Re: [lm-sensors] [PATCH v3] hwmon/max6650.c: Add devicetree support

On 08/10/2016 07:19 AM, Mike Looijmans wrote:
> Parse devicetree parameters for voltage and prescaler setting. This allows
> using multiple max6550 devices with varying settings, and also makes it
> possible to instantiate and configure the device using devicetree.
>

For the subject: Please use "hwmon: (max6650) Add devicetree support"

> Signed-off-by: Mike Looijmans <[email protected]>
> ---
> v3: Resubmit because mailing lists bounced

It bounced because you sent to the old hwmon mailing list which is at best
unreliable. Please send future versions to [email protected].

>     Fix style errors as reported by checkpatch.pl
>     Fix bug in DT parsing of fan-prescale
> v2: Add devicetree binding documentation
>     Code changes as suggested by Guenter
>     Reduce log info, output only a single line
>
>  .../devicetree/bindings/hwmon/max6650.txt          | 20 ++++++++++++++++

Please submit the devicetree properties as separate patch.

>  drivers/hwmon/max6650.c                            | 28 +++++++++++++---------
>  2 files changed, 37 insertions(+), 11 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/max6650.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
> new file mode 100644
> index 0000000..89d87c6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/max6650.txt
> @@ -0,0 +1,20 @@
> +Bindings for MAX6651 and MAX6650 I2C fan controllers
> +
> +Required properties:
> +- compatible : One of "max6650" or "max6651"
> +- reg        : I2C address
> +
> +Optional properties:
> +- fan-voltage    : The supply voltage of the fan. Valid values are 5 and 12.
> +                   Default is to use the chip's current setting.
> +- fan-prescale   : Pre-scaling value as per datasheet. Valid are 1, 2, 4, 8, 16.
> +                   Default is to use the chip's current setting.
> +
> +
One empty line is sufficient.

> +Example:
> +	fan-max6650: max6650@1b {
> +		reg = <0x1b>;
> +		compatible = "max6650";
> +		fan-voltage = <12>;
> +		fan-prescale = <4>;
> +	};
> diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
> index 162a520..56a6c87 100644
> --- a/drivers/hwmon/max6650.c
> +++ b/drivers/hwmon/max6650.c
> @@ -41,14 +41,14 @@
>  #include <linux/err.h>
>
>  /*
> - * Insmod parameters
> + * Insmod parameters (for backward compatibility)

That doesn't add any value.

>   */
>
>  /* fan_voltage: 5=5V fan, 12V fan, 0=don't change */
>  static int fan_voltage;
>  /* prescaler: Possible values are 1, 2, 4, 8, 16 or 0 for don't change */
>  static int prescaler;
> -/* clock: The clock frequency of the chip the driver should assume */
> +/* clock: The clock frequency of the chip (max6651 can be clocked externally) */
>  static int clock = 254000;
>
>  module_param(fan_voltage, int, S_IRUGO);
> @@ -566,6 +566,15 @@ static int max6650_init_client(struct max6650_data *data,
>  	struct device *dev = &client->dev;
>  	int config;
>  	int err = -EIO;
> +	u32 voltage;
> +	u32 prescale;
> +
> +	if (of_property_read_u32(client->dev.of_node, "fan-voltage",
> +				 &voltage))
> +		voltage = fan_voltage;
> +	if (of_property_read_u32(client->dev.of_node, "fan-prescale",
> +				 &prescale))
> +		prescale = prescaler;
>
>  	config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);
>
> @@ -574,7 +583,7 @@ static int max6650_init_client(struct max6650_data *data,
>  		return err;
>  	}
>
> -	switch (fan_voltage) {
> +	switch (voltage) {
>  	case 0:
>  		break;
>  	case 5:
> @@ -584,14 +593,10 @@ static int max6650_init_client(struct max6650_data *data,
>  		config |= MAX6650_CFG_V12;
>  		break;
>  	default:
> -		dev_err(dev, "illegal value for fan_voltage (%d)\n",
> -			fan_voltage);
> +		dev_err(dev, "illegal value for fan_voltage (%d)\n", voltage);
>  	}
>
> -	dev_info(dev, "Fan voltage is set to %dV.\n",
> -		 (config & MAX6650_CFG_V12) ? 12 : 5);
> -
> -	switch (prescaler) {
> +	switch (prescale) {
>  	case 0:
>  		break;
>  	case 1:
> @@ -614,10 +619,11 @@ static int max6650_init_client(struct max6650_data *data,
>  			 | MAX6650_CFG_PRESCALER_16;
>  		break;
>  	default:
> -		dev_err(dev, "illegal value for prescaler (%d)\n", prescaler);
> +		dev_err(dev, "illegal value for prescaler (%d)\n", prescale);

Side note: Those errors should really result in an -EINVAL return.
Separate patch, though.

>  	}
>
> -	dev_info(dev, "Prescaler is set to %d.\n",
> +	dev_info(dev, "Fan voltage: %dV, prescaler: %d.\n",
> +		 (config & MAX6650_CFG_V12) ? 12 : 5,
>  		 1 << (config & MAX6650_CFG_PRESCALER_MASK));
>
>  	/*
>


_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors