Re: [PATCH v6 1/3] dt-bindings: net: wireless: add flag marvell,invalid-reg-hint-in-rom
George Valkov <[email protected]>
| Newsgroups | org.kernel.vger.linux-wireless,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.stable |
|---|---|
| Message-ID | <CADOrJmaF0UpRefk1+BDyn5iU5La4ke1gFWwzyRr5-9wp7Zr2+A@mail.gmail.com> |
On Thu, 27 Aug 2026 at 13:34, Krzysztof Kozlowski <[email protected]> wrote: > > On Fri, Aug 21, 2026 at 04:07:26AM +0300, Georgi Valkov wrote: > > WRT3200ACM and WRT32x routers always report a fixed US regulatory domain > > from the mwifiex ROM, which conflicts with the platform regulatory > > configuration on units sold outside the US market. For example: > > - phy0 mwlwifi 5 GHz, hard-coded region 98 EU mapped to FR > > - phy1 mwlwifi 2.4 GHz, hard-coded region 98 EU mapped to FR > > - phy2 mwifiex 2.4 and 5 GHz, hard-coded region US > > > > When the system boots, it detects a conflict between the user selected > > region and the radios, e.g. BG FR US, and applies extreme restrictions, > > preventing phy0 from starting on any DFS channel. phy2 works. > > > > Add a device-tree flag, which allows affected devices, where the radio > > conflicts with the platform to ignore the incorrect regulatory hint in > > the ROM of the radio, so the platform regulatory domain can be used. > > This does not allow the user to change the regulatory configuration of > > any radio. It only allows phy0 to start and operate according to its > > certified configuration. > > > > [1] https://github.com/kaloz/mwlwifi/issues/173#issuecomment-307879699 > > [2] https://github.com/openwrt/openwrt/issues/9956 > > > > Cc: [email protected] > > I don't think there is any bug to be fixed here. Support was incomplete, > so you add a missing quirk, but there was no bug in the binding. > Binding was correct. > > With stable dropped: > > Reviewed-by: Krzysztof Kozlowski <[email protected]> I added Reviewed-by to the first patch and sent v7 with these changes: 1. drop Cc: stable, the first patch only documents a binding 2. restore colon after Tested-on as requested by openwrt-ai 3. mention the added wifi@1 node https://lore.kernel.org/linux-wireless/[email protected]/T/#t Thank you for your help and patience! Georgi Valkov