data *curve_data =
 				(struct pda_pa_curve_data *)entry->data;
+			size_t needed;
+
 			if (data_len < sizeof(*curve_data)) {
 				err = -EINVAL;
 				goto err;
@@ -770,9 +772,23 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 
 			switch (curve_data->cal_method_rev) {
 			case 0:
+				needed = curve_data->channels *
+					(sizeof(struct pda_pa_curve_data_sample_rev0) *
+					 curve_data->points_per_channel + 2);
+				if (data_len - sizeof(*curve_data) < needed) {
+					err = -EINVAL;
+					goto err;
+				}
 				err = p54_convert_rev0(dev, curve_data);
 				break;
 			case 1:
+				needed = curve_data->channels *
+					(sizeof(struct pda_pa_curve_data_sample_rev1) *
+					 curve_data->points_per_channel + 3);
+				if (data_len - sizeof(*curve_data) < needed) {
+					err = -EINVAL;
+					goto err;
+				}
 				err = p54_convert_rev1(dev, curve_data);
 				break;
 			default:

-- 
2.47.3