Re: [PATCH net v3] net: phylink: treat PSGMII as an inband capable interface

[email protected]
Newsgroups org.kernel.vger.netdev,org.kernel.vger.linux-kernel
Message-ID <178667786689.3150297.13780382184308922141.git-patchwork-notify@kernel.org>
Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <[email protected]>:

On Sun, 09 Aug 2026 21:31:41 +0530 you wrote:
> PSGMII (the Qualcomm 5-port SGMII) conveys the link negotiation result
> from the PHY back to the MAC through per-channel in-band SGMII words,
> exactly like SGMII and QSGMII.
> 
> However, PHY_INTERFACE_MODE_PSGMII is missing from
> phylink_get_inband_type(), so phylink reports INBAND_NONE for it and
> phylink_pcs_neg_mode() falls back to PHYLINK_PCS_NEG_NONE. The PCS is
> then programmed in force mode and its control-register speed bits (which
> default to 1000base) are used, so a slower copper link - e.g. 100base-T
> - is reported as 1Gbps and cannot pass traffic.
> 
> [...]

Here is the summary with links:
  - [net,v3] net: phylink: treat PSGMII as an inband capable interface
    https://git.kernel.org/netdev/net-next/c/5ba017f9efef

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.