[net-next,PATCH v2 4/5] arm64: dts: st: add 3v3 regulator to ethernet on stm32mp257f-dk

Christophe Roullier <[email protected]>
Newsgroups org.kernel.vger.netdev,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]> 
The Ethernet PHY is supplied by 3v3 PMIC regulator, add it to Ethernet
node.

Signed-off-by: Christophe Roullier <[email protected]>
---
 arch/arm64/boot/dts/st/stm32mp257f-dk.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
index 8daf3dfd51339..e98a773448ee9 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
@@ -144,6 +144,7 @@ &ethernet1 {
 	pinctrl-names = "default", "sleep";
 	phy-handle = <&phy1_eth1>;
 	phy-mode = "rgmii-id";
+	phy-supply = <&scmi_v3v3>;
 	status = "okay";
 
 	mdio {
-- 
2.43.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.