Re: [PATCH net 2/8] net: bcmgenet: initialize u64 stats seq counter for all queues

On 18.9.2026 02:07, Florian Fainelli wrote:
> bcmgenet_gstrings_stats statically defines ethtool statistics for 
> queues
> 0 through GENET_MAX_MQ_CNT (4). However, bcmgenet_probe() only 
> initialized
> the u64_stats_sync seq counter up to priv->hw_params->rx_queues and
> priv->hw_params->tx_queues.
> 
> Since priv->hw_params->rx_queues is 0 across all hardware versions (and
> priv->hw_params->tx_queues is 0 on GENET V1), rings 1..4 have 
> uninitialized
> u64_stats_sync structures. When ethtool -S is run on 32-bit kernels,
> bcmgenet_get_ethtool_stats() reads stats from rx_rings[1..4], causing
> lockdep warnings due to the uninitialized sequence counters.
> 
> Initialize the sequence counters for all GENET_MAX_MQ_CNT + 1 queues.
> 
> Fixes: ffc2c8c4a714 ("net: bcmgenet: Initialize u64 stats seq counter")
> Assisted-by: LLM
> Co-authored-by: Cursor <[email protected]>
> Change-Id: I6c3debbd9fa5e7a151789fccf3d9a38db184f434
> ---
>  drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c 
> b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index 7b089de9484e..055e1362173b 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> @@ -4134,10 +4134,10 @@ static int bcmgenet_probe(struct 
> platform_device *pdev)
>  		priv->rx_rings[i].rx_max_coalesced_frames = 1;
> 
>  	/* Initialize u64 stats seq counter for 32bit machines */
> -	for (i = 0; i <= priv->hw_params->rx_queues; i++)
> +	for (i = 0; i <= GENET_MAX_MQ_CNT; i++) {
>  		u64_stats_init(&priv->rx_rings[i].stats64.syncp);
> -	for (i = 0; i <= priv->hw_params->tx_queues; i++)
>  		u64_stats_init(&priv->tx_rings[i].stats64.syncp);
> +	}
> 
>  	/* libphy will determine the link state */
>  	netif_carrier_off(dev);

Reviewed-by: Nicolai Buchwitz <[email protected]>

Thanks,
Nicolai