Re: [lm-sensors] [PATCH 01/13] hwmon: convert lm75 to use devm_thermal_zone_of_sensor_register

Guenter Roeck <[email protected]> Thu, 10 Mar 2016 03:18:56 +0000
Newsgroups org.kernel.vger.lm-sensors,org.kernel.vger.linux-kernel,org.kernel.vger.linux-pm
Message-ID <[email protected]>
On 03/09/2016 01:35 PM, Eduardo Valentin wrote:
> This changes the driver to use the devm_ version
> of thermal_zone_of_sensor_register and cleans
> up the  local points and unregister calls.
>
> Cc: Jean Delvare <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Eduardo Valentin <[email protected]>

Acked-by: Guenter Roeck <[email protected]>

> ---
>   drivers/hwmon/lm75.c | 10 +++-------
>   1 file changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index 0addc84..69166ab 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -77,7 +77,6 @@ static const u8 LM75_REG_TEMP[3] = {
>   struct lm75_data {
>   	struct i2c_client	*client;
>   	struct device		*hwmon_dev;
> -	struct thermal_zone_device	*tz;
>   	struct mutex		update_lock;
>   	u8			orig_conf;
>   	u8			resolution;	/* In bits, between 9 and 12 */
> @@ -306,11 +305,9 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
>   	if (IS_ERR(data->hwmon_dev))
>   		return PTR_ERR(data->hwmon_dev);
>
> -	data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, 0,
> -						   data->hwmon_dev,
> -						   &lm75_of_thermal_ops);
> -	if (IS_ERR(data->tz))
> -		data->tz = NULL;
> +	devm_thermal_zone_of_sensor_register(data->hwmon_dev, 0,
> +					     data->hwmon_dev,
> +					     &lm75_of_thermal_ops);
>
>   	dev_info(dev, "%s: sensor '%s'\n",
>   		 dev_name(data->hwmon_dev), client->name);
> @@ -322,7 +319,6 @@ static int lm75_remove(struct i2c_client *client)
>   {
>   	struct lm75_data *data = i2c_get_clientdata(client);
>
> -	thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz);
>   	hwmon_device_unregister(data->hwmon_dev);
>   	lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
>   	return 0;
>


_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors