Re: [PATCH v3 15/22] dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset generator

"Rob Herring (Arm)" <[email protected]>
Newsgroups org.kernel.vger.netdev,org.infradead.lists.linux-riscv,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-hardening,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
On Fri, 07 Aug 2026 04:29:16 -0700, Changhuang Liang wrote:
> Add bindings for the Peripheral-1 clock and reset generator (PER1CRG)
> on the JHB100 RISC-V SoC by StarFive Ltd.
> 
> Signed-off-by: Changhuang Liang <[email protected]>
> Reviewed-by: Rob Herring (Arm) <[email protected]>
> ---
>  .../clock/starfive,jhb100-per1crg.yaml        | 70 +++++++++++++++++++
>  .../dt-bindings/clock/starfive,jhb100-crg.h   | 60 ++++++++++++++++
>  .../dt-bindings/reset/starfive,jhb100-crg.h   | 19 +++++
>  3 files changed, 149 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per1crg.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/mediatek/mediatek,mt8196-tdshp.example.dtb: tdshp@321e0000 (mediatek,mt8196-disp-tdshp): 'clock-names' is a required property
	from schema $id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8196-tdshp.yaml
Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.example.dtb: display0: fsl,pcr: b'\xf0\xc8\x80\x80' is not of type 'object', 'integer', 'array', 'boolean', 'null'
	from schema $id: http://devicetree.org/schemas/dt-core.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/[email protected]

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.