[PATCH 17/21] arm64: dts: allwinner: h616: add ACx00 EPHY resources
James Hilliard <[email protected]>
| Newsgroups | org.kernel.vger.netdev,dev.linux.lists.linux-sunxi,dev.linux.lists.mfd,org.infradead.lists.linux-arm-kernel,org.infradead.lists.linux-rockchip,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Expose logical SID cells for the AC200/AC300 EPHY calibration, the combined companion-variant and AC300-calibration-range configuration, and the AC200 bandgap fields. Also describe the PA10/PA11 I2C3 pin group used by the AC200 control interface. Signed-off-by: James Hilliard <[email protected]> --- arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index 6879f27c2b2b..2cedda6e87a9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -252,6 +252,20 @@ ths_calibration: thermal-sensor-calibration@14 { cpu_speed_grade: cpu-speed-grade@0 { reg = <0x0 2>; }; + + ephy_calibration: ethernet-phy-calibration@2c,0 { + reg = <0x2c 1>; + bits = <0 4>; + }; + + ephy_config: ethernet-phy-configuration@2c { + reg = <0x2c 2>; + bits = <8 2>; + }; + + ac200_bandgap: bandgap@30 { + reg = <0x30 2>; + }; }; timer0: timer@3009000 { @@ -324,6 +338,13 @@ i2c0_pins: i2c0-pins { function = "i2c0"; }; + /omit-if-no-ref/ + i2c3_pa_pins: i2c3-pa-pins { + pins = "PA10", "PA11"; + function = "i2c3"; + bias-pull-up; + }; + i2c3_ph_pins: i2c3-ph-pins { pins = "PH4", "PH5"; function = "i2c3"; -- 2.53.0