[PATCH net v1 1/1] net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO

From: Ahmad Fatoum <[email protected]>

rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical.  When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:

  WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
  Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
  Workqueue: events_unbound deferred_probe_work_func
  pc : gpiod_set_value+0x44/0x80
  lr : rtl83xx_probe+0x1d8/0x3a0
  Call trace:
   gpiod_set_value+0x44/0x80 (P)
   rtl83xx_probe+0x1d8/0x3a0
   realtek_mdio_probe+0x24/0xa0
   mdio_probe+0x38/0x78
   really_probe+0xc4/0x3e0
   __driver_probe_device+0x15c/0x1b8
   driver_probe_device+0xb4/0x120
   __device_attach_driver+0xb8/0x1a0
   bus_for_each_drv+0x88/0xf0
   __device_attach+0xa0/0x1d8
   device_initial_probe+0x54/0x68
   bus_probe_device+0x38/0xa0
   deferred_probe_work_func+0xb8/0x120
   process_one_work+0x184/0x4e8
   worker_thread+0x188/0x308
   kthread+0x130/0x150
   ret_from_fork+0x10/0x20

Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
be used without triggering the warning.

The reset GPIO has been driven with the non-sleeping gpiod_set_value()
since the driver was added in v4.19.  The call has since been refactored
across several files - from realtek-smi.c / realtek-mdio.c into the common
rtl83xx.c module and then into the rtl83xx_reset_assert() and
rtl83xx_reset_deassert() helpers (both in v6.9).  This patch therefore
applies as-is only to kernels that carry those helpers (v6.9+); older
stable kernels need the same gpiod_set_value_cansleep() conversion at the
corresponding open-coded call sites.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: <[email protected]> # 6.9.x
Signed-off-by: Ahmad Fatoum <[email protected]>
Co-developed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Oleksij Rempel <[email protected]>
---
 drivers/net/dsa/realtek/rtl83xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c
index 09fd64880232..8121ec12fd8b 100644
--- a/drivers/net/dsa/realtek/rtl83xx.c
+++ b/drivers/net/dsa/realtek/rtl83xx.c
@@ -334,7 +334,7 @@ void rtl83xx_reset_assert(struct realtek_priv *priv)
 			 "Failed to assert the switch reset control: %pe\n",
 			 ERR_PTR(ret));
 
-	gpiod_set_value(priv->reset, true);
+	gpiod_set_value_cansleep(priv->reset, true);
 }
 
 void rtl83xx_reset_deassert(struct realtek_priv *priv)
@@ -347,7 +347,7 @@ void rtl83xx_reset_deassert(struct realtek_priv *priv)
 			 "Failed to deassert the switch reset control: %pe\n",
 			 ERR_PTR(ret));
 
-	gpiod_set_value(priv->reset, false);
+	gpiod_set_value_cansleep(priv->reset, false);
 }
 
 /**
-- 
2.47.3