[PATCH net-next v13 02/11] enic: add admin channel open and close for SR-IOV

The V2 SR-IOV design uses a dedicated admin channel (WQ/RQ/CQ
resources plus an MSI-X interrupt) for PF-VF mailbox communication rather
than firmware-proxied devcmds.

Introduce enic_admin_channel_open() and enic_admin_channel_close().
Open allocates and initialises the admin WQ, RQ, and two CQs (one per
direction), then issues CMD_QP_TYPE_SET to tell firmware the queues are
admin-type. Close reverses the sequence.

enic_admin_wq_buf_clean() unmaps and frees any WQ buffers still held
at close time, fixing a DMA mapping leak when a send times out.

Add CMD_QP_TYPE_SET (97), QP_TYPE_ADMIN/DATA, and QP_ENABLE/QP_DISABLE
defines to vnic_devcmd.h. Add VNIC_CQ_* named constants to vnic_cq.h
so CQ initialisation parameters are self-documenting from their first
introduction.

Signed-off-by: Satish Kharat <[email protected]>
---
 drivers/net/ethernet/cisco/enic/Makefile      |   3 +-
 drivers/net/ethernet/cisco/enic/enic.h        |   5 +
 drivers/net/ethernet/cisco/enic/enic_admin.c  | 227 ++++++++++++++++++++++++++
 drivers/net/ethernet/cisco/enic/enic_admin.h  |  15 ++
 drivers/net/ethernet/cisco/enic/vnic_cq.h     |   9 +
 drivers/net/ethernet/cisco/enic/vnic_devcmd.h |  11 ++
 6 files changed, 269 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cisco/enic/Makefile b/drivers/net/ethernet/cisco/enic/Makefile
index a96b8332e6e2..7ae72fefc99a 100644
--- a/drivers/net/ethernet/cisco/enic/Makefile
+++ b/drivers/net/ethernet/cisco/enic/Makefile
@@ -3,5 +3,6 @@ obj-$(CONFIG_ENIC) := enic.o
 
 enic-y := enic_main.o vnic_cq.o vnic_intr.o vnic_wq.o \
 	enic_res.o enic_dev.o enic_pp.o vnic_dev.o vnic_rq.o vnic_vic.o \
-	enic_ethtool.o enic_api.o enic_clsf.o enic_rq.o enic_wq.o
+	enic_ethtool.o enic_api.o enic_clsf.o enic_rq.o enic_wq.o \
+	enic_admin.o
 
diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h
index 08472420f3a1..398227448b37 100644
--- a/drivers/net/ethernet/cisco/enic/enic.h
+++ b/drivers/net/ethernet/cisco/enic/enic.h
@@ -292,6 +292,11 @@ struct enic {
 
 	/* Admin channel resources for SR-IOV MBOX */
 	bool has_admin_channel;
+	/* true only while the admin WQ/RQ/CQ are allocated and enabled; gates
+	 * enic_admin_channel_close() so it is a no-op after a failed (re)open
+	 * left the resources freed.
+	 */
+	bool admin_chan_up;
 	struct vnic_wq admin_wq;
 	struct vnic_rq admin_rq;
 	struct vnic_cq admin_cq[2];
diff --git a/drivers/net/ethernet/cisco/enic/enic_admin.c b/drivers/net/ethernet/cisco/enic/enic_admin.c
new file mode 100644
index 000000000000..50b46b92c88f
--- /dev/null
+++ b/drivers/net/ethernet/cisco/enic/enic_admin.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2025 Cisco Systems, Inc.  All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "vnic_cq.h"
+#include "vnic_intr.h"
+#include "vnic_resource.h"
+#include "vnic_devcmd.h"
+#include "enic.h"
+#include "enic_admin.h"
+#include "cq_desc.h"
+#include "wq_enet_desc.h"
+#include "rq_enet_desc.h"
+
+/* Clean up any admin WQ buffers still held by hardware at close time.
+ * Normally buffers are freed inline after send completion, but a timed-out
+ * send intentionally leaves the buffer live until the queue is stopped.
+ */
+static void enic_admin_wq_buf_clean(struct vnic_wq *wq,
+				    struct vnic_wq_buf *buf)
+{
+	struct enic *enic = vnic_dev_priv(wq->vdev);
+
+	if (buf->os_buf) {
+		dma_unmap_single(&enic->pdev->dev, buf->dma_addr,
+				 buf->len, DMA_TO_DEVICE);
+		kfree(buf->os_buf);
+		buf->os_buf = NULL;
+	}
+}
+
+/* No-op: admin RQ buffer teardown is handled in enic_admin_channel_close */
+static void enic_admin_rq_buf_clean(struct vnic_rq *rq,
+				    struct vnic_rq_buf *buf)
+{
+}
+
+static int enic_admin_qp_type_set(struct enic *enic, u32 enable)
+{
+	u64 a0 = QP_TYPE_ADMIN, a1 = enable;
+	int wait = 1000;
+	int err;
+
+	spin_lock_bh(&enic->devcmd_lock);
+	err = vnic_dev_cmd(enic->vdev, CMD_QP_TYPE_SET, &a0, &a1, wait);
+	spin_unlock_bh(&enic->devcmd_lock);
+
+	return err;
+}
+
+static int enic_admin_alloc_resources(struct enic *enic)
+{
+	int err;
+
+	err = vnic_wq_alloc_with_type(enic->vdev, &enic->admin_wq, 0,
+				      ENIC_ADMIN_DESC_COUNT,
+				      sizeof(struct wq_enet_desc),
+				      RES_TYPE_ADMIN_WQ);
+	if (err)
+		return err;
+
+	err = vnic_rq_alloc_with_type(enic->vdev, &enic->admin_rq, 0,
+				      ENIC_ADMIN_DESC_COUNT,
+				      sizeof(struct rq_enet_desc),
+				      RES_TYPE_ADMIN_RQ);
+	if (err)
+		goto free_wq;
+
+	/* admin_cq[0] is the WQ completion queue.  WQ CQEs are always
+	 * 16 bytes wide; firmware always writes 16-byte CQEs for WQ
+	 * completions on every WQ, including the admin channel WQ.
+	 * Use sizeof(struct cq_desc) accordingly.
+	 */
+	err = vnic_cq_alloc_with_type(enic->vdev, &enic->admin_cq[0], 0,
+				      ENIC_ADMIN_DESC_COUNT,
+				      sizeof(struct cq_desc),
+				      RES_TYPE_ADMIN_CQ);
+	if (err)
+		goto free_rq;
+
+	/* admin_cq[1] is the RQ completion queue.  Its descriptor size
+	 * must match what firmware writes.  enic_ext_cq() called earlier
+	 * in probe issues CMD_CQ_ENTRY_SIZE_SET for VNIC_RQ_ALL,
+	 * programming firmware to write CQ entries of (16 << enic->ext_cq)
+	 * bytes for every RQ CQ on the vNIC, including the admin RQ CQ.
+	 * Allocating with the same size keeps the host poller and
+	 * firmware in lockstep:
+	 *
+	 *   - The color/valid bit lives at byte (desc_size - 1) of every
+	 *     cq_enet_rq_desc[_32|_64] variant, so enic_admin_cq_color()
+	 *     reads it from the correct offset.
+	 *   - Only the first 15 bytes of the descriptor (vlan,
+	 *     bytes_written_flags, ...) are accessed by the admin path;
+	 *     these fields are identical across all three variants (see
+	 *     comment in enic_rq.c above cq_enet_rq_desc_dec()).
+	 */
+	err = vnic_cq_alloc_with_type(enic->vdev, &enic->admin_cq[1], 1,
+				      ENIC_ADMIN_DESC_COUNT,
+				      16 << enic->ext_cq,
+				      RES_TYPE_ADMIN_CQ);
+	if (err)
+		goto free_cq0;
+
+	return 0;
+
+free_cq0:
+	vnic_cq_free(&enic->admin_cq[0]);
+free_rq:
+	vnic_rq_free(&enic->admin_rq);
+free_wq:
+	vnic_wq_free(&enic->admin_wq);
+	return err;
+}
+
+static void enic_admin_free_resources(struct enic *enic)
+{
+	vnic_cq_free(&enic->admin_cq[1]);
+	vnic_cq_free(&enic->admin_cq[0]);
+	vnic_rq_free(&enic->admin_rq);
+	vnic_wq_free(&enic->admin_wq);
+}
+
+static void enic_admin_init_resources(struct enic *enic)
+{
+	vnic_wq_init(&enic->admin_wq,
+		     0, 0, 0); /* cq_index, err_intr_enable, err_intr_offset */
+	vnic_rq_init(&enic->admin_rq,
+		     1, 0, 0); /* cq_index, err_intr_enable, err_intr_offset */
+	vnic_cq_init(&enic->admin_cq[0],
+		     VNIC_CQ_FC_DISABLE,
+		     VNIC_CQ_COLOR_ENABLE,
+		     0, 0, 1, /* cq_head, cq_tail, cq_tail_color */
+		     VNIC_CQ_INTR_DISABLE,
+		     VNIC_CQ_ENTRY_ENABLE,
+		     VNIC_CQ_MSG_DISABLE,
+		     0, /* interrupt_offset */
+		     0 /* cq_message_addr */);
+	vnic_cq_init(&enic->admin_cq[1],
+		     VNIC_CQ_FC_DISABLE,
+		     VNIC_CQ_COLOR_ENABLE,
+		     0, 0, 1, /* cq_head, cq_tail, cq_tail_color */
+		     VNIC_CQ_INTR_DISABLE,
+		     VNIC_CQ_ENTRY_ENABLE,
+		     VNIC_CQ_MSG_DISABLE,
+		     0, /* interrupt_offset */
+		     0 /* cq_message_addr */);
+}
+
+int enic_admin_channel_open(struct enic *enic)
+{
+	int err;
+
+	if (!enic->has_admin_channel)
+		return -ENODEV;
+
+	err = enic_admin_alloc_resources(enic);
+	if (err) {
+		netdev_err(enic->netdev,
+			   "Failed to alloc admin channel resources: %d\n",
+			   err);
+		return err;
+	}
+
+	enic_admin_init_resources(enic);
+
+	vnic_wq_enable(&enic->admin_wq);
+	vnic_rq_enable(&enic->admin_rq);
+
+	err = enic_admin_qp_type_set(enic, QP_ENABLE);
+	if (err) {
+		netdev_err(enic->netdev,
+			   "Failed to set admin QP type: %d\n", err);
+		goto disable_queues;
+	}
+
+	enic->admin_chan_up = true;
+
+	return 0;
+
+disable_queues:
+	enic_admin_qp_type_set(enic, QP_DISABLE);
+	if (vnic_wq_disable(&enic->admin_wq))
+		netdev_warn(enic->netdev, "Failed to disable admin WQ\n");
+	if (vnic_rq_disable(&enic->admin_rq))
+		netdev_warn(enic->netdev, "Failed to disable admin RQ\n");
+	enic_admin_free_resources(enic);
+	return err;
+}
+
+void enic_admin_channel_close(struct enic *enic)
+{
+	int err;
+
+	if (!enic->has_admin_channel)
+		return;
+
+	/* Nothing to tear down if the channel was never (re)opened, e.g. a
+	 * failed enic_admin_channel_open() in probe or in the reset path;
+	 * otherwise the disable/clean calls below dereference freed resources.
+	 */
+	if (!enic->admin_chan_up)
+		return;
+
+	enic_admin_qp_type_set(enic, QP_DISABLE);
+
+	err = vnic_wq_disable(&enic->admin_wq);
+	if (err)
+		netdev_warn(enic->netdev,
+			    "Failed to disable admin WQ: %d\n", err);
+	err = vnic_rq_disable(&enic->admin_rq);
+	if (err)
+		netdev_warn(enic->netdev,
+			    "Failed to disable admin RQ: %d\n", err);
+
+	vnic_wq_clean(&enic->admin_wq, enic_admin_wq_buf_clean);
+	vnic_rq_clean(&enic->admin_rq, enic_admin_rq_buf_clean);
+	vnic_cq_clean(&enic->admin_cq[0]);
+	vnic_cq_clean(&enic->admin_cq[1]);
+	enic_admin_free_resources(enic);
+
+	enic->admin_chan_up = false;
+}
diff --git a/drivers/net/ethernet/cisco/enic/enic_admin.h b/drivers/net/ethernet/cisco/enic/enic_admin.h
new file mode 100644
index 000000000000..569aadeb9312
--- /dev/null
+++ b/drivers/net/ethernet/cisco/enic/enic_admin.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright 2025 Cisco Systems, Inc.  All rights reserved. */
+
+#ifndef _ENIC_ADMIN_H_
+#define _ENIC_ADMIN_H_
+
+#define ENIC_ADMIN_DESC_COUNT	64
+#define ENIC_ADMIN_BUF_SIZE	2048
+
+struct enic;
+
+int enic_admin_channel_open(struct enic *enic);
+void enic_admin_channel_close(struct enic *enic);
+
+#endif /* _ENIC_ADMIN_H_ */
diff --git a/drivers/net/ethernet/cisco/enic/vnic_cq.h b/drivers/net/ethernet/cisco/enic/vnic_cq.h
index d46d4d2ef6bb..35ffa3230713 100644
--- a/drivers/net/ethernet/cisco/enic/vnic_cq.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_cq.h
@@ -76,6 +76,15 @@ int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index,
 int vnic_cq_alloc_with_type(struct vnic_dev *vdev, struct vnic_cq *cq,
 			    unsigned int index, unsigned int desc_count,
 			    unsigned int desc_size, unsigned int res_type);
+#define VNIC_CQ_FC_ENABLE	1
+#define VNIC_CQ_FC_DISABLE	0
+#define VNIC_CQ_COLOR_ENABLE	1
+#define VNIC_CQ_INTR_ENABLE	1
+#define VNIC_CQ_INTR_DISABLE	0
+#define VNIC_CQ_ENTRY_ENABLE	1
+#define VNIC_CQ_MSG_ENABLE	1
+#define VNIC_CQ_MSG_DISABLE	0
+
 void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable,
 	unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail,
 	unsigned int cq_tail_color, unsigned int interrupt_enable,
diff --git a/drivers/net/ethernet/cisco/enic/vnic_devcmd.h b/drivers/net/ethernet/cisco/enic/vnic_devcmd.h
index 3b6efa743dba..90ca06691ebd 100644
--- a/drivers/net/ethernet/cisco/enic/vnic_devcmd.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_devcmd.h
@@ -455,8 +455,19 @@ enum vnic_devcmd_cmd {
 	 */
 	CMD_CQ_ENTRY_SIZE_SET = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 90),
 
+	/*
+	 * Set queue pair type (admin or data)
+	 * in: (u32) a0 = queue pair type (0 = admin, 1 = data)
+	 * in: (u32) a1 = enable (1) / disable (0)
+	 */
+	CMD_QP_TYPE_SET = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 97),
 };
 
+#define QP_TYPE_ADMIN	0
+#define QP_TYPE_DATA	1
+#define QP_ENABLE	1
+#define QP_DISABLE	0
+
 /* CMD_ENABLE2 flags */
 #define CMD_ENABLE2_STANDBY 0x0
 #define CMD_ENABLE2_ACTIVE  0x1

-- 
2.43.0